From: Can Guo <cang@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
hongwus@codeaurora.org, ziqichen@codeaurora.org,
linux-scsi@vger.kernel.org, kernel-team@android.com,
cang@codeaurora.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bean Huo <beanhuo@micron.com>, Jaegeuk Kim <jaegeuk@kernel.org>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 5/9] scsi: ufs: Simplify error handling preparation
Date: Wed, 9 Jun 2021 21:43:33 -0700 [thread overview]
Message-ID: <1623300218-9454-6-git-send-email-cang@codeaurora.org> (raw)
In-Reply-To: <1623300218-9454-1-git-send-email-cang@codeaurora.org>
Commit cb7e6f05fce67c965194ac04467e1ba7bc70b069 ("scsi: ufs: core: Enable
power management for wlun") moves UFS operations out of ufshcd_resume(), so
in error handling preparation, if ufshcd hba has failed to resume, there is
no point to re-enable IRQ/clk/pwr.
Signed-off-by: Can Guo <cang@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 58 +++++++++++++++++++++++++----------------------
1 file changed, 31 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 7dc0fda..0afad6b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2727,8 +2727,8 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
break;
case UFSHCD_STATE_EH_SCHEDULED_FATAL:
/*
- * pm_runtime_get_sync() is used at error handling preparation
- * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's
+ * ufshcd_rpm_get_sync() is used at error handling preparation
+ * stage. If a scsi cmd, e.g., the SSU cmd, is sent from the
* PM ops, it can never be finished if we let SCSI layer keep
* retrying it, which gets err handler stuck forever. Neither
* can we let the scsi cmd pass through, because UFS is in bad
@@ -5915,29 +5915,26 @@ static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend)
}
}
-static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
+static int ufshcd_err_handling_prepare(struct ufs_hba *hba)
{
+ /*
+ * Exclusively call pm_runtime_get_sync(hba->dev) once, in case
+ * following ufshcd_rpm_get_sync() fails.
+ */
+ pm_runtime_get_sync(hba->dev);
+ /* End of the world. */
+ if (pm_runtime_suspended(hba->dev)) {
+ pm_runtime_put(hba->dev);
+ return -EINVAL;
+ }
+
+ ufshcd_set_eh_in_progress(hba);
ufshcd_rpm_get_sync(hba);
- if (pm_runtime_status_suspended(&hba->sdev_ufs_device->sdev_gendev) ||
+ if (pm_runtime_suspended(&hba->sdev_ufs_device->sdev_gendev) ||
hba->is_wl_sys_suspended) {
- enum ufs_pm_op pm_op;
+ enum ufs_pm_op pm_op = hba->is_wl_sys_suspended ?
+ UFS_SYSTEM_PM : UFS_RUNTIME_PM;
- /*
- * Don't assume anything of resume, if
- * resume fails, irq and clocks can be OFF, and powers
- * can be OFF or in LPM.
- */
- ufshcd_setup_hba_vreg(hba, true);
- ufshcd_setup_vreg(hba, true);
- ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq);
- ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2);
- ufshcd_hold(hba, false);
- if (!ufshcd_is_clkgating_allowed(hba)) {
- ufshcd_setup_clocks(hba, true);
- ufshcd_enable_irq(hba);
- }
- ufshcd_release(hba);
- pm_op = hba->is_wl_sys_suspended ? UFS_SYSTEM_PM : UFS_RUNTIME_PM;
ufshcd_vops_resume(hba, pm_op);
} else {
ufshcd_hold(hba, false);
@@ -5951,22 +5948,25 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
down_write(&hba->clk_scaling_lock);
up_write(&hba->clk_scaling_lock);
cancel_work_sync(&hba->eeh_work);
+ return 0;
}
static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
{
+ ufshcd_clear_eh_in_progress(hba);
ufshcd_scsi_unblock_requests(hba);
ufshcd_release(hba);
if (ufshcd_is_clkscaling_supported(hba))
ufshcd_clk_scaling_suspend(hba, false);
ufshcd_clear_ua_wluns(hba);
ufshcd_rpm_put(hba);
+ pm_runtime_put(hba->dev);
}
static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
{
return (!hba->is_powered || hba->shutting_down ||
- !hba->sdev_ufs_device ||
+ !hba->sdev_ufs_device || hba->is_sys_suspended ||
hba->ufshcd_state == UFSHCD_STATE_ERROR ||
(!(hba->saved_err || hba->saved_uic_err || hba->force_reset ||
ufshcd_is_link_broken(hba))));
@@ -6052,9 +6052,13 @@ static void ufshcd_err_handler(struct work_struct *work)
up(&hba->host_sem);
return;
}
- ufshcd_set_eh_in_progress(hba);
spin_unlock_irqrestore(hba->host->host_lock, flags);
- ufshcd_err_handling_prepare(hba);
+ if (ufshcd_err_handling_prepare(hba)) {
+ dev_err(hba->dev, "%s: error handling preparation failed\n",
+ __func__);
+ up(&hba->host_sem);
+ return;
+ }
/* Complete requests that have door-bell cleared by h/w */
ufshcd_complete_requests(hba);
spin_lock_irqsave(hba->host->host_lock, flags);
@@ -6198,7 +6202,6 @@ static void ufshcd_err_handler(struct work_struct *work)
dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x",
__func__, hba->saved_err, hba->saved_uic_err);
}
- ufshcd_clear_eh_in_progress(hba);
spin_unlock_irqrestore(hba->host->host_lock, flags);
ufshcd_err_handling_unprepare(hba);
up(&hba->host_sem);
@@ -8999,6 +9002,9 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
/* Enable Auto-Hibernate if configured */
ufshcd_auto_hibern8_enable(hba);
+
+ hba->clk_gating.is_suspended = false;
+ ufshcd_release(hba);
goto out;
set_old_link_state:
@@ -9008,8 +9014,6 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
out:
if (ret)
ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
- hba->clk_gating.is_suspended = false;
- ufshcd_release(hba);
hba->wl_pm_op_in_progress = false;
return ret <= 0 ? ret : -EINVAL;
}
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2021-06-10 4:44 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 4:43 [PATCH v3 0/9] Complementary changes for error handling Can Guo
2021-06-10 4:43 ` [PATCH v3 1/9] scsi: ufs: Differentiate status between hba pm ops and wl pm ops Can Guo
2021-06-10 11:15 ` Adrian Hunter
2021-06-11 0:53 ` Can Guo
2021-06-11 20:40 ` Bart Van Assche
2021-06-12 6:20 ` Can Guo
2021-06-16 17:50 ` Bart Van Assche
2021-06-23 1:32 ` Can Guo
2021-06-10 4:43 ` [PATCH v3 2/9] scsi: ufs: Update the return value of supplier " Can Guo
2021-06-10 4:43 ` [PATCH v3 3/9] scsi: ufs: Enable IRQ after enabling clocks in error handling preparation Can Guo
2021-06-10 4:43 ` [PATCH v3 4/9] scsi: ufs: Complete the cmd before returning in queuecommand Can Guo
2021-06-11 20:52 ` Bart Van Assche
2021-06-12 7:38 ` Can Guo
2021-06-12 15:50 ` Bart Van Assche
2021-06-13 13:30 ` Can Guo
2021-06-10 4:43 ` Can Guo [this message]
2021-06-10 12:30 ` [PATCH v3 5/9] scsi: ufs: Simplify error handling preparation Adrian Hunter
2021-06-11 3:01 ` Can Guo
2021-06-11 20:58 ` Bart Van Assche
2021-06-12 6:46 ` Can Guo
2021-06-12 9:49 ` Can Guo
2021-06-10 4:43 ` [PATCH v3 6/9] scsi: ufs: Update ufshcd_recover_pm_error() Can Guo
2021-06-10 4:43 ` [PATCH v3 7/9] scsi: ufs: Let host_sem cover the entire system suspend/resume Can Guo
2021-06-10 13:32 ` Adrian Hunter
2021-06-11 3:06 ` Can Guo
2021-06-11 21:00 ` Bart Van Assche
2021-06-12 6:46 ` Can Guo
2021-06-10 4:43 ` [PATCH v3 8/9] scsi: ufs: Update the fast abort path in ufshcd_abort() for PM requests Can Guo
2021-06-11 21:02 ` Bart Van Assche
2021-06-12 7:07 ` Can Guo
2021-06-12 16:50 ` Bart Van Assche
2021-06-13 14:42 ` Can Guo
2021-06-14 18:49 ` Bart Van Assche
2021-06-15 2:36 ` Can Guo
2021-06-15 3:17 ` Can Guo
2021-06-15 18:25 ` Bart Van Assche
2021-06-16 4:00 ` Can Guo
2021-06-16 4:40 ` Bart Van Assche
2021-06-16 8:47 ` Can Guo
2021-06-16 17:55 ` Bart Van Assche
2021-06-23 1:34 ` Can Guo
2021-06-10 4:43 ` [PATCH v3 9/9] scsi: ufs: Apply more limitations to user access Can Guo
2021-06-11 21:03 ` Bart Van Assche
2021-06-12 7:13 ` Can Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623300218-9454-6-git-send-email-cang@codeaurora.org \
--to=cang@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=hongwus@codeaurora.org \
--cc=jaegeuk@kernel.org \
--cc=jejb@linux.ibm.com \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nguyenb@codeaurora.org \
--cc=stanley.chu@mediatek.com \
--cc=ziqichen@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.