From: Masami Hiramatsu <masami.hiramatsu@linaro.org>
To: Peng Fan <peng.fan@nxp.com>, Simon Glass <sjg@chromium.org>,
Tom Rini <trini@konsulko.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Alexander Graf <agraf@csgraf.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Vignesh R <vigneshr@ti.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Sughosh Ganu <sughosh.ganu@linaro.org>
Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Masahisa Kojima <masahisa.kojima@linaro.org>,
Takahiro Akashi <takahiro.akashi@linaro.org>,
Tim Harvey <tharvey@gateworks.com>, Bin Meng <bmeng.cn@gmail.com>,
u-boot@lists.denx.de, Jaehoon Chung <jh80.chung@samsung.com>
Subject: [PATCH v5 04/13] gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs
Date: Fri, 4 Jun 2021 18:43:55 +0900 [thread overview]
Message-ID: <162279983491.518877.7210710307554354679.stgit@localhost> (raw)
In-Reply-To: <162279979193.518877.11119025270138617301.stgit@localhost>
Since some SoCs and boards do not hae extra asm/arch/gpio.h,
introduce CONFIG_GPIO_EXTRA_HEADER instead of adding
!define(CONFIG_ARCH_XXXX) in asm/gpio.h.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
---
Changes in v3:
- Change the config name to positive and selected by the
opposite CONFIG_ARCH_*. (Build checked by Github CI)
---
arch/arm/Kconfig | 94 +++++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/gpio.h | 8 ----
2 files changed, 95 insertions(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 31d687ea01..023824df77 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -90,6 +90,9 @@ config HAS_VBAR
config HAS_THUMB2
bool
+config GPIO_EXTRA_HEADER
+ bool
+
# Used for compatibility with asm files copied from the kernel
config ARM_ASM_UNIFIED
bool
@@ -518,25 +521,30 @@ choice
config ARCH_AT91
bool "Atmel AT91"
+ select GPIO_EXTRA_HEADER
select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
select SPL_SEPARATE_BSS if SPL
config TARGET_EDB93XX
bool "Support edb93xx"
select CPU_ARM920T
+ select GPIO_EXTRA_HEADER
select PL010_SERIAL
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
config TARGET_GPLUGD
bool "Support gplugd"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select SPL_DM_SPI if SPL
imply CMD_SAVES
help
@@ -547,6 +555,7 @@ config ARCH_KIRKWOOD
select ARCH_MISC_INIT
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
config ARCH_MVEBU
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
@@ -555,6 +564,7 @@ config ARCH_MVEBU
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select GPIO_EXTRA_HEADER
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
select OF_CONTROL
@@ -565,11 +575,13 @@ config ARCH_MVEBU
config ARCH_ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
config TARGET_SPEAR300
bool "Support spear300"
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
imply CMD_SAVES
@@ -577,6 +589,7 @@ config TARGET_SPEAR310
bool "Support spear310"
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
imply CMD_SAVES
@@ -584,6 +597,7 @@ config TARGET_SPEAR320
bool "Support spear320"
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
imply CMD_SAVES
@@ -591,6 +605,7 @@ config TARGET_SPEAR600
bool "Support spear600"
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
imply CMD_SAVES
@@ -601,6 +616,7 @@ config TARGET_STV0991
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select GPIO_EXTRA_HEADER
select PL01X_SERIAL
select SPI
select SPI_FLASH
@@ -610,18 +626,21 @@ config TARGET_X600
bool "Support x600"
select BOARD_LATE_INIT
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
select SUPPORT_SPL
config TARGET_FLEA3
bool "Support flea3"
select CPU_ARM1136
+ select GPIO_EXTRA_HEADER
config ARCH_BCM283X
bool "Broadcom BCM283X family"
select DM
select DM_GPIO
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
select SERIAL_SEARCH_ALL
@@ -650,6 +669,7 @@ config ARCH_BCMSTB
bool "Broadcom BCM7XXX family"
select CPU_V7A
select DM
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select OF_PRIOR_STAGE
imply CMD_DM
@@ -660,6 +680,7 @@ config ARCH_BCMSTB
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7A
+ select GPIO_EXTRA_HEADER
imply BCM_SF2_ETH
imply BCM_SF2_ETH_GMAC
imply CMD_HASH
@@ -671,6 +692,7 @@ config TARGET_BCMCYGNUS
config TARGET_BCMNS2
bool "Support Broadcom Northstar2"
select ARM64
+ select GPIO_EXTRA_HEADER
help
Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
ARMv8 Cortex-A57 processors targeting a broad range of networking
@@ -695,6 +717,7 @@ config ARCH_EXYNOS
select DM_SPI
select DM_SPI_FLASH
select SPI
+ select GPIO_EXTRA_HEADER
imply SYS_THUMB_BUILD
imply CMD_DM
imply FAT_WRITE
@@ -706,6 +729,7 @@ config ARCH_S5PC1XX
select DM_GPIO
select DM_I2C
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
imply CMD_DM
config ARCH_HIGHBANK
@@ -726,6 +750,7 @@ config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select PL01X_SERIAL
imply CMD_DM
@@ -736,6 +761,7 @@ config ARCH_IPQ40XX
select DM_GPIO
select DM_SERIAL
select DM_RESET
+ select GPIO_EXTRA_HEADER
select MSM_SMEM
select PINCTRL
select CLK
@@ -747,6 +773,7 @@ config ARCH_KEYSTONE
bool "TI Keystone"
select CMD_POWEROFF
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SUPPORT_SPL
select SYS_ARCH_TIMER
select SYS_THUMB_BUILD
@@ -763,6 +790,7 @@ config ARCH_K3
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SPL_BOARD_INIT if SPL
select SPL_STACK_R if SPL
select SUPPORT_SPL
@@ -771,6 +799,7 @@ config ARCH_OMAP2PLUS
config ARCH_MESON
bool "Amlogic Meson"
+ select GPIO_EXTRA_HEADER
imply DISTRO_DEFAULTS
imply DM_RNG
help
@@ -781,6 +810,7 @@ config ARCH_MESON
config ARCH_MEDIATEK
bool "MediaTek SoCs"
select DM
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPL_DM if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
@@ -797,6 +827,7 @@ config ARCH_LPC32XX
select DM
select DM_GPIO
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select SPL_DM if SPL
select SUPPORT_SPL
imply CMD_DM
@@ -805,12 +836,14 @@ config ARCH_IMX8
bool "NXP i.MX8 platform"
select ARM64
select DM
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select ENABLE_ARM_SOC_BOOT0_HOOK
config ARCH_IMX8M
bool "NXP i.MX8M platform"
select ARM64
+ select GPIO_EXTRA_HEADER
select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
@@ -823,33 +856,39 @@ config ARCH_IMXRT
select CPU_V7M
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select SUPPORT_SPL
imply CMD_DM
config ARCH_MX23
bool "NXP i.MX23 family"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
select SUPPORT_SPL
config ARCH_MX25
bool "NXP MX25"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
imply MXC_GPIO
config ARCH_MX28
bool "NXP i.MX28 family"
select CPU_ARM926EJS
+ select GPIO_EXTRA_HEADER
select PL011_SERIAL
select SUPPORT_SPL
config ARCH_MX31
bool "NXP i.MX31 family"
select CPU_ARM1136
+ select GPIO_EXTRA_HEADER
config ARCH_MX7ULP
bool "NXP MX7ULP"
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
@@ -861,6 +900,7 @@ config ARCH_MX7
bool "Freescale MX7"
select ARCH_MISC_INIT
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
@@ -871,6 +911,7 @@ config ARCH_MX7
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
@@ -886,18 +927,21 @@ config ARCH_MX5
bool "Freescale MX5"
select BOARD_EARLY_INIT_F
select CPU_V7A
+ select GPIO_EXTRA_HEADER
imply MXC_GPIO
config ARCH_NEXELL
bool "Nexell S5P4418/S5P6818 SoC"
select ENABLE_ARM_SOC_BOOT0_HOOK
select DM
+ select GPIO_EXTRA_HEADER
config ARCH_OWL
bool "Actions Semi OWL SoCs"
select DM
select DM_ETH
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OWL_SERIAL
select CLK
select CLK_OWL
@@ -920,6 +964,7 @@ config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
imply BOARD_EARLY_INIT_F
imply CMD_DM
imply FAT_WRITE
@@ -932,6 +977,7 @@ config ARCH_SNAPDRAGON
select DM
select DM_GPIO
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select MSM_SMEM
select OF_CONTROL
select OF_SEPARATE
@@ -947,6 +993,7 @@ config ARCH_SOCFPGA
select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select OF_CONTROL
select SPL_DM_RESET if DM_RESET
@@ -998,6 +1045,7 @@ config ARCH_SUNXI
select DM_SCSI if SCSI
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
+ select GPIO_EXTRA_HEADER
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
@@ -1057,6 +1105,7 @@ config ARCH_VERSAL
select DM_ETH if NET
select DM_MMC if MMC
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
imply BOARD_LATE_INIT
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -1064,6 +1113,7 @@ config ARCH_VERSAL
config ARCH_VF610
bool "Freescale Vybrid"
select CPU_V7A
+ select GPIO_EXTRA_HEADER
select SYS_FSL_ERRATUM_ESDHC111
imply CMD_MTDPARTS
imply MTD_RAW_NAND
@@ -1080,6 +1130,7 @@ config ARCH_ZYNQ
select DM_SPI
select DM_SPI_FLASH
select DM_USB if USB
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPI
select SPL_BOARD_INIT if SPL
@@ -1106,6 +1157,7 @@ config ARCH_ZYNQMP_R5
select DM_ETH if NET
select DM_MMC if MMC
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
imply CMD_DM
imply DM_USB_GADGET
@@ -1123,6 +1175,7 @@ config ARCH_ZYNQMP
select DM_SPI_FLASH if DM_SPI
select DM_USB if USB
select FIRMWARE
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
@@ -1143,23 +1196,27 @@ config ARCH_ZYNQMP
config ARCH_TEGRA
bool "NVIDIA Tegra"
+ select GPIO_EXTRA_HEADER
imply DISTRO_DEFAULTS
imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select ARM64
+ select GPIO_EXTRA_HEADER
select PL01X_SERIAL
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
+ select GPIO_EXTRA_HEADER
select PL01X_SERIAL
select SEMIHOSTING
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
+ select GPIO_EXTRA_HEADER
select PL01X_SERIAL
select DM
select OF_CONTROL
@@ -1188,6 +1245,7 @@ config TARGET_LS2080A_EMU
select ARM64
select ARMV8_MULTIENTRY
select FSL_DDR_SYNC_REFRESH
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS2080A_EMU platform.
The LS2080A Development System (EMULATOR) is a pre-silicon
@@ -1201,6 +1259,7 @@ config TARGET_LS1088AQDS
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
help
@@ -1216,6 +1275,7 @@ config TARGET_LS2080AQDS
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
select SUPPORT_SPL
imply SCSI
imply SCSI_AHCI
@@ -1237,6 +1297,7 @@ config TARGET_LS2080ARDB
select SUPPORT_SPL
select FSL_DDR_BIST
select FSL_DDR_INTERACTIVE if !SPL
+ select GPIO_EXTRA_HEADER
imply SCSI
imply SCSI_AHCI
help
@@ -1251,6 +1312,7 @@ config TARGET_LS2081ARDB
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
select SUPPORT_SPL
help
Support for Freescale LS2081ARDB platform.
@@ -1265,6 +1327,7 @@ config TARGET_LX2160ARDB
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for NXP LX2160ARDB platform.
The lx2160ardb (LX2160A Reference design board (RDB)
@@ -1278,6 +1341,7 @@ config TARGET_LX2160AQDS
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for NXP LX2160AQDS platform.
The lx2160aqds (LX2160A QorIQ Development System (QDS)
@@ -1292,6 +1356,7 @@ config TARGET_LX2162AQDS
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for NXP LX2162AQDS platform.
The lx2162aqds support is based on LX2160A Layerscape Architecture processor.
@@ -1302,6 +1367,7 @@ config TARGET_HIKEY
select DM
select DM_GPIO
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
select SPECIFY_CONSOLE_INDEX
@@ -1315,6 +1381,7 @@ config TARGET_HIKEY960
select ARM64
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
imply CMD_DM
@@ -1328,6 +1395,7 @@ config TARGET_POPLAR
select DM
select DM_SERIAL
select DM_USB
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
imply CMD_DM
@@ -1343,6 +1411,7 @@ config TARGET_LS1012AQDS
select ARM64
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS1012AQDS platform.
The LS1012A Development System (QDS) is a high-performance
@@ -1355,6 +1424,7 @@ config TARGET_LS1012ARDB
select ARM64
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
imply SCSI
imply SCSI_AHCI
help
@@ -1369,6 +1439,7 @@ config TARGET_LS1012A2G5RDB
select ARM64
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
imply SCSI
help
Support for Freescale LS1012A2G5RDB platform.
@@ -1382,6 +1453,7 @@ config TARGET_LS1012AFRWY
select ARM64
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
imply SCSI
imply SCSI_AHCI
help
@@ -1395,6 +1467,7 @@ config TARGET_LS1012AFRDM
select ARCH_LS1012A
select ARM64
select ARCH_SUPPORT_TFABOOT
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS1012AFRDM platform.
The LS1012A Freedom board (FRDM) is a high-performance
@@ -1408,6 +1481,7 @@ config TARGET_LS1028AQDS
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS1028AQDS platform
The LS1028A Development System (QDS) is a high-performance
@@ -1421,6 +1495,7 @@ config TARGET_LS1028ARDB
select ARMV8_MULTIENTRY
select ARCH_SUPPORT_TFABOOT
select BOARD_LATE_INIT
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS1028ARDB platform
The LS1028A Development System (RDB) is a high-performance
@@ -1436,6 +1511,7 @@ config TARGET_LS1088ARDB
select BOARD_LATE_INIT
select SUPPORT_SPL
select FSL_DDR_INTERACTIVE if !SD_BOOT
+ select GPIO_EXTRA_HEADER
help
Support for NXP LS1088ARDB platform.
The LS1088A Reference design board (RDB) is a high-performance
@@ -1456,6 +1532,7 @@ config TARGET_LS1021AQDS
select SYS_FSL_DDR
select FSL_DDR_INTERACTIVE
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+ select GPIO_EXTRA_HEADER
select SPI_FLASH_DATAFLASH if FSL_DSPI || FSL_QSPI
imply SCSI
@@ -1471,6 +1548,7 @@ config TARGET_LS1021ATWR
select LS1_DEEP_SLEEP
select SUPPORT_SPL
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+ select GPIO_EXTRA_HEADER
imply SCSI
config TARGET_PG_WCOM_SELI8
@@ -1484,6 +1562,7 @@ config TARGET_PG_WCOM_SELI8
select CPU_V7_HAS_VIRT
select SYS_FSL_DDR
select FSL_DDR_INTERACTIVE
+ select GPIO_EXTRA_HEADER
select VENDOR_KM
imply SCSI
help
@@ -1502,6 +1581,7 @@ config TARGET_LS1021ATSN
select CPU_V7_HAS_VIRT
select LS1_DEEP_SLEEP
select SUPPORT_SPL
+ select GPIO_EXTRA_HEADER
imply SCSI
config TARGET_LS1021AIOT
@@ -1514,6 +1594,7 @@ config TARGET_LS1021AIOT
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
+ select GPIO_EXTRA_HEADER
imply SCSI
help
Support for Freescale LS1021AIOT platform.
@@ -1533,6 +1614,7 @@ config TARGET_LS1043AQDS
select FSL_DDR_INTERACTIVE if !SPL
select FSL_DSPI if !SPL_NO_DSPI
select DM_SPI_FLASH if FSL_DSPI
+ select GPIO_EXTRA_HEADER
imply SCSI
imply SCSI_AHCI
help
@@ -1549,6 +1631,7 @@ config TARGET_LS1043ARDB
select SUPPORT_SPL
select FSL_DSPI if !SPL_NO_DSPI
select DM_SPI_FLASH if FSL_DSPI
+ select GPIO_EXTRA_HEADER
help
Support for Freescale LS1043ARDB platform.
@@ -1565,6 +1648,7 @@ config TARGET_LS1046AQDS
select FSL_DDR_BIST if !SPL
select FSL_DDR_INTERACTIVE if !SPL
select FSL_DDR_INTERACTIVE if !SPL
+ select GPIO_EXTRA_HEADER
imply SCSI
help
Support for Freescale LS1046AQDS platform.
@@ -1585,6 +1669,7 @@ config TARGET_LS1046ARDB
select SUPPORT_SPL
select FSL_DDR_BIST
select FSL_DDR_INTERACTIVE if !SPL
+ select GPIO_EXTRA_HEADER
imply SCSI
help
Support for Freescale LS1046ARDB platform.
@@ -1601,6 +1686,7 @@ config TARGET_LS1046AFRWY
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
+ select GPIO_EXTRA_HEADER
imply SCSI
help
Support for Freescale LS1046AFRWY platform.
@@ -1629,6 +1715,7 @@ config TARGET_SL28
select DM_SERIAL
select DM_SPI
select DM_USB
+ select GPIO_EXTRA_HEADER
select SPL_DM if SPL
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
@@ -1641,6 +1728,7 @@ config TARGET_SL28
config TARGET_COLIBRI_PXA270
bool "Support colibri_pxa270"
select CPU_PXA
+ select GPIO_EXTRA_HEADER
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
@@ -1677,6 +1765,7 @@ config ARCH_STM32
select CPU_V7M
select DM
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
imply CMD_DM
config ARCH_STI
@@ -1702,6 +1791,7 @@ config ARCH_STM32MP
select DM_GPIO
select DM_RESET
select DM_SERIAL
+ select GPIO_EXTRA_HEADER
select MISC
select OF_CONTROL
select OF_LIBFDT
@@ -1764,6 +1854,7 @@ config ARCH_OCTEONTX
bool "Support OcteonTX SoCs"
select CLK
select DM
+ select GPIO_EXTRA_HEADER
select ARM64
select OF_CONTROL
select OF_LIVE
@@ -1774,6 +1865,7 @@ config ARCH_OCTEONTX2
bool "Support OcteonTX2 SoCs"
select CLK
select DM
+ select GPIO_EXTRA_HEADER
select ARM64
select OF_CONTROL
select OF_LIVE
@@ -1783,6 +1875,7 @@ config ARCH_OCTEONTX2
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
select ARM64
+ select GPIO_EXTRA_HEADER
select OF_CONTROL
select PL01X_SERIAL
select SYS_CACHE_SHIFT_7
@@ -1796,6 +1889,7 @@ config ARCH_ASPEED
config TARGET_DURIAN
bool "Support Phytium Durian Platform"
select ARM64
+ select GPIO_EXTRA_HEADER
help
Support for durian platform.
It has 2GB Sdram, uart and pcie.
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 7609367884..650783ae73 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,10 +1,4 @@
-#if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \
- !defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM68360) && \
- !defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
- !defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
- !defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
- !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE) && \
- !defined(CONFIG_ARCH_QEMU)
+#ifdef CONFIG_GPIO_EXTRA_HEADER
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>
next prev parent reply other threads:[~2021-06-04 9:44 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 9:43 [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 01/13] ata: ahci-pci: Use scsi_ops to initialize ops Masami Hiramatsu
2021-07-06 22:50 ` Tom Rini
2021-07-07 22:47 ` Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 02/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 03/13] efi: Fix to use null handle to create new handle for efi_fmp_raw Masami Hiramatsu
2021-06-04 9:43 ` Masami Hiramatsu [this message]
2021-06-04 9:44 ` [PATCH v5 05/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 06/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 07/13] spi: synquacer: Add HSSPI SPI controller driver for SynQuacer Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 08/13] net: synquacer: Add netsec driver Masami Hiramatsu
2021-06-12 18:32 ` Ramon Fried
2021-06-12 18:39 ` Ramon Fried
2021-06-04 9:44 ` [PATCH v5 09/13] i2c: synquacer: SNI Synquacer I2C controller Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 11/13] board: synquacer: Add DeveloperBox 96boards EE support Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 12/13] doc: qemu: arm64: Fix the documentation of capsule update Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 13/13] configs: synquacer: Enable EFI capsule update support Masami Hiramatsu
2021-06-11 7:25 ` [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support Masami Hiramatsu
2021-06-11 8:05 ` Ilias Apalodimas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162279983491.518877.7210710307554354679.stgit@localhost \
--to=masami.hiramatsu@linaro.org \
--cc=agraf@csgraf.de \
--cc=bmeng.cn@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jagan@amarulasolutions.com \
--cc=jaswinder.singh@linaro.org \
--cc=jh80.chung@samsung.com \
--cc=joe.hershberger@ni.com \
--cc=masahisa.kojima@linaro.org \
--cc=peng.fan@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=sjg@chromium.org \
--cc=sughosh.ganu@linaro.org \
--cc=takahiro.akashi@linaro.org \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.