From: Masami Hiramatsu <masami.hiramatsu@linaro.org>
To: Peng Fan <peng.fan@nxp.com>, Simon Glass <sjg@chromium.org>,
Tom Rini <trini@konsulko.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Alexander Graf <agraf@csgraf.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Vignesh R <vigneshr@ti.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Sughosh Ganu <sughosh.ganu@linaro.org>
Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Masahisa Kojima <masahisa.kojima@linaro.org>,
Takahiro Akashi <takahiro.akashi@linaro.org>,
Tim Harvey <tharvey@gateworks.com>, Bin Meng <bmeng.cn@gmail.com>,
u-boot@lists.denx.de, Jaehoon Chung <jh80.chung@samsung.com>
Subject: [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support
Date: Fri, 4 Jun 2021 18:43:12 +0900 [thread overview]
Message-ID: <162279979193.518877.11119025270138617301.stgit@localhost> (raw)
Hi,
Here is the 5th version of the series (including some fixes for build
errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
This series includes not only DeveloperBox support but also some fixes
for the issues which I faced while porting U-Boot on the DeveloperBox.
First 3 patches are fixes, next 1 patch is a code cleanup for generic
gpio for arm. The next 7 patches adding DeveloperBox devices
and board support. The last 2 patches are related to the UEFI capsule
update.
Previous version is here:
https://lists.denx.de/pipermail/u-boot/2021-May/449305.html
Changes in v5
-------------
I dripped dfu_mtd bugfix patch (previous [12/14]) from this,
because Sughosh already fixed it.
[11/13]:
- Remove log level from config.
DeveloperBox
============
DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: -
* Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard
* 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
* 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots
(1x slots are connected via PCIe bridge chip)
* 4 USB-3.0 ports
* 2 SATA ports
* 1 GbE network port
* 1 USB-UART serial port (micro USB)
* 64MB SPI NOR Flash
* 8GB eMMC Flash Storage
* 96boards LS connector
The DeveloperBox schematic can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf
And the other documents can be found here: -
https://www.96boards.org/documentation/enterprise/developerbox/
Currently, the U-Boot port supports: -
* USB
* eMMC
* SPI-NOR
* SATA
* GbE
The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default.
The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as
BL33, but no need to combine with it.
Thank you,
---
Jassi Brar (4):
mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
spi: synquacer: Add HSSPI SPI controller driver for SynQuacer
net: synquacer: Add netsec driver
i2c: synquacer: SNI Synquacer I2C controller
Masami Hiramatsu (9):
ata: ahci-pci: Use scsi_ops to initialize ops
dm: pci: Skip setting VGA bridge bits if parent device is the host bus
efi: Fix to use null handle to create new handle for efi_fmp_raw
gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs
pci: synquacer: Add SynQuacer ECAM based PCIe driver
ARM: dts: synquacer: Add device trees for DeveloperBox
board: synquacer: Add DeveloperBox 96boards EE support
doc: qemu: arm64: Fix the documentation of capsule update
configs: synquacer: Enable EFI capsule update support
arch/arm/Kconfig | 108 ++
arch/arm/dts/Makefile | 2
arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 +
.../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 75 +
arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 +
arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++
arch/arm/include/asm/gpio.h | 8
board/socionext/developerbox/Kconfig | 36 +
board/socionext/developerbox/MAINTAINERS | 14
board/socionext/developerbox/Makefile | 9
board/socionext/developerbox/developerbox.c | 146 +++
configs/synquacer_developerbox_defconfig | 129 ++
doc/board/emulation/qemu_capsule_update.rst | 11
doc/board/index.rst | 1
doc/board/socionext/developerbox.rst | 87 ++
doc/board/socionext/index.rst | 9
drivers/ata/ahci-pci.c | 2
drivers/i2c/Kconfig | 7
drivers/i2c/Makefile | 1
drivers/i2c/synquacer_i2c.c | 338 ++++++
drivers/mmc/Kconfig | 10
drivers/mmc/Makefile | 1
drivers/mmc/f_sdh30.c | 81 +
drivers/net/Kconfig | 8
drivers/net/Makefile | 1
drivers/net/sni_netsec.c | 1134 ++++++++++++++++++++
drivers/pci/Kconfig | 12
drivers/pci/Makefile | 1
drivers/pci/pci-uclass.c | 3
drivers/pci/pcie_ecam_synquacer.c | 600 +++++++++++
drivers/spi/Kconfig | 8
drivers/spi/Makefile | 1
drivers/spi/spi-synquacer.c | 491 +++++++++
include/configs/synquacer.h | 115 ++
lib/efi_loader/efi_capsule.c | 2
35 files changed, 4158 insertions(+), 17 deletions(-)
create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi
create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts
create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi
create mode 100644 board/socionext/developerbox/Kconfig
create mode 100644 board/socionext/developerbox/MAINTAINERS
create mode 100644 board/socionext/developerbox/Makefile
create mode 100644 board/socionext/developerbox/developerbox.c
create mode 100644 configs/synquacer_developerbox_defconfig
create mode 100644 doc/board/socionext/developerbox.rst
create mode 100644 doc/board/socionext/index.rst
create mode 100644 drivers/i2c/synquacer_i2c.c
create mode 100644 drivers/mmc/f_sdh30.c
create mode 100644 drivers/net/sni_netsec.c
create mode 100644 drivers/pci/pcie_ecam_synquacer.c
create mode 100644 drivers/spi/spi-synquacer.c
create mode 100644 include/configs/synquacer.h
--
Masami Hiramatsu <masami.hiramatsu@linaro.org>
next reply other threads:[~2021-06-04 9:43 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 9:43 Masami Hiramatsu [this message]
2021-06-04 9:43 ` [PATCH v5 01/13] ata: ahci-pci: Use scsi_ops to initialize ops Masami Hiramatsu
2021-07-06 22:50 ` Tom Rini
2021-07-07 22:47 ` Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 02/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 03/13] efi: Fix to use null handle to create new handle for efi_fmp_raw Masami Hiramatsu
2021-06-04 9:43 ` [PATCH v5 04/13] gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 05/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 06/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 07/13] spi: synquacer: Add HSSPI SPI controller driver for SynQuacer Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 08/13] net: synquacer: Add netsec driver Masami Hiramatsu
2021-06-12 18:32 ` Ramon Fried
2021-06-12 18:39 ` Ramon Fried
2021-06-04 9:44 ` [PATCH v5 09/13] i2c: synquacer: SNI Synquacer I2C controller Masami Hiramatsu
2021-06-04 9:44 ` [PATCH v5 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 11/13] board: synquacer: Add DeveloperBox 96boards EE support Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 12/13] doc: qemu: arm64: Fix the documentation of capsule update Masami Hiramatsu
2021-06-04 9:45 ` [PATCH v5 13/13] configs: synquacer: Enable EFI capsule update support Masami Hiramatsu
2021-06-11 7:25 ` [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support Masami Hiramatsu
2021-06-11 8:05 ` Ilias Apalodimas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162279979193.518877.11119025270138617301.stgit@localhost \
--to=masami.hiramatsu@linaro.org \
--cc=agraf@csgraf.de \
--cc=bmeng.cn@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jagan@amarulasolutions.com \
--cc=jaswinder.singh@linaro.org \
--cc=jh80.chung@samsung.com \
--cc=joe.hershberger@ni.com \
--cc=masahisa.kojima@linaro.org \
--cc=peng.fan@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=sjg@chromium.org \
--cc=sughosh.ganu@linaro.org \
--cc=takahiro.akashi@linaro.org \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.