From: Brian Hutchinson <b.hutchman@gmail.com>
To: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Daiane Angolini <daiane.angolini@foundries.io>,
meta-freescale@lists.yoctoproject.org
Subject: Re: [meta-freescale] Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk)
Date: Wed, 6 Sep 2023 12:52:01 -0400 [thread overview]
Message-ID: <CAFZh4h8A4Z16KHCi34tg7Pa0tDirm0yEg+7XkPMhsZLXj5-p6g@mail.gmail.com> (raw)
In-Reply-To: <17824EC1AA68A4AB.2662@lists.yoctoproject.org>
[-- Attachment #1.1: Type: text/plain, Size: 3739 bytes --]
Top posting as I found my problem. Wow, they couldn't have made it any
more confusing. Attached is a pic of the dip switch setting that made it
boot from SD Card.
See attached picture or:
Switch - Setting
1 - off
2 - on
3 - off
4 - off
I broke down and built the imx93evk from NXP and even that didn't work so
started playing with switch settings and found the issue.
Regards,
Brian
On Wed, Sep 6, 2023, 8:23 AM Brian Hutchinson via lists.yoctoproject.org
<b.hutchman=gmail.com@lists.yoctoproject.org> wrote:
> On Wed, Sep 6, 2023 at 7:49 AM Daiane Angolini
> <daiane.angolini@foundries.io> wrote:
> >
> > On Tue, Sep 5, 2023 at 8:01 PM Brian Hutchinson <b.hutchman@gmail.com>
> wrote:
> > >
> > > Hi Daiane,
> > >
> > > On Tue, Sep 5, 2023 at 5:32 PM Daiane Angolini
> > > <daiane.angolini@foundries.io> wrote:
> > > >
> > > > On Tue, Sep 5, 2023 at 4:21 PM Brian Hutchinson <
> b.hutchman@gmail.com> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > I recently obtained a imx93 evk board and wanted to build fsl
> > > > > community bsp distro for it.
> > > > >
> > > > > I generated a core-image-base sdcard image using DISTRO=poky
> > > > > MACHINE=imx93-11x11-lpddr4x-evk but it doesn't boot ... so sign of
> > > > > life on console ... no lights blinking, no u-boot output etc..
> > > >
> > > > Do you know which is the imx-boot you are using on your image? Are
> you
> > > > flashing the sdcard with a .wic? using uuu?
> > >
> > > Looks like it built u-boot-imx and is version 2022.04-r0
> > >
> > > I did a dd of the .wic.gz that core-image-base produced to a sdcard
> > > and set the dip switches to 0010 (also tried 1010) to boot from sdcard
> > > instead of eMMC. The uncompressed .wic file size was 322611200.
> >
> > I remember I got confused with the dip switches' orientation. But if
> > you have another working image, so your board is properly configured.
> >
> Which image did you build? I rebuilt core-image-base from master
> using DISTRO=fslc-framebuffer and once again got the same result ...
> no sign of board booting so I must be missing something or not doing
> something right.
>
> Regards,
>
> Brian
>
> > Daiane
> > >
> > > >
> > > > When I tested it, I used DISTRO=fslc-framebuffer.
> > >
> > > I just rebuilt again from master and got same result. Maybe I'll try
> > > same distro you did and see what happens.
> > >
> > > Thanks,
> > >
> > > Brian
> > >
> > > >
> > > > The last time I tested it worked fine.
> > > >
> > > > Daiane
> > > >
> > > > >
> > > > > I just want a minimal distro that supports a serial console (via
> the
> > > > > USB debug cable) and networking at the moment. On imx8mm-evk I
> used
> > > > > core-image-base to start work on my own custom OS so thought that
> > > > > would be a good starting point with this imx93 board too but not
> sure
> > > > > meta-freescale fully supports the imx93 evk yet. I built kirkstone
> > > > > and it had machine support and everything built ok, but maybe
> > > > > something else is missing.
> > > > >
> > > > > I searched the archives and I don't see any mention of the imx93
> evk yet.
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Brian
> > > > >
> > > > >
> > > > >
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#24928):
> https://lists.yoctoproject.org/g/meta-freescale/message/24928
> Mute This Topic: https://lists.yoctoproject.org/mt/101177560/3619744
> Group Owner: meta-freescale+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [
> b.hutchman@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>
[-- Attachment #1.2: Type: text/html, Size: 5894 bytes --]
[-- Attachment #2: 20230906_123833.jpg --]
[-- Type: image/jpeg, Size: 152200 bytes --]
next prev parent reply other threads:[~2023-09-06 16:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-05 19:21 Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk) Brian Hutchinson
2023-09-05 21:32 ` [meta-freescale] " Daiane Angolini
2023-09-05 23:00 ` Brian Hutchinson
2023-09-06 11:49 ` Daiane Angolini
2023-09-06 12:23 ` Brian Hutchinson
[not found] ` <17824EC1AA68A4AB.2662@lists.yoctoproject.org>
2023-09-06 16:52 ` Brian Hutchinson [this message]
2023-09-13 20:04 ` Daiane Angolini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAFZh4h8A4Z16KHCi34tg7Pa0tDirm0yEg+7XkPMhsZLXj5-p6g@mail.gmail.com \
--to=b.hutchman@gmail.com \
--cc=daiane.angolini@foundries.io \
--cc=meta-freescale@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).