Top posting as I found my problem. Wow, they couldn't have made it any more confusing. Attached is a pic of the dip switch setting that made it boot from SD Card. See attached picture or: Switch - Setting 1 - off 2 - on 3 - off 4 - off I broke down and built the imx93evk from NXP and even that didn't work so started playing with switch settings and found the issue. Regards, Brian On Wed, Sep 6, 2023, 8:23 AM Brian Hutchinson via lists.yoctoproject.org wrote: > On Wed, Sep 6, 2023 at 7:49 AM Daiane Angolini > wrote: > > > > On Tue, Sep 5, 2023 at 8:01 PM Brian Hutchinson > wrote: > > > > > > Hi Daiane, > > > > > > On Tue, Sep 5, 2023 at 5:32 PM Daiane Angolini > > > wrote: > > > > > > > > On Tue, Sep 5, 2023 at 4:21 PM Brian Hutchinson < > b.hutchman@gmail.com> wrote: > > > > > > > > > > Hi, > > > > > > > > > > I recently obtained a imx93 evk board and wanted to build fsl > > > > > community bsp distro for it. > > > > > > > > > > I generated a core-image-base sdcard image using DISTRO=poky > > > > > MACHINE=imx93-11x11-lpddr4x-evk but it doesn't boot ... so sign of > > > > > life on console ... no lights blinking, no u-boot output etc.. > > > > > > > > Do you know which is the imx-boot you are using on your image? Are > you > > > > flashing the sdcard with a .wic? using uuu? > > > > > > Looks like it built u-boot-imx and is version 2022.04-r0 > > > > > > I did a dd of the .wic.gz that core-image-base produced to a sdcard > > > and set the dip switches to 0010 (also tried 1010) to boot from sdcard > > > instead of eMMC. The uncompressed .wic file size was 322611200. > > > > I remember I got confused with the dip switches' orientation. But if > > you have another working image, so your board is properly configured. > > > Which image did you build? I rebuilt core-image-base from master > using DISTRO=fslc-framebuffer and once again got the same result ... > no sign of board booting so I must be missing something or not doing > something right. > > Regards, > > Brian > > > Daiane > > > > > > > > > > > When I tested it, I used DISTRO=fslc-framebuffer. > > > > > > I just rebuilt again from master and got same result. Maybe I'll try > > > same distro you did and see what happens. > > > > > > Thanks, > > > > > > Brian > > > > > > > > > > > The last time I tested it worked fine. > > > > > > > > Daiane > > > > > > > > > > > > > > I just want a minimal distro that supports a serial console (via > the > > > > > USB debug cable) and networking at the moment. On imx8mm-evk I > used > > > > > core-image-base to start work on my own custom OS so thought that > > > > > would be a good starting point with this imx93 board too but not > sure > > > > > meta-freescale fully supports the imx93 evk yet. I built kirkstone > > > > > and it had machine support and everything built ok, but maybe > > > > > something else is missing. > > > > > > > > > > I searched the archives and I don't see any mention of the imx93 > evk yet. > > > > > > > > > > Thanks! > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- > Links: You receive all messages sent to this group. > View/Reply Online (#24928): > https://lists.yoctoproject.org/g/meta-freescale/message/24928 > Mute This Topic: https://lists.yoctoproject.org/mt/101177560/3619744 > Group Owner: meta-freescale+owner@lists.yoctoproject.org > Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [ > b.hutchman@gmail.com] > -=-=-=-=-=-=-=-=-=-=-=- > >