From: Brian Hutchinson <b.hutchman@gmail.com>
To: Daiane Angolini <daiane.angolini@foundries.io>
Cc: meta-freescale@lists.yoctoproject.org
Subject: Re: [meta-freescale] Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk)
Date: Wed, 6 Sep 2023 08:23:09 -0400 [thread overview]
Message-ID: <CAFZh4h9f5z2QFCyqhKWPrBQmFk6o1O3DrFybD1eABzRiuJs=Fg@mail.gmail.com> (raw)
In-Reply-To: <CA+HEL79zZbFDcDWyakBHydzhYxqDQVMAPnV85rH=u3g2ebp+hQ@mail.gmail.com>
On Wed, Sep 6, 2023 at 7:49 AM Daiane Angolini
<daiane.angolini@foundries.io> wrote:
>
> On Tue, Sep 5, 2023 at 8:01 PM Brian Hutchinson <b.hutchman@gmail.com> wrote:
> >
> > Hi Daiane,
> >
> > On Tue, Sep 5, 2023 at 5:32 PM Daiane Angolini
> > <daiane.angolini@foundries.io> wrote:
> > >
> > > On Tue, Sep 5, 2023 at 4:21 PM Brian Hutchinson <b.hutchman@gmail.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I recently obtained a imx93 evk board and wanted to build fsl
> > > > community bsp distro for it.
> > > >
> > > > I generated a core-image-base sdcard image using DISTRO=poky
> > > > MACHINE=imx93-11x11-lpddr4x-evk but it doesn't boot ... so sign of
> > > > life on console ... no lights blinking, no u-boot output etc..
> > >
> > > Do you know which is the imx-boot you are using on your image? Are you
> > > flashing the sdcard with a .wic? using uuu?
> >
> > Looks like it built u-boot-imx and is version 2022.04-r0
> >
> > I did a dd of the .wic.gz that core-image-base produced to a sdcard
> > and set the dip switches to 0010 (also tried 1010) to boot from sdcard
> > instead of eMMC. The uncompressed .wic file size was 322611200.
>
> I remember I got confused with the dip switches' orientation. But if
> you have another working image, so your board is properly configured.
>
Which image did you build? I rebuilt core-image-base from master
using DISTRO=fslc-framebuffer and once again got the same result ...
no sign of board booting so I must be missing something or not doing
something right.
Regards,
Brian
> Daiane
> >
> > >
> > > When I tested it, I used DISTRO=fslc-framebuffer.
> >
> > I just rebuilt again from master and got same result. Maybe I'll try
> > same distro you did and see what happens.
> >
> > Thanks,
> >
> > Brian
> >
> > >
> > > The last time I tested it worked fine.
> > >
> > > Daiane
> > >
> > > >
> > > > I just want a minimal distro that supports a serial console (via the
> > > > USB debug cable) and networking at the moment. On imx8mm-evk I used
> > > > core-image-base to start work on my own custom OS so thought that
> > > > would be a good starting point with this imx93 board too but not sure
> > > > meta-freescale fully supports the imx93 evk yet. I built kirkstone
> > > > and it had machine support and everything built ok, but maybe
> > > > something else is missing.
> > > >
> > > > I searched the archives and I don't see any mention of the imx93 evk yet.
> > > >
> > > > Thanks!
> > > >
> > > > Brian
> > > >
> > > > -=-=-=-=-=-=-=-=-=-=-=-
> > > > Links: You receive all messages sent to this group.
> > > > View/Reply Online (#24924): https://lists.yoctoproject.org/g/meta-freescale/message/24924
> > > > Mute This Topic: https://lists.yoctoproject.org/mt/101177560/5992125
> > > > Group Owner: meta-freescale+owner@lists.yoctoproject.org
> > > > Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [daiane.angolini@foundries.io]
> > > > -=-=-=-=-=-=-=-=-=-=-=-
> > > >
next prev parent reply other threads:[~2023-09-06 12:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-05 19:21 Anyone doing meta-freescale builds for imx93 evk yet? (imx93-11x11-lpddr4x-evk) Brian Hutchinson
2023-09-05 21:32 ` [meta-freescale] " Daiane Angolini
2023-09-05 23:00 ` Brian Hutchinson
2023-09-06 11:49 ` Daiane Angolini
2023-09-06 12:23 ` Brian Hutchinson [this message]
[not found] ` <17824EC1AA68A4AB.2662@lists.yoctoproject.org>
2023-09-06 16:52 ` Brian Hutchinson
2023-09-13 20:04 ` Daiane Angolini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFZh4h9f5z2QFCyqhKWPrBQmFk6o1O3DrFybD1eABzRiuJs=Fg@mail.gmail.com' \
--to=b.hutchman@gmail.com \
--cc=daiane.angolini@foundries.io \
--cc=meta-freescale@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).