From: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
To: <joel@jms.id.au>, <andrew@aj.id.au>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<openbmc@lists.ozlabs.org>, <robh+dt@kernel.org>
Cc: supreeth.venkatesh@amd.com
Subject: [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform
Date: Fri, 1 Mar 2024 16:22:57 -0600 [thread overview]
Message-ID: <20240301222257.3309541-1-supreeth.venkatesh@amd.com> (raw)
Add initial device tree and makefile updates for
AMD Onyx platform.
AMD Onyx platform is an AMD customer reference board with an Aspeed
ast2600 BMC manufactured by AMD.
It describes I2C devices, UARTs, MAC, FMC, etc.
present on AMD Onyx platform.
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
---
Changes since v1:
* Incorporate review comments
* Update commit message
* Remove vmalloc and earlyprintk
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../boot/dts/aspeed/aspeed-bmc-amd-onyx.dts | 94 +++++++++++++++++++
2 files changed, 95 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index fb9cc95f1b60..2b27d377aae2 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-daytonax.dtb \
aspeed-bmc-amd-ethanolx.dtb \
+ aspeed-bmc-amd-onyx.dtb \
aspeed-bmc-ampere-mtjade.dtb \
aspeed-bmc-ampere-mtmitchell.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
new file mode 100644
index 000000000000..1831b8d18db2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 - 2024 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AMD Onyx BMC";
+ compatible = "amd,onyx-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+};
+
+&mdio0 {
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ status = "okay";
+ #include "openbmc-flash-layout-128.dtsi"
+ };
+};
+
+//Host Console
+&uart1 {
+ status = "okay";
+};
+
+//BMC Console
+&uart5 {
+ status = "okay";
+};
+
+&gpio0 {
+gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","MON_POST_COMPLETE","P0_PRESENT_L","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","ASSERT_WARM_RST_BTN_L","ASSERT_SOC_RST_BTN_L","","","","","",
+ /*I0-I7*/ "","","","","","","","P0_I3C_APML_ALERT_L",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","PSP_SOFT_FUSE_NOTIFY","ASSERT_BMC_READY",
+ /*O0-O7*/ "","","HDT_SEL","HDT_XTRIG5","HDT_XTRIG6","JTAG_TRST_N","","",
+ /*P0-P7*/ "MON_RST_BTN_L","ASSERT_RST_BTN_L","MON_PWR_BTN_L","ASSERT_PWR_BTN_L","HPM_FPGA_LOCKOUT","ASSERT_NMI_BTN_L","MON_PWR_GOOD","",
+ /*Q0-Q7*/ "","","HDT_DBREQ_L","","BIOS_SPD_MUX_CTRL_RELEASED_L","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","P0_DIMM_AF_ERROR","P0_DIMM_GL_ERROR",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
--
2.34.1
next reply other threads:[~2024-03-01 22:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 22:22 Supreeth Venkatesh [this message]
2024-03-01 22:36 ` [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301222257.3309541-1-supreeth.venkatesh@amd.com \
--to=supreeth.venkatesh@amd.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).