From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3 11/11] media: max9286: Use frame interval from subdev state
Date: Thu, 9 May 2024 18:14:01 +0200 [thread overview]
Message-ID: <20240509161403.111789-12-jacopo.mondi@ideasonboard.com> (raw)
In-Reply-To: <20240509161403.111789-1-jacopo.mondi@ideasonboard.com>
Use the frame interval stored in the subdev state instead of storing
a copy in the driver private structure.
Initialize the frame interval to the special case 0/0 that in the
max9286 driver represents automatic handling of frame sync.
As the frame sync mode is set at s_stream() time, we can remove it
from max9286_setup().
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/media/i2c/max9286.c | 52 +++++++++++++++++--------------------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 8c75756c945c..322c557fdb66 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -197,8 +197,6 @@ struct max9286_priv {
struct v4l2_ctrl *pixelrate_ctrl;
unsigned int pixelrate;
- struct v4l2_fract interval;
-
unsigned int nsources;
unsigned int source_mask;
unsigned int route_mask;
@@ -571,11 +569,14 @@ static void max9286_set_video_format(struct max9286_priv *priv,
MAX9286_INVVS | MAX9286_HVSRC_D14);
}
-static void max9286_set_fsync_period(struct max9286_priv *priv)
+static void max9286_set_fsync_period(struct max9286_priv *priv,
+ struct v4l2_subdev_state *state)
{
+ const struct v4l2_fract *interval;
u32 fsync;
- if (!priv->interval.numerator || !priv->interval.denominator) {
+ interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
+ if (!interval->numerator || !interval->denominator) {
/*
* Special case, a null interval enables automatic FRAMESYNC
* mode. FRAMESYNC is taken from the slowest link.
@@ -591,8 +592,8 @@ static void max9286_set_fsync_period(struct max9286_priv *priv)
* The FRAMESYNC generator is configured with a period expressed as a
* number of PCLK periods.
*/
- fsync = div_u64((u64)priv->pixelrate * priv->interval.numerator,
- priv->interval.denominator);
+ fsync = div_u64((u64)priv->pixelrate * interval->numerator,
+ interval->denominator);
dev_dbg(&priv->client->dev, "fsync period %u (pclk %u)\n", fsync,
priv->pixelrate);
@@ -801,7 +802,7 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
format = v4l2_subdev_state_get_format(state, MAX9286_SRC_PAD);
max9286_set_video_format(priv, format);
- max9286_set_fsync_period(priv);
+ max9286_set_fsync_period(priv, state);
/*
* The frame sync between cameras is transmitted across the
@@ -874,19 +875,11 @@ static int max9286_get_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_interval *interval)
{
- struct max9286_priv *priv = sd_to_max9286(sd);
-
- /*
- * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
- * subdev active state API.
- */
- if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
if (interval->pad != MAX9286_SRC_PAD)
return -EINVAL;
- interval->interval = priv->interval;
+ interval->interval = *v4l2_subdev_state_get_interval(sd_state,
+ interval->pad);
return 0;
}
@@ -895,19 +888,11 @@ static int max9286_set_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_interval *interval)
{
- struct max9286_priv *priv = sd_to_max9286(sd);
-
- /*
- * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
- * subdev active state API.
- */
- if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
if (interval->pad != MAX9286_SRC_PAD)
return -EINVAL;
- priv->interval = interval->interval;
+ *v4l2_subdev_state_get_interval(sd_state,
+ interval->pad) = interval->interval;
return 0;
}
@@ -993,9 +978,21 @@ static const struct v4l2_mbus_framefmt max9286_default_format = {
static int max9286_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state)
{
+ struct v4l2_fract *interval;
+
for (unsigned int i = 0; i < MAX9286_N_PADS; i++)
*v4l2_subdev_state_get_format(state, i) = max9286_default_format;
+ /*
+ * Special case: a null interval enables automatic FRAMESYNC mode.
+ *
+ * FRAMESYNC is taken from the slowest link. See register 0x01
+ * configuration.
+ */
+ interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
+ interval->numerator = 0;
+ interval->denominator = 0;
+
return 0;
}
@@ -1142,7 +1139,6 @@ static int max9286_setup(struct max9286_priv *priv)
max9286_write(priv, 0x69, (0xf & ~priv->route_mask));
max9286_set_video_format(priv, &max9286_default_format);
- max9286_set_fsync_period(priv);
cfg = max9286_read(priv, 0x1c);
if (cfg < 0)
--
2.44.0
next prev parent reply other threads:[~2024-05-09 16:14 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-09 16:13 [PATCH v3 00/11] media: renesas: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 16:13 ` [PATCH v3 01/11] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-09 22:34 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 02/11] media: rcar-csi2: Disable runtime_pm in probe error Jacopo Mondi
2024-05-09 22:35 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 03/11] media: rcar-csi2: Cleanup subdevice in remove() Jacopo Mondi
2024-05-09 22:35 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 04/11] media: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 22:40 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 05/11] media: adv748x-csi2: Implement enum_mbus_codes Jacopo Mondi
2024-05-09 20:44 ` Laurent Pinchart
2024-05-09 22:43 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 06/11] media: adv748x-csi2: Validate the image format Jacopo Mondi
2024-05-09 22:42 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 07/11] media: adv748x-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 22:45 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 08/11] media: adv748x-afe: Use 1X16 media bus code Jacopo Mondi
2024-05-09 21:45 ` Niklas Söderlund
2024-05-09 16:13 ` [PATCH v3 09/11] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-09 16:14 ` [PATCH v3 10/11] media: max9286: Use the subdev active state Jacopo Mondi
2024-05-09 20:46 ` Laurent Pinchart
2024-05-09 16:14 ` Jacopo Mondi [this message]
2024-05-09 20:51 ` [PATCH v3 00/11] media: renesas: rcar-csi2: " Laurent Pinchart
2024-05-09 22:48 ` Niklas Söderlund
2024-05-09 23:06 ` Laurent Pinchart
2024-05-10 8:36 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240509161403.111789-12-jacopo.mondi@ideasonboard.com \
--to=jacopo.mondi@ideasonboard.com \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).