From: Sylvain Petinot <sylvain.petinot@foss.st.com>
To: <benjamin.mugnier@foss.st.com>, <sylvain.petinot@foss.st.com>,
<mchehab@kernel.org>, <robh@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>
Cc: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] media: dt-bindings: Add ST VD56G3 camera sensor binding
Date: Wed, 17 Apr 2024 15:34:52 +0200 [thread overview]
Message-ID: <20240417133453.17406-2-sylvain.petinot@foss.st.com> (raw)
In-Reply-To: <20240417133453.17406-1-sylvain.petinot@foss.st.com>
Add devicetree bindings Documentation for ST VD56G3 & ST VD66GY camera
sensors. Update MAINTAINERS file.
Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com>
---
.../bindings/media/i2c/st,st-vd56g3.yaml | 143 ++++++++++++++++++
MAINTAINERS | 9 ++
2 files changed, 152 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
new file mode 100644
index 000000000000..6792c02fea5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vd56g3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD56G3 Global Shutter Image Sensor
+
+maintainers:
+ - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+ - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
+ with an active array size of 1124 x 1364 (portrait orientation).
+ It is programmable through I2C, the address is fixed to 0x10.
+ The sensor output is available via CSI-2, which is configured as either 1 or
+ 2 data lanes.
+ The sensor provides 8 GPIOS that can be used for either
+ - frame synchronization (Master: out-sync or Slave: in-sync)
+ - external LED signal (synchronized with sensor integration periods)
+
+properties:
+ compatible:
+ enum:
+ - st,st-vd56g3
+ - st,st-vd66gy
+ description:
+ Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
+ is a colour variant.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VCORE-supply:
+ description: Digital core power supply (1.15V)
+
+ VDDIO-supply:
+ description: Digital IO power supply (1.8V)
+
+ VANA-supply:
+ description: Analog power supply (2.8V)
+
+ reset-gpios:
+ description: Sensor reset active low GPIO (XSHUTDOWN)
+ maxItems: 1
+
+ st,leds:
+ description:
+ Sensor's GPIOs used for external LED control.
+ Signal being the enveloppe of the integration time.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ const: 0
+
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [1, 2]
+
+ link-frequencies:
+ minItems: 1
+ maxItems: 1
+ items:
+ enum: [402000000, 750000000]
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 3
+ items:
+ enum: [0, 1]
+ description: Any lane can be inverted or not.
+
+ required:
+ - clock-lanes
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - VCORE-supply
+ - VDDIO-supply
+ - VANA-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vd56g3: camera-sensor@10 {
+ compatible = "st,st-vd56g3";
+ reg = <0x10>;
+
+ clocks = <&camera_clk_12M>;
+
+ VCORE-supply = <&camera_vcore_v1v15>;
+ VDDIO-supply = <&camera_vddio_v1v8>;
+ VANA-supply = <&camera_vana_v2v8>;
+
+ reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ st,leds = <6>;
+
+ port {
+ vd56g3_ep: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ link-frequencies =
+ /bits/ 64 <402000000>;
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 7c121493f43d..991e65627e18 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20868,6 +20868,15 @@ S: Maintained
F: Documentation/hwmon/stpddc60.rst
F: drivers/hwmon/pmbus/stpddc60.c
+ST VD56G3 DRIVER
+M: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M: Sylvain Petinot <sylvain.petinot@foss.st.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/st,st-vd56g3.yaml
+F: drivers/media/i2c/st-vd56g3.c
+
ST VGXY61 DRIVER
M: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
M: Sylvain Petinot <sylvain.petinot@foss.st.com>
--
2.17.1
next prev parent reply other threads:[~2024-04-17 13:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-17 13:34 [PATCH 0/2] media: Add driver for ST VD56G3 camera sensor Sylvain Petinot
2024-04-17 13:34 ` Sylvain Petinot [this message]
2024-04-18 13:09 ` [PATCH 1/2] media: dt-bindings: Add ST VD56G3 camera sensor binding Rob Herring
2024-05-03 8:25 ` Sylvain Petinot
2024-05-03 16:06 ` Krzysztof Kozlowski
2024-05-27 19:05 ` Krzysztof Kozlowski
2024-04-24 20:46 ` Sakari Ailus
2024-05-03 8:40 ` Sylvain Petinot
2024-04-17 13:34 ` [PATCH 2/2] media: i2c: Add driver for ST VD56G3 camera sensor Sylvain Petinot
2024-04-18 5:39 ` kernel test robot
2024-04-18 9:17 ` Tommaso Merciai
2024-05-03 7:54 ` Sylvain Petinot
2024-05-06 8:23 ` Tommaso Merciai
2024-04-24 21:12 ` Sakari Ailus
2024-05-03 10:10 ` Sylvain Petinot
2024-05-13 13:37 ` Benjamin Mugnier
2024-05-27 7:31 ` Sakari Ailus
2024-05-27 7:44 ` Benjamin Mugnier
2024-05-27 7:45 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240417133453.17406-2-sylvain.petinot@foss.st.com \
--to=sylvain.petinot@foss.st.com \
--cc=benjamin.mugnier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).