From: Tengfei Fan <quic_tengfan@quicinc.com>
To: <andersson@kernel.org>, <konrad.dybcio@linaro.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <kernel@quicinc.com>,
Tengfei Fan <quic_tengfan@quicinc.com>
Subject: [PATCH] arm64: dts: qcom: sm8550: Move some common usb node settings to SoC dtsi
Date: Mon, 13 May 2024 16:47:01 +0800 [thread overview]
Message-ID: <20240513084701.1658826-1-quic_tengfan@quicinc.com> (raw)
All the board dts which base on SM8550 SoC dtsi refer to usb_1_dwc3_ss,
usb_dp_qmpphy_usb_ss_in, orientation-switch and usb-role-switch, so move
them to SoC dtsi from board dts.
OTG is default for dr_mode, so it can be dropped from board dts.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 15 ---------------
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 15 ---------------
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 15 ---------------
.../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 14 --------------
arch/arm64/boot/dts/qcom/sm8550.dtsi | 4 ++++
5 files changed, 4 insertions(+), 59 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 12d60a0ee095..e6bfd3ce2bed 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -1258,19 +1258,10 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
-};
-
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
&usb_1_hsphy {
vdd-supply = <&vreg_l1e_0p88>;
vdda12-supply = <&vreg_l3e_1p2>;
@@ -1284,8 +1275,6 @@ &usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3f_0p88>;
- orientation-switch;
-
status = "okay";
};
@@ -1297,10 +1286,6 @@ &usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
-&usb_dp_qmpphy_usb_ss_in {
- remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
&xo_board {
clock-frequency = <76800000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 3d4ad5aac70f..fbcdf66f16d6 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -951,19 +951,10 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
-};
-
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
&usb_1_hsphy {
vdd-supply = <&vreg_l1e_0p88>;
vdda12-supply = <&vreg_l3e_1p2>;
@@ -977,8 +968,6 @@ &usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3f_0p91>;
- orientation-switch;
-
status = "okay";
};
@@ -990,10 +979,6 @@ &usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
-&usb_dp_qmpphy_usb_ss_in {
- remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
&xo_board {
clock-frequency = <76800000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 92f015017418..3ad616e46cb3 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -1135,19 +1135,10 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
-};
-
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
&usb_1_hsphy {
vdd-supply = <&vreg_l1e_0p88>;
vdda12-supply = <&vreg_l3e_1p2>;
@@ -1161,8 +1152,6 @@ &usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3f_0p88>;
- orientation-switch;
-
status = "okay";
};
@@ -1174,10 +1163,6 @@ &usb_dp_qmpphy_out {
remote-endpoint = <&redriver_ss_in>;
};
-&usb_dp_qmpphy_usb_ss_in {
- remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
&xo_board {
clock-frequency = <76800000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index 85e0d3d66e16..85d487ef80a0 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -737,19 +737,10 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
-};
-
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
-&usb_1_dwc3_ss {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
&usb_1_hsphy {
vdd-supply = <&pm8550vs_2_l1>;
vdda12-supply = <&pm8550vs_2_l3>;
@@ -761,7 +752,6 @@ &usb_1_hsphy {
&usb_dp_qmpphy {
vdda-phy-supply = <&pm8550vs_2_l3>;
vdda-pll-supply = <&pm8550ve_l3>;
- orientation-switch;
status = "okay";
};
@@ -770,10 +760,6 @@ &usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
-&usb_dp_qmpphy_usb_ss_in {
- remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
&xo_board {
clock-frequency = <76800000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index bc5aeb05ffc3..05f7d7341f72 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -3168,6 +3168,7 @@ usb_dp_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
status = "disabled";
@@ -3186,6 +3187,7 @@ port@1 {
reg = <1>;
usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
};
@@ -3264,6 +3266,7 @@ usb_1_dwc3: usb@a600000 {
snps,has-lpm-erratum;
tx-fifo-resize;
dma-coherent;
+ usb-role-switch;
ports {
#address-cells = <1>;
@@ -3280,6 +3283,7 @@ port@1 {
reg = <1>;
usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
base-commit: 6ba6c795dc73c22ce2c86006f17c4aa802db2a60
--
2.25.1
next reply other threads:[~2024-05-13 8:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-13 8:47 Tengfei Fan [this message]
2024-05-13 8:56 ` [PATCH] arm64: dts: qcom: sm8550: Move some common usb node settings to SoC dtsi Krzysztof Kozlowski
2024-05-14 0:52 ` Tengfei Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240513084701.1658826-1-quic_tengfan@quicinc.com \
--to=quic_tengfan@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).