From: "Jouni Högander" <jouni.hogander@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: animesh.manna@intel.com, "Jouni Högander" <jouni.hogander@intel.com>
Subject: [PATCH v10 00/12] Panel replay selective update support
Date: Fri, 10 May 2024 12:38:11 +0300 [thread overview]
Message-ID: <20240510093823.3146455-1-jouni.hogander@intel.com> (raw)
This patch set is implementing panel replay selective update support
for Intel hardware.
v10:
- use always PSR2_STATUS for eDP Panel Replay
- handle SRD_STATUS vs. PSR2_STATUS in intel_psr_wait_exit_locked as well
v9:
- do not add has_psr check into psr2 case in intel_dp_compute_vsc_sdp
- use drm_dp_dpcd_readb instead of drm_dp_dpcd_read in intel_dp_get_su_capability
- ensure intel_dp_get_su_capability returns 0 if drm_dp_dpcd_readb fails
v8:
- use correct offset for DP_PANEL_PANEL_REPLAY_CAPABILITY
v7:
- use always vsc revision 0x6 for Panel Replay
v6:
- fixes split to separate patch set
v5:
- do not use PSR2_STATUS for PSR1
v4:
- do not rename intel_psr_enabled
- do not add sel_update_et_enabled into struct intel_psr
v3:
- do not disable panel replay by default
- set has_psr for panel replay as well
- enable sink before link training
- do not apply all PSR workarounds for panel replay
- do not write/read registers/bits not applicable for panel replay
- use psr bit definitions in granularity configuration as well
- goto unsupported instead of return when global enabled check fails
- update module parameter descriptions.
v2:
- make psr pause/resume to work for panel replay as well
Jouni Högander (12):
drm/i915/psr: Rename has_psr2 as has_sel_update
drm/i915/display: Do not print "psr: enabled" for on Panel Replay
drm/i915/dp: Use always vsc revision 0x6 for Panel Replay
drm/i915/psr: Rename psr2_enabled as sel_update_enabled
drm/panelreplay: dpcd register definition for panelreplay SU
drm/i915/psr: Detect panel replay selective update support
drm/i915/psr: Modify intel_dp_get_su_granularity to support panel
replay
drm/i915/psr: Panel replay uses SRD_STATUS to track it's status
drm/i915/psr: Do not apply workarounds in case of panel replay
drm/i915/psr: Update PSR module parameter descriptions
drm/i915/psr: Split intel_psr2_config_valid for panel replay
drm/i915/psr: Add panel replay sel update support to debugfs interface
.../drm/i915/display/intel_crtc_state_dump.c | 7 +-
drivers/gpu/drm/i915/display/intel_display.c | 2 +-
.../drm/i915/display/intel_display_params.c | 5 +-
.../drm/i915/display/intel_display_types.h | 5 +-
drivers/gpu/drm/i915/display/intel_dp.c | 17 +-
drivers/gpu/drm/i915/display/intel_fbc.c | 5 +-
drivers/gpu/drm/i915/display/intel_hdmi.c | 3 +-
drivers/gpu/drm/i915/display/intel_psr.c | 237 ++++++++++++------
include/drm/display/drm_dp.h | 6 +
9 files changed, 194 insertions(+), 93 deletions(-)
--
2.34.1
next reply other threads:[~2024-05-10 9:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 9:38 Jouni Högander [this message]
2024-05-10 9:38 ` [PATCH v10 01/12] drm/i915/psr: Rename has_psr2 as has_sel_update Jouni Högander
2024-05-10 9:38 ` [PATCH v10 02/12] drm/i915/display: Do not print "psr: enabled" for on Panel Replay Jouni Högander
2024-05-10 9:38 ` [PATCH v10 03/12] drm/i915/dp: Use always vsc revision 0x6 for " Jouni Högander
2024-05-10 9:38 ` [PATCH v10 04/12] drm/i915/psr: Rename psr2_enabled as sel_update_enabled Jouni Högander
2024-05-10 9:38 ` [PATCH v10 05/12] drm/panelreplay: dpcd register definition for panelreplay SU Jouni Högander
2024-05-10 9:45 ` Jani Nikula
2024-05-10 10:27 ` Hogander, Jouni
2024-05-10 9:38 ` [PATCH v10 06/12] drm/i915/psr: Detect panel replay selective update support Jouni Högander
2024-05-10 9:38 ` [PATCH v10 07/12] drm/i915/psr: Modify intel_dp_get_su_granularity to support panel replay Jouni Högander
2024-05-10 9:38 ` [PATCH v10 08/12] drm/i915/psr: Panel replay uses SRD_STATUS to track it's status Jouni Högander
2024-05-10 10:59 ` Manna, Animesh
2024-05-10 9:38 ` [PATCH v10 09/12] drm/i915/psr: Do not apply workarounds in case of panel replay Jouni Högander
2024-05-10 9:38 ` [PATCH v10 10/12] drm/i915/psr: Update PSR module parameter descriptions Jouni Högander
2024-05-10 9:38 ` [PATCH v10 11/12] drm/i915/psr: Split intel_psr2_config_valid for panel replay Jouni Högander
2024-05-10 9:38 ` [PATCH v10 12/12] drm/i915/psr: Add panel replay sel update support to debugfs interface Jouni Högander
2024-05-10 11:35 ` ✗ Fi.CI.CHECKPATCH: warning for Panel replay selective update support (rev11) Patchwork
2024-05-10 11:35 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-05-10 11:42 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-11 2:00 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-05-13 5:17 ` Hogander, Jouni
2024-05-15 8:29 ` [PATCH v10 00/12] Panel replay selective update support Hogander, Jouni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510093823.3146455-1-jouni.hogander@intel.com \
--to=jouni.hogander@intel.com \
--cc=animesh.manna@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).