dri-devel Archive mirror
 help / color / mirror / Atom feed
From: Animesh Manna <animesh.manna@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org, jani.nikula@intel.com,
	jouni.hogander@intel.com, arun.r.murthy@intel.com,
	Animesh Manna <animesh.manna@intel.com>
Subject: [PATCH v4 5/6] drm/i915/alpm: Enable lobf from source in ALPM_CTL
Date: Thu,  9 May 2024 11:01:54 +0530	[thread overview]
Message-ID: <20240509053155.327071-6-animesh.manna@intel.com> (raw)
In-Reply-To: <20240509053155.327071-1-animesh.manna@intel.com>

Set the Link Off Between Frames Enable bit in ALPM_CTL register.

Note: Lobf need to be enabled adaptive sync fixed refresh mode
where vmin = vmax = flipline, which will arise after cmmr feature
enablement. Will add enabling sequence in a separate patch.

v1: Initial version.
v2: Condition check modified in alpm_configure(). [Jouni]

Signed-off-by: Animesh Manna <animesh.manna@intel.com>
---
 drivers/gpu/drm/i915/display/intel_alpm.c | 16 +++++++++++-----
 drivers/gpu/drm/i915/display/intel_alpm.h |  4 ++--
 drivers/gpu/drm/i915/display/intel_psr.c  |  2 +-
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
index 5979eab1f2e0..c8eddc910cc5 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.c
+++ b/drivers/gpu/drm/i915/display/intel_alpm.c
@@ -300,10 +300,11 @@ void intel_alpm_compute_lobf_config(struct intel_dp *intel_dp,
 		(first_sdp_position + waketime_in_lines);
 }
 
-static void lnl_alpm_configure(struct intel_dp *intel_dp)
+static void lnl_alpm_configure(struct intel_dp *intel_dp,
+			       const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 	u32 alpm_ctl;
 
 	if (DISPLAY_VER(dev_priv) < 20 || (!intel_dp->psr.psr2_enabled &&
@@ -314,7 +315,8 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp)
 	 * Panel Replay on eDP is always using ALPM aux less. I.e. no need to
 	 * check panel support at this point.
 	 */
-	if (intel_dp->psr.panel_replay_enabled && intel_dp_is_edp(intel_dp)) {
+	if ((intel_dp->psr.panel_replay_enabled && intel_dp_is_edp(intel_dp)) ||
+	    (crtc_state->has_lobf && intel_dp->alpm_parameters.mode == ALPM_AUX_LESS)) {
 		alpm_ctl = ALPM_CTL_ALPM_ENABLE |
 			ALPM_CTL_ALPM_AUX_LESS_ENABLE |
 			ALPM_CTL_AUX_LESS_SLEEP_HOLD_TIME_50_SYMBOLS;
@@ -339,12 +341,16 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp)
 			   ALPM_CTL_EXTENDED_FAST_WAKE_TIME(intel_dp->alpm_parameters.fast_wake_lines);
 	}
 
+	if (crtc_state->has_lobf)
+		alpm_ctl |= ALPM_CTL_LOBF_ENABLE;
+
 	alpm_ctl |= ALPM_CTL_ALPM_ENTRY_CHECK(intel_dp->alpm_parameters.check_entry_lines);
 
 	intel_de_write(dev_priv, ALPM_CTL(dev_priv, cpu_transcoder), alpm_ctl);
 }
 
-void intel_alpm_configure(struct intel_dp *intel_dp)
+void intel_alpm_configure(struct intel_dp *intel_dp,
+			  const struct intel_crtc_state *crtc_state)
 {
-	lnl_alpm_configure(intel_dp);
+	lnl_alpm_configure(intel_dp, crtc_state);
 }
diff --git a/drivers/gpu/drm/i915/display/intel_alpm.h b/drivers/gpu/drm/i915/display/intel_alpm.h
index 80c8a66b34af..c0c085c1e5b0 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.h
+++ b/drivers/gpu/drm/i915/display/intel_alpm.h
@@ -18,6 +18,6 @@ bool intel_alpm_compute_params(struct intel_dp *intel_dp,
 void intel_alpm_compute_lobf_config(struct intel_dp *intel_dp,
 				    struct intel_crtc_state *crtc_state,
 				    struct drm_connector_state *conn_state);
-void intel_alpm_configure(struct intel_dp *intel_dp);
-
+void intel_alpm_configure(struct intel_dp *intel_dp,
+			  const struct intel_crtc_state *crtc_state);
 #endif
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 9e89844e6418..cd1afc82aefc 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -1620,7 +1620,7 @@ static void intel_psr_enable_source(struct intel_dp *intel_dp,
 			     IGNORE_PSR2_HW_TRACKING : 0);
 
 	if (intel_dp_is_edp(intel_dp))
-		intel_alpm_configure(intel_dp);
+		intel_alpm_configure(intel_dp, crtc_state);
 
 	/*
 	 * Wa_16013835468
-- 
2.29.0


  parent reply	other threads:[~2024-05-09  5:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-09  5:31 [PATCH v4 0/6] Link off between frames for edp Animesh Manna
2024-05-09  5:31 ` [PATCH v4 1/6] drm/i915/alpm: Move alpm parameters from intel_psr Animesh Manna
2024-05-09  5:31 ` [PATCH v4 2/6] drm/i915/alpm: Move alpm related code to a new file Animesh Manna
2024-05-09  5:31 ` [PATCH v4 3/6] drm/display: Add missing aux less alpm wake related bits Animesh Manna
2024-05-09  5:31 ` [PATCH v4 4/6] drm/i915/alpm: Add compute config for lobf Animesh Manna
2024-05-13  7:31   ` Hogander, Jouni
2024-05-13 11:22     ` Manna, Animesh
2024-05-09  5:31 ` Animesh Manna [this message]
2024-05-09  5:31 ` [PATCH v4 6/6] drm/i915/alpm: Add debugfs for LOBF Animesh Manna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240509053155.327071-6-animesh.manna@intel.com \
    --to=animesh.manna@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=jouni.hogander@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).