* Re: [BUG] tc358743: division by zero
2021-06-09 15:08 ` Ing. Josua Mayer
@ 2021-06-09 17:08 ` Ing. Josua Mayer
2021-06-09 17:27 ` Dave Stevenson
0 siblings, 1 reply; 7+ messages in thread
From: Ing. Josua Mayer @ 2021-06-09 17:08 UTC (permalink / raw)
To: matrandg, mchehab; +Cc: linux-media
[-- Attachment #1: Type: text/plain, Size: 6940 bytes --]
Hello again,
I added debug prints to tc358743_probe_of and
tc358743_num_csi_lanes_needed, tracking the values of pll_prd and pll_fbd.
I believe the bug is caused by probe returning early when it encounters
an unsupported datarate of more than 1gbps per lane, which skips the
code that would initialize pll_fbd.
Hence later in tc358743_num_csi_lanes_needed, pll_fbd is zero - leading
to divide by zero.
The interesting parts of dmesg leading to this conclusion:
[ 16.393072] imx6_mipi_csi2: module is from the staging directory, the
quality is unknown, you have been warned.
[ 16.891557] tc358743 0-000f: initialized pll_prd = 4
[ 16.896618] tc358743 0-000f: unsupported bps per lane: 1188000000 bps
# pll_prd has been initialized, but pll_fbd has not
[ 17.203559] tc358743 0-000f: pll_prd = 4
[ 17.207588] tc358743 0-000f: pll_fbd = 0
# using pll_fbd value 0
[ 17.211539] Division by zero in kernel.
[ 17.215415] CPU: 1 PID: 208 Comm: systemd-udevd Tainted: G WC
E 5.10.0-7-armmp #1 Debian 5.10.40-2
[ 17.225418] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 17.231947] Backtrace:
[ 17.234417] [<c0cf1fe8>] (dump_backtrace) from [<c0cf2394>]
(show_stack+0x20/0x24)
[ 17.247662] [<c0cf2374>] (show_stack) from [<c0cf74c4>]
(dump_stack+0xc8/0xdc)
[ 17.254892] [<c0cf73fc>] (dump_stack) from [<c0cf216c>]
(__div0+0x24/0x28)
[ 17.267442] [<c0cf2148>] (__div0) from [<c07b1254>] (Ldiv0+0x8/0x10)
[ 17.273844] [<bf4cea34>] (tc358743_num_csi_lanes_needed [tc358743])
from [<bf4cec3c>] (tc358743_set_csi+0x1c/0x2f8 [tc358743])
[ 17.290929] [<bf4cec20>] (tc358743_set_csi [tc358743]) from
[<bf4ccaac>] (tc358743_s_dv_timings+0x104/0x1a8 [tc358743])
[ 17.307430] [<bf4cc9a8>] (tc358743_s_dv_timings [tc358743]) from
[<bf4ce384>] (tc358743_probe+0x93c/0xfec [tc358743])
[ 17.323757] [<bf4cda48>] (tc358743_probe [tc358743]) from
[<c0a3ace4>] (i2c_device_probe+0x100/0x2e0)
I don't really know where this condition should be checked for, or
avoided. Hopefully though this gives somebody else enough information to
find a solution.
Yours sincerely
Josua Mayer
Am 09.06.21 um 17:08 schrieb Ing. Josua Mayer:
> and I forgot about the promised dts :( .. I am realyl sorry for spamming
> your mailbox like this ...
>
> Am 09.06.21 um 17:07 schrieb Ing. Josua Mayer:
>> Dear Maintainers,
>>
>> During my attempts at capturing HDMI via the csi-2 port on i.MX6
>> HummingBoard, I triggered a division by zero in
>> tc358743_num_csi_lanes_needed!
>> I am running Debian testing, with linux 5.10.40 - built from debian
>> sources with the tc358743 driver enabled:
>> Linux sr-imx6 5.10.0-7-armmp #1 SMP Debian 5.10.40-2 (2021-05-29)
>> armv7l GNU/Linux
>>
>> The crash is triggered from userspace as I execute:
>> media-ctl -l "'tc358743 0-000f':0->'imx6-mipi-csi2':0[1]"
>> media-ctl -l "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]"
>> media-ctl -l "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]"
>> media-ctl -l "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]"
>> v4l2-ctl -d /dev/v4l-subdev7 --set-edid=file=tc358743-edid.hex && sleep 1
>> v4l2-ctl -d /dev/v4l-subdev7 --set-dv-bt-timings query && sleep 1
>>
>> [ 60.985439] Division by zero in kernel.
>> [ 60.989333] CPU: 1 PID: 395 Comm: v4l2-ctl Tainted: G WC E
>> 5.10.0-7-armmp #1 Debian 5.10.40-2
>> [ 60.998904] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
>> [ 61.005438] Backtrace:
>> [ 61.007911] [<c0cf1fe8>] (dump_backtrace) from [<c0cf2394>]
>> (show_stack+0x20/0x24)
>> [ 61.015489] r7:00000018 r6:600b0013 r5:00000000 r4:c14cdc90
>> [ 61.021162] [<c0cf2374>] (show_stack) from [<c0cf74c4>]
>> (dump_stack+0xc8/0xdc)
>> [ 61.028394] [<c0cf73fc>] (dump_stack) from [<c0cf216c>]
>> (__div0+0x24/0x28)
>> [ 61.035276] r7:00000018 r6:034bc000 r5:c1f67890 r4:4f1a0000
>> [ 61.040951] [<c0cf2148>] (__div0) from [<c07b1254>] (Ldiv0+0x8/0x10)
>> [ 61.047336] [<bf412000>] (tc358743_num_csi_lanes_needed [tc358743])
>> from [<bf412a44>] (tc358743_set_csi+0x1c/0x3f0 [tc358743])
>> [ 61.058734] r9:00000000 r8:c2b8b400 r7:c1f67a59 r6:bf419380
>> r5:c1f679e8 r4:c1f67890
>> [ 61.066495] [<bf412a28>] (tc358743_set_csi [tc358743]) from
>> [<bf413f64>] (tc358743_s_dv_timings+0x104/0x1a8 [tc358743])
>> [ 61.077283] r7:c1f67a59 r6:bf419380 r5:c1f679e8 r4:c1f67890
>> [ 61.082961] [<bf413e60>] (tc358743_s_dv_timings [tc358743]) from
>> [<c0a79fd4>] (subdev_do_ioctl+0x430/0xd0c)
>> [ 61.092708] r7:c1f67890 r6:c2ea0780 r5:c2d91c00 r4:c0845657
>> [ 61.098376] [<c0a79ba4>] (subdev_do_ioctl) from [<c0a7a934>]
>> (subdev_do_ioctl_lock+0x84/0xb4)
>> [ 61.106909] r10:c2d91c00 r9:bea08dec r8:c0845657 r7:00000000
>> r6:c2d91c00 r5:c2ea0780
>> [ 61.114741] r4:c2e35000
>> [ 61.117294] [<c0a7a8b0>] (subdev_do_ioctl_lock) from [<c0a6c4b4>]
>> (video_usercopy+0x190/0x674)
>> [ 61.125913] r9:bea08dec r8:c2d91c00 r7:bea08dec r6:c0845657
>> r5:00000000 r4:c0845657
>> [ 61.133668] [<c0a6c324>] (video_usercopy) from [<c0a79254>]
>> (subdev_ioctl+0x20/0x24)
>> [ 61.141419] r10:c30372a8 r9:00000003 r8:c2ea0780 r7:bea08dec
>> r6:c2ea0780 r5:00000000
>> [ 61.149251] r4:c0a79234
>> [ 61.151797] [<c0a79234>] (subdev_ioctl) from [<c0a64920>]
>> (v4l2_ioctl+0x4c/0x60)
>> [ 61.159207] [<c0a648d4>] (v4l2_ioctl) from [<c05a90ac>]
>> (sys_ioctl+0x130/0xa74)
>> [ 61.166520] r5:00000000 r4:c0845657
>> [ 61.170107] [<c05a8f7c>] (sys_ioctl) from [<c03000c0>]
>> (ret_fast_syscall+0x0/0x54)
>> [ 61.177681] Exception stack(0xc48adfa8 to 0xc48adff0)
>> [ 61.182742] dfa0: 005023a4 004dad3c 00000003
>> c0845657 bea08dec 00000000
>> [ 61.190927] dfc0: 005023a4 004dad3c 00000003 00000036 0050c808
>> bea09494 bea08fa0 00000000
>> [ 61.199109] dfe0: 00500df8 bea08d2c 004a635d b6cde418
>> [ 61.204169] r10:00000036 r9:c48ac000 r8:c03002c4 r7:00000036
>> r6:00000003 r5:004dad3c
>> [ 61.212000] r4:005023a4
>>
>> I am attaching the device-tree changes as a file for reference. Any
>> ideas what is happening here?
>>
>> I can see 2 divisions:
>> 1. pdata->refclk_hz / pdata->pll_prd
>> 2. DIV_ROUND_UP(bps, bps_pr_lane)
>>
>> 1. should never be 0, since it is initialized during probe and then
>> never changed
>>
>> 2. see how the divisor can be 0
>> pdata->refclk_hz / pdata->pll_prd is the inversion of how pll_prd is
>> calculated, and should equal to 6MHz from probe.
>> pll_fbd is also set in probe: pll_fbd = bps_pr_lane / refclk_hz * pll_prd
>> As I have specified a link-frequency of 594MHz, that produces:
>> bps_pr_lane = 2 * 594MHz
>> pll_fbd = 2 * 594MHz / 27MHz * (27MHz / 6MHz) = 2 * 594MHz / 6MHz = 198
>>
>> Apparently from initialization, the division by zero can not occur :(
>> (unless I made a mistake here).
>>
>> Thank you for reading this far!
>> Yours sincerely
>> Josua Mayer
[-- Attachment #2: imx6-tc358743-div0.log --]
[-- Type: text/x-log, Size: 36798 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.0-7-armmp (debian-kernel@lists.debian.org) (arm-linux-gnueabihf-gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.40-2 (2021-05-29)
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: SolidRun HummingBoard Dual/Quad
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x4f000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] DMA zone: 1728 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 21 pages/cpu s54540 r8192 d23284 u86016
[ 0.000000] pcpu-alloc: s54540 r8192 d23284 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttymxc0,115200 deferred_probe_timeout=10 ahci_imx.hotplug=1 log_level=7 net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] Memory: 978788K/1048576K available (11264K kernel code, 1665K rwdata, 3184K rodata, 2048K init, 335K bss, 53404K reserved, 16384K cma-reserved, 245760K highmem)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x30/0x42c with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 37350 entries in 73 pages
[ 0.000000] ftrace: allocated 73 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000028] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.003258] Console: colour dummy device 80x30
[ 0.003313] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[ 0.003335] pid_max: default: 32768 minimum: 301
[ 0.003684] LSM: Security Framework initializing
[ 0.003790] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004077] AppArmor: AppArmor initialized
[ 0.004098] TOMOYO Linux initialized
[ 0.004221] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.004250] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.005554] CPU: Testing write buffer coherency: ok
[ 0.005605] CPU0: Spectre v2: using BPIALL workaround
[ 0.006027] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.007252] Setting up static identity map for 0x10300000 - 0x103000ac
[ 0.008739] rcu: Hierarchical SRCU implementation.
[ 0.011544] EFI services will not be available.
[ 0.012025] smp: Bringing up secondary CPUs ...
[ 0.013179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.013190] CPU1: Spectre v2: using BPIALL workaround
[ 0.013375] smp: Brought up 1 node, 2 CPUs
[ 0.013391] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.013402] CPU: All CPU(s) started in SVC mode.
[ 0.014247] devtmpfs: initialized
[ 0.025464] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.025813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.025901] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.027136] pinctrl core: initialized pinctrl subsystem
[ 0.028586] DMI not present or invalid.
[ 0.029028] NET: Registered protocol family 16
[ 0.032760] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.033791] audit: initializing netlink subsys (disabled)
[ 0.034096] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[ 0.035617] thermal_sys: Registered thermal governor 'fair_share'
[ 0.035627] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.035641] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035651] thermal_sys: Registered thermal governor 'user_space'
[ 0.035662] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.036036] CPU identified as i.MX6Q, silicon rev 1.5
[ 0.560362] No ATAGs?
[ 0.560507] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.560521] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.562373] debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!
[ 0.562715] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
[ 0.564701] Serial: AMBA PL011 UART driver
[ 0.572988] Kprobes globally optimized
[ 2.285860] mxs-dma 110000.dma-apbh: initialized
[ 2.291656] iommu: Default domain type: Translated
[ 2.292955] vgaarb: loaded
[ 2.294216] mc: Linux media interface: v0.10
[ 2.294280] videodev: Linux video capture interface: v2.00
[ 2.296290] NetLabel: Initializing
[ 2.296304] NetLabel: domain hash size = 128
[ 2.296313] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.296412] NetLabel: unlabeled traffic allowed by default
[ 2.296890] clocksource: Switched to clocksource mxc_timer1
[ 2.392598] VFS: Disk quotas dquot_6.6.0
[ 2.392731] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.393716] AppArmor: AppArmor Filesystem Enabled
[ 2.407665] NET: Registered protocol family 2
[ 2.408091] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.409866] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 2.409971] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 2.410186] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.410321] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.410651] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.410726] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.411544] NET: Registered protocol family 1
[ 2.411617] NET: Registered protocol family 44
[ 2.411641] PCI: CLS 0 bytes, default 64
[ 2.412405] Trying to unpack rootfs image as initramfs...
[ 4.465878] Freeing initrd memory: 23648K
[ 4.466546] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 4.466841] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 4.469759] Initialise system trusted keyrings
[ 4.469819] Key type blacklist registered
[ 4.470149] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 4.478148] zbud: loaded
[ 4.479412] integrity: Platform Keyring initialized
[ 4.479435] Key type asymmetric registered
[ 4.479448] Asymmetric key parser 'x509' registered
[ 4.480076] bounce: pool size: 64 pages
[ 4.480169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 4.480510] io scheduler mq-deadline registered
[ 4.502160] imx-sdma 20ec000.sdma: firmware: direct-loading firmware imx/sdma/sdma-imx6q.bin
[ 4.502838] imx-sdma 20ec000.sdma: loaded firmware 3.5
[ 4.510355] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 4.514129] Serial: AMBA driver
[ 4.515057] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 34, base_baud = 5000000) is a IMX
[ 5.286778] printk: console [ttymxc0] enabled
[ 5.292649] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 79, base_baud = 5000000) is a IMX
[ 5.303792] STM32 USART driver initialized
[ 5.311408] libphy: Fixed MDIO Bus: probed
[ 5.317626] mousedev: PS/2 mouse device common for all mice
[ 5.326659] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0
[ 5.332860] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
[ 5.347709] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.356033] NET: Registered protocol family 10
[ 5.418433] Segment Routing with IPv6
[ 5.422279] mip6: Mobile IPv6
[ 5.425279] NET: Registered protocol family 17
[ 5.429928] mpls_gso: MPLS GSO support
[ 5.434272] ThumbEE CPU extension supported.
[ 5.438585] Registering SWP/SWPB emulation handler
[ 5.443591] registered taskstats version 1
[ 5.447729] Loading compiled-in X.509 certificates
[ 5.847346] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 5.856213] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 5.866603] zswap: loaded using pool lzo/zbud
[ 5.871774] Key type ._fscrypt registered
[ 5.875846] Key type .fscrypt registered
[ 5.879834] Key type fscrypt-provisioning registered
[ 5.885118] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.948120] Freeing unused kernel memory: 2048K
[ 5.965608] ------------[ cut here ]------------
[ 5.970288] WARNING: CPU: 1 PID: 1 at arch/arm/mm/dump.c:248 note_page+0x3d0/0x3dc
[ 5.977887] arm/mm: Found insecure W+X mapping at address 0xf0879000
[ 5.984264] Modules linked in:
[ 5.987359] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.10.0-7-armmp #1 Debian 5.10.40-2
[ 5.995454] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 6.001985] Backtrace:
[ 6.004457] [<c0cf1fe8>] (dump_backtrace) from [<c0cf2394>] (show_stack+0x20/0x24)
[ 6.012038] r7:000000f8 r6:600e0013 r5:00000000 r4:c14cdc90
[ 6.017710] [<c0cf2374>] (show_stack) from [<c0cf74c4>] (dump_stack+0xc8/0xdc)
[ 6.024952] [<c0cf73fc>] (dump_stack) from [<c034d770>] (__warn+0xfc/0x158)
[ 6.031921] r7:000000f8 r6:00000009 r5:c031f5dc r4:c0fbbaf4
[ 6.037593] [<c034d674>] (__warn) from [<c0cf3148>] (warn_slowpath_fmt+0xa4/0xe4)
[ 6.045083] r7:c031f5dc r6:000000f8 r5:c0fbbaf4 r4:c0fbbac0
[ 6.050750] [<c0cf30a8>] (warn_slowpath_fmt) from [<c031f5dc>] (note_page+0x3d0/0x3dc)
[ 6.058674] r8:00000000 r7:00000000 r6:00000005 r5:c140c4a0 r4:c195bf28
[ 6.065382] [<c031f20c>] (note_page) from [<c031f6d0>] (walk_pmd+0xe8/0x1a4)
[ 6.072438] r10:c195bf28 r9:c0207c20 r8:c18db800 r7:00000000 r6:c0fbbb3c r5:f087b000
[ 6.080271] r4:c18db1ec
[ 6.082814] [<c031f5e8>] (walk_pmd) from [<c031f8d0>] (ptdump_check_wx+0x88/0x104)
[ 6.090392] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c0208000 r5:f0800000
[ 6.098225] r4:c0207c28
[ 6.100776] [<c031f848>] (ptdump_check_wx) from [<c03197d8>] (mark_rodata_ro+0x3c/0x40)
[ 6.108784] r6:00000000 r5:c0d0167c r4:00000000
[ 6.113420] [<c031979c>] (mark_rodata_ro) from [<c0d016c0>] (kernel_init+0x44/0x130)
[ 6.121175] [<c0d0167c>] (kernel_init) from [<c03001a8>] (ret_from_fork+0x14/0x2c)
[ 6.128748] Exception stack(0xc195bfb0 to 0xc195bff8)
[ 6.133806] bfa0: 00000000 00000000 00000000 00000000
[ 6.141990] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.150174] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 6.156792] r5:c0d0167c r4:00000000
[ 6.160408] ---[ end trace ab8e425bd50a74a1 ]---
[ 6.165270] Checked W+X mappings: FAILED, 1 W+X pages found
[ 6.170890] Run /init as init process
[ 6.174577] with arguments:
[ 6.174584] /init
[ 6.174591] with environment:
[ 6.174599] HOME=/
[ 6.174606] TERM=linux
[ 6.174612] log_level=7
[ 6.992804] gpio_mxc: module verification failed: signature and/or required key missing - tainting kernel
[ 7.040467] v_3v2: supplied by v_5v0
[ 7.044181] vcc_3v3: supplied by v_3v2
[ 7.060202] v_usb2: supplied by v_5v0
[ 7.081024] v_usb1: supplied by v_5v0
[ 7.098272] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
[ 7.101211] vdd1p1: supplied by regulator-dummy
[ 7.110471] vdd3p0: supplied by regulator-dummy
[ 7.119572] imx6q-pcie 1ffc000.pcie: IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
[ 7.122380] libphy: fec_enet_mii_bus: probed
[ 7.127778] imx6q-pcie 1ffc000.pcie: MEM 0x0001000000..0x0001efffff -> 0x0001000000
[ 7.134435] vdd2p5: supplied by regulator-dummy
[ 7.173532] vddarm: supplied by regulator-dummy
[ 7.178688] vddpu: supplied by regulator-dummy
[ 7.183686] vddsoc: supplied by regulator-dummy
[ 7.232179] mdio_bus 2188000.ethernet-1: MDIO device at address 4 is missing.
[ 7.260186] v_sd: supplied by v_3v2
[ 7.273570] SCSI subsystem initialized
[ 7.305525] libata version 3.00 loaded.
[ 7.311979] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
[ 7.319719] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 3330, using 00000480
[ 7.327524] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[ 7.335227] ahci-imx 2200000.sata: fsl,receive-eq-mdB value 3000, using 05000000
[ 7.361945] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator
[ 7.369561] ahci-imx 2200000.sata: supply phy not found, using dummy regulator
[ 7.372409] sdhci: Secure Digital Host Controller Interface driver
[ 7.376989] ahci-imx 2200000.sata: supply target not found, using dummy regulator
[ 7.383067] sdhci: Copyright(c) Pierre Ossman
[ 7.393166] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 7.401437] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.401997] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 7.416386] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 7.434548] scsi host0: ahci-imx
[ 7.437898] rtc-pcf8523 0-0068: low voltage detected, time is unreliable
[ 7.446738] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 82
[ 7.465218] rtc-pcf8523 0-0068: registered as rtc1
[ 7.466410] usbcore: registered new interface driver usbfs
[ 7.475851] usbcore: registered new interface driver hub
[ 7.481376] usbcore: registered new device driver usb
[ 7.493993] sdhci-esdhc-imx 2190000.mmc: allocated mmc-pwrseq
[ 7.509403] i2c i2c-0: IMX I2C adapter registered
[ 7.511790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.525729] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO
[ 7.527985] i2c i2c-1: IMX I2C adapter registered
[ 7.546975] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
[ 7.555182] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
[ 7.590986] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 7.597462] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 7.621241] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA
[ 7.628711] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 7.635824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 7.644176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.651430] usb usb1: Product: EHCI Host Controller
[ 7.656382] usb usb1: Manufacturer: Linux 5.10.0-7-armmp ehci_hcd
[ 7.662523] usb usb1: SerialNumber: ci_hdrc.0
[ 7.670136] hub 1-0:1.0: USB hub found
[ 7.675254] hub 1-0:1.0: 1 port detected
[ 7.690281] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 7.696531] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 7.714567] mmc1: host does not support reading read-only switch, assuming write-enable
[ 7.723905] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 7.731000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 7.739386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.746643] usb usb2: Product: EHCI Host Controller
[ 7.751550] usb usb2: Manufacturer: Linux 5.10.0-7-armmp ehci_hcd
[ 7.757670] usb usb2: SerialNumber: ci_hdrc.1
[ 7.763676] mmc1: new high speed SDXC card at address 0001
[ 7.771359] hub 2-0:1.0: USB hub found
[ 7.777603] mmcblk1: mmc1:0001 00000 59.6 GiB
[ 7.782565] hub 2-0:1.0: 1 port detected
[ 7.792453] mmcblk1: p1
[ 7.824990] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
[ 7.932995] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.940699] ata1.00: ATA-9: TS32GMSA370, 20140516, max UDMA/133
[ 7.946691] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 32)
[ 7.954547] ata1.00: configured for UDMA/133
[ 8.124932] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 8.256928] imx6q-pcie 1ffc000.pcie: Phy link never came up
[ 8.265844] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[ 8.272221] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 8.277746] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 8.283958] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[ 8.290956] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 8.297051] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 8.303378] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 8.310134] pci 0000:00:00.0: Limiting cfg_size to 512
[ 8.315412] pci 0000:00:00.0: supports D1
[ 8.319496] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 8.327294] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570, bcdDevice=32.99
[ 8.331929] PCI: bus0: Fast back to back transfers disabled
[ 8.335547] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.345881] PCI: bus1: Fast back to back transfers enabled
[ 8.348279] usb 2-1: Product: USB2.0 Hub
[ 8.353887] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[ 8.358859] hub 2-1:1.0: USB hub found
[ 8.364541] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
[ 8.364553] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 8.365126] pcieport 0000:00:00.0: PME: Signaling with IRQ 311
[ 8.370972] hub 2-1:1.0: 4 ports detected
[ 8.382227] pcieport 0000:00:00.0: AER: enabled with IRQ 311
[ 8.398969] scsi 0:0:0:0: Direct-Access ATA TS32GMSA370 0516 PQ: 0 ANSI: 5
[ 8.466092] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 8.474094] sd 0:0:0:0: [sda] Write Protect is off
[ 8.478963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.479384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.512980] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.524046] random: fast init done
[ 9.029163] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.365741] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 9.863746] systemd[1]: System time before build time, advancing clock.
[ 9.963825] systemd[1]: Inserted module 'autofs4'
[ 10.079555] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 10.102714] systemd[1]: Detected architecture arm.
[ 10.138127] systemd[1]: Set hostname to <sr-imx6>.
[ 11.138009] systemd[1]: Queued start job for default target Multi-User System.
[ 11.146808] random: systemd: uninitialized urandom read (16 bytes read)
[ 11.159138] systemd[1]: Created slice system-getty.slice.
[ 11.181193] random: systemd: uninitialized urandom read (16 bytes read)
[ 11.189890] systemd[1]: Created slice system-modprobe.slice.
[ 11.213123] random: systemd: uninitialized urandom read (16 bytes read)
[ 11.221868] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 11.246753] systemd[1]: Created slice User and Session Slice.
[ 11.269572] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.293462] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.318360] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.345362] systemd[1]: Reached target Local Encrypted Volumes.
[ 11.369471] systemd[1]: Reached target Paths.
[ 11.385235] systemd[1]: Reached target Remote File Systems.
[ 11.405174] systemd[1]: Reached target Slices.
[ 11.421361] systemd[1]: Reached target Swap.
[ 11.438031] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.461518] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.486160] systemd[1]: Listening on Journal Audit Socket.
[ 11.509958] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.534013] systemd[1]: Listening on Journal Socket.
[ 11.560717] systemd[1]: Listening on udev Control Socket.
[ 11.581891] systemd[1]: Listening on udev Kernel Socket.
[ 11.601982] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 11.616056] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.643295] systemd[1]: Mounting Kernel Debug File System...
[ 11.667718] systemd[1]: Mounting Kernel Trace File System...
[ 11.696180] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 11.728195] systemd[1]: Starting Load Kernel Module configfs...
[ 11.755978] systemd[1]: Starting Load Kernel Module drm...
[ 11.782029] systemd[1]: Starting Load Kernel Module fuse...
[ 11.807917] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.817473] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 11.841654] systemd[1]: Starting Journal Service...
[ 11.860488] fuse: init (API version 7.32)
[ 11.885351] systemd[1]: Starting Load Kernel Modules...
[ 11.919130] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.959354] systemd[1]: Starting Coldplug All udev Devices...
[ 12.025200] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.030455] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null)
[ 12.049904] systemd[1]: Mounted Kernel Debug File System.
[ 12.074058] systemd[1]: Mounted Kernel Trace File System.
[ 12.091534] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 12.131773] systemd[1]: modprobe@configfs.service: Succeeded.
[ 12.143130] systemd[1]: Finished Load Kernel Module configfs.
[ 12.171445] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.187480] systemd[1]: Finished Load Kernel Module drm.
[ 12.219541] systemd[1]: modprobe@fuse.service: Succeeded.
[ 12.235092] systemd[1]: Finished Load Kernel Module fuse.
[ 12.259916] systemd[1]: Finished Load Kernel Modules.
[ 12.283765] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.324279] systemd[1]: Mounting FUSE Control File System...
[ 12.366804] systemd[1]: Mounting Kernel Configuration File System...
[ 12.402602] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 12.411552] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 12.426957] systemd[1]: Starting Load/Save Random Seed...
[ 12.451212] systemd[1]: Starting Apply Kernel Variables...
[ 12.480087] systemd[1]: Starting Create System Users...
[ 12.507851] systemd[1]: Started Journal Service.
[ 12.720971] systemd-journald[176]: Received client request to flush runtime journal.
[ 12.754991] systemd-journald[176]: File /var/log/journal/9bbcae0a3ade4af68637450cb7940ea7/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.488383] Registered IR keymap rc-empty
[ 14.519846] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 14.537117] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[ 14.564692] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[ 14.585628] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 14.634052] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0
[ 14.725036] rc rc0: two consecutive events of type space
[ 14.785167] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.808298] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv])
[ 14.885127] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv])
[ 14.913150] imx6_media: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.923953] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv])
[ 14.930569] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 15.008976] random: crng init done
[ 15.014400] random: 7 urandom warning(s) missed due to ratelimiting
[ 15.061910] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 15.076995] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 15.083315] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 15.141725] coda 2040000.vpu: firmware: failed to load vpu_fw_imx6q.bin (-2)
[ 15.148860] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 15.158384] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2
[ 15.186742] CAN device driver interface
[ 15.226649] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0
[ 15.246427] coda 2040000.vpu: firmware: direct-loading firmware vpu/vpu_fw_imx6q.bin
[ 15.254350] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6q.bin
[ 15.274730] coda 2040000.vpu: Firmware code revision: 46076
[ 15.280378] coda 2040000.vpu: Initialized CODA960.
[ 15.285223] coda 2040000.vpu: Firmware version: 3.1.1
[ 15.291967] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm])
[ 15.300471] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm])
[ 15.309700] coda 2040000.vpu: encoder registered as video0
[ 15.315613] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm])
[ 15.323903] coda 2040000.vpu: decoder registered as video1
[ 15.350147] coda 2040000.vpu: encoder registered as video2
[ 15.377312] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm])
[ 15.411721] coda 2040000.vpu: decoder registered as video3
[ 15.458987] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY)
[ 15.495675] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 15.550325] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx])
[ 15.645640] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1
[ 15.665222] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 16.100460] platform imx6q-cpufreq: deferred probe pending
[ 16.106562] platform 20c8000.anatop:tempmon: deferred probe pending
[ 16.330566] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[ 16.393072] imx6_mipi_csi2: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.464751] sgtl5000 0-000a: Error reading chip id -6
[ 16.891557] tc358743 0-000f: initialized pll_prd = 4
[ 16.896618] tc358743 0-000f: unsupported bps per lane: 1188000000 bps
[ 16.960267] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.175326] systemd-journald[176]: Failed to read journal file /var/log/journal/9bbcae0a3ade4af68637450cb7940ea7/user-1000.journal for rotation, trying to move it out of the way: Text file busy
[ 17.203559] tc358743 0-000f: pll_prd = 4
[ 17.207588] tc358743 0-000f: pll_fbd = 0
[ 17.211539] Division by zero in kernel.
[ 17.215415] CPU: 1 PID: 208 Comm: systemd-udevd Tainted: G WC E 5.10.0-7-armmp #1 Debian 5.10.40-2
[ 17.225418] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 17.231947] Backtrace:
[ 17.234417] [<c0cf1fe8>] (dump_backtrace) from [<c0cf2394>] (show_stack+0x20/0x24)
[ 17.241993] r7:c28c5659 r6:60030013 r5:00000000 r4:c14cdc90
[ 17.247662] [<c0cf2374>] (show_stack) from [<c0cf74c4>] (dump_stack+0xc8/0xdc)
[ 17.254892] [<c0cf73fc>] (dump_stack) from [<c0cf216c>] (__div0+0x24/0x28)
[ 17.261770] r7:c28c5659 r6:c28c5504 r5:1a5e0000 r4:c28c5490
[ 17.267442] [<c0cf2148>] (__div0) from [<c07b1254>] (Ldiv0+0x8/0x10)
[ 17.273844] [<bf4cea34>] (tc358743_num_csi_lanes_needed [tc358743]) from [<bf4cec3c>] (tc358743_set_csi+0x1c/0x2f8 [tc358743])
[ 17.285239] r7:c28c5659 r6:bf4d2380 r5:c28c55e8 r4:c28c5490
[ 17.290929] [<bf4cec20>] (tc358743_set_csi [tc358743]) from [<bf4ccaac>] (tc358743_s_dv_timings+0x104/0x1a8 [tc358743])
[ 17.301724] r7:c28c5659 r6:bf4d2380 r5:c28c55e8 r4:c28c5490
[ 17.307430] [<bf4cc9a8>] (tc358743_s_dv_timings [tc358743]) from [<bf4ce384>] (tc358743_probe+0x93c/0xfec [tc358743])
[ 17.318060] r7:00008502 r6:c28c5574 r5:c28c5490 r4:c28c5440
[ 17.323757] [<bf4cda48>] (tc358743_probe [tc358743]) from [<c0a3ace4>] (i2c_device_probe+0x100/0x2e0)
[ 17.332987] r10:00000054 r9:bf4d20a0 r8:00000000 r7:bf4d20a0 r6:c1ae5c00 r5:00000000
[ 17.340818] r4:c1ae5c20
[ 17.343366] [<c0a3abe4>] (i2c_device_probe) from [<c098b3d8>] (really_probe+0x108/0x514)
[ 17.351464] r9:bf4d20a0 r8:00000000 r7:c15ed5a4 r6:00000000 r5:c15ed59c r4:c1ae5c20
[ 17.359214] [<c098b2d0>] (really_probe) from [<c098bc88>] (driver_probe_device+0x100/0x1d4)
[ 17.367571] r10:c1404e00 r9:bf4d2140 r8:c0fd4e44 r7:bf4d20a0 r6:c1ae5c64 r5:bf4d20a0
[ 17.375401] r4:c1ae5c20
[ 17.377944] [<c098bb88>] (driver_probe_device) from [<c098c08c>] (device_driver_attach+0xb8/0xc0)
[ 17.386822] r9:bf4d2140 r8:c0fd4e44 r7:bf4d20a0 r6:c1ae5c64 r5:00000000 r4:c1ae5c20
[ 17.394587] [<c098bfd4>] (device_driver_attach) from [<c098c130>] (__driver_attach+0x9c/0x150)
[ 17.403207] r7:c155cff4 r6:c1ae5c20 r5:bf4d20a0 r4:00000000
[ 17.408876] [<c098c094>] (__driver_attach) from [<c0988bb8>] (bus_for_each_dev+0x84/0xd0)
[ 17.417060] r7:c155cff4 r6:c098c094 r5:bf4d20a0 r4:00000000
[ 17.422727] [<c0988b34>] (bus_for_each_dev) from [<c098aaac>] (driver_attach+0x2c/0x30)
[ 17.430742] r6:00000000 r5:c2d3cb00 r4:bf4d20a0
[ 17.435371] [<c098aa80>] (driver_attach) from [<c098a460>] (bus_add_driver+0x120/0x20c)
[ 17.443382] [<c098a340>] (bus_add_driver) from [<c098cd24>] (driver_register+0x98/0x128)
[ 17.451479] r7:00000000 r6:bf4d214c r5:00000000 r4:bf4d20a0
[ 17.457151] [<c098cc8c>] (driver_register) from [<c0a3a2d8>] (i2c_register_driver+0x50/0xd0)
[ 17.465593] r5:c2d3e980 r4:bf4d2084
[ 17.469203] [<c0a3a288>] (i2c_register_driver) from [<bf4d5024>] (tc358743_driver_init+0x24/0x1000 [tc358743])
[ 17.479208] r5:c2d3e980 r4:bf4d5000
[ 17.482810] [<bf4d5000>] (tc358743_driver_init [tc358743]) from [<c0302948>] (do_one_initcall+0x50/0x27c)
[ 17.492387] [<c03028f8>] (do_one_initcall) from [<c040e27c>] (do_init_module+0x70/0x2a4)
[ 17.500482] r7:bf4d2270 r6:bf4d214c r5:c2d3e980 r4:bf4d2140
[ 17.506149] [<c040e20c>] (do_init_module) from [<c04108f8>] (load_module+0x232c/0x2760)
[ 17.514155] r6:bf4d214c r5:00000000 r4:c2985f30
[ 17.518778] [<c040e5cc>] (load_module) from [<c0411014>] (sys_finit_module+0xc8/0x12c)
[ 17.526703] r10:0000017b r9:c2984000 r8:c03002c4 r7:0000017b r6:b6f28504 r5:00000006
[ 17.534533] r4:00000000
[ 17.537078] [<c0410f4c>] (sys_finit_module) from [<c03002a4>] (__sys_trace_return+0x0/0x1c)
[ 17.545434] Exception stack(0xc2985fa8 to 0xc2985ff0)
[ 17.550493] 5fa0: b6f29708 00000000 00000006 b6f28504 00000000 b6f2927c
[ 17.558677] 5fc0: b6f29708 00000000 cbc85200 0000017b 01cd1370 004c972b 01cd2da8 01ccebb8
[ 17.566857] 5fe0: bed716e8 bed716d8 b6f22d49 b6e0f4f2
[ 17.571913] r6:cbc85200 r5:00000000 r4:b6f29708
[ 17.736927] raid6: neonx8 gen() 613 MB/s
[ 17.745874] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.765646] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.808914] raid6: neonx8 xor() 489 MB/s
[ 17.813414] tc358743 0-000f: tc358743 found @ 0x1e (21a0000.i2c)
[ 17.833031] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.843876] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.880928] raid6: neonx4 gen() 1506 MB/s
[ 17.909235] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4
[ 17.952927] raid6: neonx4 xor() 974 MB/s
[ 17.961480] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video5
[ 18.024898] raid6: neonx2 gen() 1403 MB/s
[ 18.052109] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video6
[ 18.096914] raid6: neonx2 xor() 949 MB/s
[ 18.113013] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video7
[ 18.166398] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video8
[ 18.168919] raid6: neonx1 gen() 1254 MB/s
[ 18.219902] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video9
[ 18.244899] raid6: neonx1 xor() 862 MB/s
[ 18.284123] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video10
[ 18.316941] raid6: int32x8 gen() 283 MB/s
[ 18.350464] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video11
[ 18.388929] raid6: int32x8 xor() 185 MB/s
[ 18.413948] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video12
[ 18.461011] raid6: int32x4 gen() 307 MB/s
[ 18.532923] raid6: int32x4 xor() 198 MB/s
[ 18.604965] raid6: int32x2 gen() 391 MB/s
[ 18.676931] raid6: int32x2 xor() 198 MB/s
[ 18.748921] raid6: int32x1 gen() 398 MB/s
[ 18.820945] raid6: int32x1 xor() 175 MB/s
[ 18.825253] raid6: using algorithm neonx4 gen() 1506 MB/s
[ 18.830694] raid6: .... xor() 974 MB/s, rmw enabled
[ 18.835608] raid6: using neon recovery algorithm
[ 19.631405] xor: measuring software checksum speed
[ 19.642821] arm4regs : 1529 MB/sec
[ 19.655866] 8regs : 1140 MB/sec
[ 19.668500] 32regs : 1220 MB/sec
[ 19.681464] neon : 1151 MB/sec
[ 19.685844] xor: using function: arm4regs (1529 MB/sec)
[ 20.018070] Qualcomm Atheros AR8035 2188000.ethernet-1:00: attached PHY driver [Qualcomm Atheros AR8035] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL)
[ 20.051889] Btrfs loaded, crc32c=crc32c-generic
[ 20.065199] BTRFS: device label ssd devid 1 transid 33605 /dev/sda scanned by systemd-udevd (209)
[ 24.125326] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 24.140969] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.853014] brcm_reg: disabling
^ permalink raw reply [flat|nested] 7+ messages in thread