From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.
Date: Thu, 14 Sep 2017 11:08:46 +0900 [thread overview]
Message-ID: <CAK7LNAQUS7efWUQCP0R4cd4XeNrgU5SJrK0yzqNEo+3Y4X9zmw@mail.gmail.com> (raw)
In-Reply-To: <1505303106-9780-1-git-send-email-yamada.masahiro@socionext.com>
2017-09-13 20:45 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>:
> buildman is 60% done, and no regression so far.
>
> I will report the full-stat when buildman is complete.
>
>
Finished buildman test.
No regression from the point of C grammar.
But, image size exceeded its platform limit
for some boards.
(ex. colibri_vf_defconfig)
This is because all pr_*() except pr_debug()
are now enabled.
So, more are more log message strings are compiled now.
Hmm, I need to implement
CONFIG_LOGLEVEL and CONFIG_SPL_LOGLEVEL now
to shut up lower priority log functions
such as pr_info(), pr_notice() ??
I will take a look.
The full-stat of buildman is as follows:
01: ARM: DRA72x: Add support for detection of DRA71x SR 2.1
aarch64: + nanopi_neo2 bananapi_m64 orangepi_prime orangepi_pc2
pine64_plus orangepi_win a64-olinuxino evb-rk3328 nanopi_a64
sopine_baseboard orangepi_zero_plus2
x86: + qemu-x86_64 qemu-x86_efi_payload64 chromebook_link64
arm: + am43xx_hs_evm am57xx_hs_evm imx6qdl_icore_rqs
am335x_hs_evm ethernut5 am43xx_evm imx6qdl_icore_nand
imx6qdl_icore_mmc dra7xx_hs_evm am43xx_evm_usbhost_boot db-88f6720
am335x_evm am57xx_evm dra7xx_evm
nds32: + adp-ag101p adp-ae3xx
+ src, &length)) {
+ ^
+In file included from ../common/spl/spl_fit.c:8:0:
+../include/common.h:627:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
+ int gunzip(void *, int, unsigned char *, unsigned long *);
+ ^~~~~~
+ if (gunzip((void *)load_addr, CONFIG_SYS_BOOTM_LEN,
+ ^
+../include/common.h:627:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
+ ^
+../arch/nds32/cpu/n1213/start.S: Assembler messages:
+../arch/nds32/cpu/n1213/start.S:109: Error: unknown pseudo-op: `.relax_hint'
+../arch/nds32/cpu/n1213/start.S:111: Error: unknown pseudo-op: `.relax_hint'
+../arch/nds32/cpu/n1213/start.S:113: Error: unrecognized form of
instruction `add5.pc $gp'
+make[2]: *** [../scripts/Makefile.build:316:
arch/nds32/cpu/n1213/start.o] Error 1
+make[1]: *** [Makefile:1279: arch/nds32/cpu/n1213] Error 2
+make: *** [Makefile:150: sub-make] Error 2
+arch/arm/dts/ethernut5.dtb: Warning (reg_format): "reg" property in
/i2c-gpio-0/pcf8563 at 50 has invalid length (4 bytes) (#address-cells ==
2, #size-cells == 1)
+arch/arm/dts/ethernut5.dtb: Warning (avoid_default_addr_size):
Relying on default #address-cells value for /i2c-gpio-0/pcf8563 at 50
+arch/arm/dts/ethernut5.dtb: Warning (avoid_default_addr_size):
Relying on default #size-cells value for /i2c-gpio-0/pcf8563 at 50
+WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
+Please read the section on ARM Trusted Firmware (ATF) in
board/sunxi/README.sunxi64
+<stdout>: Warning (unit_address_vs_reg): Node /images/uboot at 1 has a
unit name, but no reg property
+<stdout>: Warning (unit_address_vs_reg): Node /images/atf at 1 has a
unit name, but no reg property
+<stdout>: Warning (unit_address_vs_reg): Node /images/fdt at 1 has a
unit name, but no reg property
+<stdout>: Warning (unit_address_vs_reg): Node
/configurations/config at 1 has a unit name, but no reg property
+<stdout>: Warning (unit_address_vs_reg): Node /images/fdt at 2 has a
unit name, but no reg property
+<stdout>: Warning (unit_address_vs_reg): Node
/configurations/config at 2 has a unit name, but no reg property
+ writel((unsigned int) ep->dma_buf, ®->out_endp[ep_num].doepdma);
+ ^
+../arch/arm/include/asm/io.h:146:34: note: in definition of macro 'writel'
+ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
+ ^
+ port->priv->mdio_base = (void *)mdio_addr;
+ ^
+../arch/x86/lib/crt0_x86_64_efi.S: Assembler messages:
+../arch/x86/lib/crt0_x86_64_efi.S:16: Error: bad register name `%rsp'
+../arch/x86/lib/crt0_x86_64_efi.S:17: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:18: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:21: Error: bad register name `%rip)'
+../arch/x86/lib/crt0_x86_64_efi.S:22: Error: bad register name `%rip)'
+../arch/x86/lib/crt0_x86_64_efi.S:24: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:25: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:26: Error: bad register name `%rcx'
+../arch/x86/lib/crt0_x86_64_efi.S:27: Error: bad register name `%rdx'
+../arch/x86/lib/crt0_x86_64_efi.S:30: Error: bad register name `%rdi'
+../arch/x86/lib/crt0_x86_64_efi.S:31: Error: bad register name `%rsi'
+../arch/x86/lib/crt0_x86_64_efi.S:34: Error: bad register name `%rsp'
+../arch/x86/lib/crt0_x86_64_efi.S:47: Warning: setting incorrect
section attributes for .reloc
+make[2]: *** [../scripts/Makefile.build:316:
arch/x86/lib/crt0_x86_64_efi.o] Error 1
+make[1]: *** [Makefile:1279: arch/x86/lib] Error 2
w+../common/spl/spl_fit.c: In function 'spl_load_fit_image':
w+../common/spl/spl_fit.c:201:12: warning: passing argument 4 of
'gunzip' from incompatible pointer type [-Wincompatible-pointer-types]
w+../common/spl/spl_fit.c:200:7: warning: passing argument 4 of
'gunzip' from incompatible pointer type
w+../drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c: In function 'setdma_rx':
w+../drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c:116:9: warning: cast
from pointer to integer of different size [-Wpointer-to-int-cast]
w+../drivers/net/mvpp2.c: In function 'phy_info_parse':
w+../drivers/net/mvpp2.c:4751:27: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
02: printk: collect printk stuff into <linux/printk.h>
arm: + colibri_vf openrd_base vf610twr_nand openrd_ultimate
vf610twr openrd_client
-../include/common.h:627:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
-../include/common.h:627:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
+../include/common.h:623:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
+../include/common.h:623:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
+u-boot-nodtb.bin exceeds file size limit:
+ limit: 393216 bytes
+ actual: 434976 bytes
+ excess: 41760 bytes
+make[1]: *** [Makefile:945: u-boot-nodtb.bin] Error 1
+ limit: 524288 bytes
+ actual: 541568 bytes
+ excess: 17280 bytes
+ actual: 435000 bytes
+ excess: 41784 bytes
+ actual: 541520 bytes
+ excess: 17232 bytes
+ actual: 435024 bytes
+ excess: 41808 bytes
+ actual: 543952 bytes
+ excess: 19664 bytes
03: treewide: replace with error() with pr_err()
- actual: 434976 bytes
- excess: 41760 bytes
- actual: 541568 bytes
- excess: 17280 bytes
- actual: 435000 bytes
- excess: 41784 bytes
- actual: 541520 bytes
- excess: 17232 bytes
- actual: 435024 bytes
- excess: 41808 bytes
- actual: 543952 bytes
- excess: 19664 bytes
+ actual: 434624 bytes
+ excess: 41408 bytes
+ actual: 541184 bytes
+ excess: 16896 bytes
+ actual: 434656 bytes
+ excess: 41440 bytes
+ actual: 541136 bytes
+ excess: 16848 bytes
+ actual: 434672 bytes
+ excess: 41456 bytes
+ actual: 542608 bytes
+ excess: 18320 bytes
04: common.h: remove error()
-../include/common.h:623:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
-../include/common.h:623:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
+../include/common.h:618:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
+../include/common.h:618:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
05: vsprintf.h: include <linux/types.h>
06: bug.h: sync BUILD_BUG stuff with Linux 4.13
07: bug.h: move runtime BUG/WARN macros into <linux/bug.h>
-../include/common.h:618:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
-../include/common.h:618:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
- actual: 434624 bytes
- excess: 41408 bytes
- actual: 541184 bytes
- excess: 16896 bytes
- actual: 434656 bytes
- excess: 41440 bytes
- actual: 541136 bytes
- excess: 16848 bytes
- actual: 434672 bytes
- excess: 41456 bytes
- actual: 542608 bytes
- excess: 18320 bytes
+../include/common.h:611:5: note: expected 'long unsigned int *' but
argument is of type 'size_t * {aka unsigned int *}'
+../include/common.h:611:5: note: expected 'long unsigned int *' but
argument is of type 'size_t *'
+ actual: 434760 bytes
+ excess: 41544 bytes
+ actual: 541312 bytes
+ excess: 17024 bytes
+ actual: 434784 bytes
+ excess: 41568 bytes
+ actual: 541272 bytes
+ excess: 16984 bytes
+ actual: 434800 bytes
+ excess: 41584 bytes
+ actual: 542840 bytes
+ excess: 18552 bytes
--
Best Regards
Masahiro Yamada
prev parent reply other threads:[~2017-09-14 2:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-13 11:45 [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc Masahiro Yamada
2017-09-13 11:45 ` [U-Boot] [PATCH 1/6] printk: collect printk stuff into <linux/printk.h> Masahiro Yamada
2017-09-13 11:45 ` [U-Boot] [PATCH 2/6] treewide: replace with error() with pr_err() Masahiro Yamada
2017-09-17 17:52 ` Simon Glass
2017-09-13 11:45 ` [U-Boot] [PATCH 3/6] common.h: remove error() Masahiro Yamada
2017-09-13 11:45 ` [U-Boot] [PATCH 4/6] vsprintf.h: include <linux/types.h> Masahiro Yamada
2017-09-13 11:45 ` [U-Boot] [PATCH 5/6] bug.h: sync BUILD_BUG stuff with Linux 4.13 Masahiro Yamada
2017-09-13 11:45 ` [U-Boot] [PATCH 6/6] bug.h: move runtime BUG/WARN macros into <linux/bug.h> Masahiro Yamada
2017-09-14 2:08 ` Masahiro Yamada [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAK7LNAQUS7efWUQCP0R4cd4XeNrgU5SJrK0yzqNEo+3Y4X9zmw@mail.gmail.com \
--to=yamada.masahiro@socionext.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.