From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: open list <linux-kernel@vger.kernel.org>,
Linux-Next Mailing List <linux-next@vger.kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
lkft-triage@lists.linaro.org, regressions@lists.linux.dev
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Mark Brown <broonie@kernel.org>, Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Anders Roxell <anders.roxell@linaro.org>,
Aishwarya TCV <Aishwarya.TCV@arm.com>
Subject: FVP: kernel BUG at arch/arm64/kernel/traps.c:497 - Internal error: Oops - BUG: 0
Date: Tue, 12 Jul 2022 15:27:09 +0530 [thread overview]
Message-ID: <CA+G9fYtOX-6=f70FA5PuDVA=kX=2L4spXKXS8=LHkUphafXowg@mail.gmail.com> (raw)
FVP boot failed with linux next 20220712.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Boot log:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd0f0]
[ 0.000000] Linux version 5.19.0-rc6-next-20220711
(tuxmake@tuxmake) (aarch64-linux-gnu-gcc (Debian 11.3.0-3) 11.3.0, GNU
ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT @1657539508
[ 0.000000] Machine model: FVP Base RevC
[ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at
0x0000000018000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node vram@18000000,
compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7f6b40-0x8ff7f8fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 30 pages/cpu s82856 r8192 d31832 u122880
[ 0.000000] pcpu-alloc: s82856 r8192 d31832 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Branch Target Identification
[ 0.000000] CPU features: detected: Address authentication (IMP DEF
algorithm)
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1028096
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyAMA0
earlycon=pl011,0x1c090000 root=/dev/vda rw ip=dhcp debug user_debug=31
loglevel=9
[ 0.000000] Unknown kernel command line parameters
\"user_debug=31\", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem
0x00000000f9000000-0x00000000fd000000] (64MB)
[ 0.000000] Memory: 3947088K/4177920K available (20288K kernel
code, 4902K rwdata, 11308K rodata, 11136K init, 955K bss, 198064K
reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 65660 entries in 257 pages
[ 0.000000] ------------[ ftrace bug ]------------
[ 0.000000] ftrace failed to modify
[ 0.000000] [<ffff800009f80030>] udpv6_init+0x8/0x74
[ 0.000000] actual: 00:00:00:00
[ 0.000000] Initializing ftrace call sites
[ 0.000000] ftrace record flags: 0
[ 0.000000] (0)
[ 0.000000] expected tramp: ffff80000802f3a8
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2084
ftrace_bug+0x280/0x2b0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.19.0-rc6-next-20220711 #1
[ 0.000000] Hardware name: FVP Base RevC (DT)
[ 0.000000] pstate: 600000c9 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_bug+0x280/0x2b0
[ 0.000000] lr : ftrace_bug+0x280/0x2b0
[ 0.000000] sp : ffff80000a9e3d50
[ 0.000000] x29: ffff80000a9e3d50 x28: 0000000000000000 x27: ffff80000a9eed28
[ 0.000000] x26: 0000000000000052 x25: ffff80000a118008 x24: ffff80000aee3000
[ 0.000000] x23: 00000000ffffffea x22: ffff800009befc30 x21: ffff80000a9eed28
[ 0.000000] x20: ffff000800005510 x19: ffff80000a9ee000 x18: ffffffffffffffff
[ 0.000000] x17: 000000000000003f x16: 0000000000000008 x15: ffff80008a9e3a47
[ 0.000000] x14: 0000000000000000 x13: 3861336632303830 x12: 3030303866666666
[ 0.000000] x11: 203a706d61727420 x10: ffff80000aa6a960 x9 : ffff800008121910
[ 0.000000] x8 : 00000000ffffefff x7 : ffff80000aa6a960 x6 : 0000000000000000
[ 0.000000] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : ffff80000a9f9e40 x0 : 0000000000000022
[ 0.000000] Call trace:
[ 0.000000] ftrace_bug+0x280/0x2b0
[ 0.000000] ftrace_process_locs+0x310/0x400
[ 0.000000] ftrace_init+0xa0/0x16c
[ 0.000000] start_kernel+0x45c/0x738
[ 0.000000] __primary_switched+0xb8/0xc0
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ftrace: allocated 257 pages with 2 groups
[ 0.0#
00000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 224 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000002f100000
[ 0.000000] ITS [mem 0x2f020000-0x2f03ffff]
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Devices
@8800f0000 (indirect, esz 8, psz 64K, shr 1)
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Virtual CPUs
@880200000 (indirect, esz 8, psz 64K, shr 1)
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Interrupt
Collections @880210000 (flat, esz 8, psz 64K, shr 1)
[ 0.000000] GICv3: using LPI property table @0x0000000880220000
[ 0.000000] GICv3: CPU0: using allocated LPI pending table
@0x0000000880230000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] kfence: initialized - using 2097152 bytes for 255
objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000000] timer_sp804: timer clock not found: -517
[ 0.000000] timer_sp804: arm,sp804 clock not found: -2
[ 0.000000] Failed to initialize
'/bus@8000000/motherboard-bus/iofpga-bus@300000000/timer@110000': -22
[ 0.000000] timer_sp804: timer clock not found: -517
[ 0.000000] timer_sp804: arm,sp804 clock not found: -2
[ 0.000000] Failed to initialize
'/bus@8000000/motherboard-bus/iofpga-bus@300000000/timer@120000': -22
[ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff
max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[ 0.000009] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps
every 4398046511100ns
[ 0.001009] random: crng init done
[ 0.002015] Console: colour dummy device 80x25
[ 0.002709] Calibrating delay loop (skipped), value calculated
using timer frequency.. 200.00 BogoMIPS (lpj=400000)
[ 0.002949] pid_max: default: 32768 minimum: 301
[ 0.003909] LSM: Security Framework initializing
[ 0.004751] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.004915] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes, linear)
[ 0.012948] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.013122] Early cacheinfo failed, ret = -2
[ 0.023187] cblist_init_generic: Setting adjustable number of
callback queues.
[ 0.023309] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.024609] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.025809] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.028426] rcu: Hierarchical SRCU implementation.
[ 0.028590] rcu: Max phase no-delay instances is 1000.
[ 0.042209] Platform MSI: msi-controller@2f020000 domain created
[ 0.043171] PCI/MSI:
/interrupt-controller@2f000000/msi-controller@2f020000 domain created
[ 0.044359] fsl-mc MSI: msi-controller@2f020000 domain created
[ 0.052019] EFI services will not be available.
[ 0.057426] smp: Bringing up secondary CPUs ...
[ 0.064109] Detected PIPT I-cache on CPU1
[ 0.064230] GICv3: CPU1: found redistributor 100 region 0:0x000000002f120000
[ 0.064316] GICv3: CPU1: using allocated LPI pending table
@0x0000000880240000
[ 0.064509] CPU1: Booted secondary processor 0x0000000100 [0x410fd0f0]
[ 0.072609] Detected PIPT I-cache on CPU2
[ 0.072809] GICv3: CPU2: found redistributor 200 region 0:0x000000002f140000
[ 0.072809] GICv3: CPU2: using allocated LPI pending table
@0x0000000880250000
[ 0.073009] CPU2: Booted secondary processor 0x0000000200 [0x410fd0f0]
[ 0.081109] Detected PIPT I-cache on CPU3
[ 0.081209] GICv3: CPU3: found redistributor 300 region 0:0x000000002f160000
[ 0.081346] GICv3: CPU3: using allocated LPI pending table
@0x0000000880260000
[ 0.081510] CPU3: Booted secondary processor 0x0000000300 [0x410fd0f0]
[ 0.089809] Detected PIPT I-cache on CPU4
[ 0.090009] GICv3: CPU4: found redistributor 10000 region
0:0x000000002f180000
[ 0.090030] GICv3: CPU4: using allocated LPI pending table
@0x0000000880270000
[ 0.090261] CPU4: Booted secondary processor 0x0000010000 [0x410fd0f0]
[ 0.098509] Detected PIPT I-cache on CPU5
[ 0.098678] GICv3: CPU5: found redistributor 10100 region
0:0x000000002f1a0000
[ 0.098713] GICv3: CPU5: using allocated LPI pending table
@0x0000000880280000
[ 0.098909] CPU5: Booted secondary processor 0x0000010100 [0x410fd0f0]
[ 0.107010] Detected PIPT I-cache on CPU6
[ 0.107233] GICv3: CPU6: found redistributor 10200 region
0:0x000000002f1c0000
[ 0.107315] GICv3: CPU6: using allocated LPI pending table
@0x0000000880290000
[ 0.107441] CPU6: Booted secondary processor 0x0000010200 [0x410fd0f0]
[ 0.115909] Detected PIPT I-cache on CPU7
[ 0.116119] GICv3: CPU7: found redistributor 10300 region
0:0x000000002f1e0000
[ 0.116119] GICv3: CPU7: using allocated LPI pending table
@0x00000008802a0000
[ 0.116326] CPU7: Booted secondary processor 0x0000010300 [0x410fd0f0]
[ 0.117909] smp: Brought up 1 node, 8 CPUs
[ 0.119709] SMP: Total of 8 processors activated.
[ 0.119909] CPU features: detected: 32-bit EL0 Support
[ 0.120023] CPU features: detected: 32-bit EL1 Support
[ 0.120176] CPU features: detected: ARMv8.4 Translation Table Level
[ 0.120326] CPU features: detected: Data cache clean to the PoU not
required for I/D coherence
[ 0.120457] CPU features: detected: Common not Private translations
[ 0.120609] CPU features: detected: CRC32 instructions
[ 0.120717] CPU features: detected: E0PD
[ 0.120832] CPU features: detected: Enhanced Counter Virtualization
[ 0.121009] CPU features: detected: Generic authentication (IMP DEF
algorithm)
[ 0.121151] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.121323] CPU features: detected: LSE atomic instructions
[ 0.121809] CPU features: detected: Privileged Access Never
[ 0.121932] CPU features: detected: RAS Extension Support
[ 0.122060] CPU features: detected: Random Number Generator
[ 0.122209] CPU features: detected: Speculation barrier (SB)
[ 0.122309] CPU features: detected: Stage-2 Force Write-Back
[ 0.122470] CPU features: detected: TLB range maintenance instructions
[ 0.122634] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.122716] CPU features: detected: Scalable Vector Extension
[ 0.413916] SVE: maximum available vector length 64 bytes per vector
[ 0.414109] SVE: default vector length 64 bytes per vector
[ 0.430509] CPU features: No Cache Writeback Granule information,
assuming 128
[ 0.430655] CPU: All CPU(s) started at EL2
[ 0.449009] devtmpfs: initialized
[ 0.476391] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.476610] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.484509] pinctrl core: initialized pinctrl subsystem
[ 0.499875] DMI not present or invalid.
[ 0.500613] ------------[ cut here ]------------
[ 0.500709] kernel BUG at arch/arm64/kernel/traps.c:497!
[ 0.500777] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 0.500860] Modules linked in:
[ 0.500947] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
5.19.0-rc6-next-20220711 #1
[ 0.501034] Hardware name: FVP Base RevC (DT)
[ 0.501109] pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.501209] pc : do_undefinstr+0x284/0x2b4
[ 0.501381] lr : do_undefinstr+0x150/0x2b4
[ 0.501509] sp : ffff80000affbbc0
[ 0.501509] x29: ffff80000affbbc0 x28: ffff000800330000 x27: ffff800009f00444
[ 0.501759] x26: ffff800009fe6038 x25: 0000000000000001 x24: ffff80000a115968
[ 0.501923] x23: 0000000040400009 x22: ffff800009f80de0 x21: ffff80000affbd90
[ 0.502109] x20: 0000000001000000 x19: ffff80000affbc40 x18: ffffffffffffffff
[ 0.502309] x17: 000000000000003f x16: 000000000000000a x15: ffff0008002b1a1c
[ 0.502422] x14: ffffffffffffffff x13: ffff0008002b1268 x12: 20726f20746e6573
[ 0.502683] x11: ffff80000aa12950 x10: 0000000000000073 x9 : ffff8000093bcd6c
[ 0.502856] x8 : 000000003d4d554e x7 : ffff80000affbce0 x6 : 0000000000000001
[ 0.503030] x5 : ffff80000a9ef000 x4 : ffff80000a9ef2e0 x3 : 0000000000000000
[ 0.503234] x2 : ffff000800330000 x1 : ffff000800330000 x0 : 0000000040400009
[ 0.503409] Call trace:
[ 0.503480] do_undefinstr+0x284/0x2b4
[ 0.503562] el1_undef+0x30/0x60
[ 0.503709] el1h_64_sync_handler+0x84/0xd0
[ 0.503811] el1h_64_sync+0x64/0x68
[ 0.503909] net_sysctl_init+0x8/0x7c
[ 0.504053] do_one_initcall+0x50/0x2b0
[ 0.504158] kernel_init_freeable+0x24c/0x2d4
[ 0.504245] kernel_init+0x30/0x140
[ 0.504381] ret_from_fork+0x10/0x20
[ 0.504509] Code: 17ffff98 a9425bf5 17ffffbb a9025bf5 (d4210000)
[ 0.504627] ---[ end trace 0000000000000000 ]---
[ 0.504678] note: sw#
apper/0[1] exited with preempt_count 1
[ 0.504852] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 0.504939] SMP: stopping secondary CPUs
[ 0.505209] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x0000000b ]---
Build:
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220711/testrun/10743317/suite/log-parser-test/tests/
https://builds.tuxbuild.com/2BnQMpJj3kDTJXoCwd2pY5gW9CN/
Best regards
Naresh Kamboju
--
Linaro LKFT
https://lkft.linaro.org
WARNING: multiple messages have this Message-ID (diff)
From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: open list <linux-kernel@vger.kernel.org>,
Linux-Next Mailing List <linux-next@vger.kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
lkft-triage@lists.linaro.org, regressions@lists.linux.dev
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Mark Brown <broonie@kernel.org>, Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Anders Roxell <anders.roxell@linaro.org>,
Aishwarya TCV <Aishwarya.TCV@arm.com>
Subject: FVP: kernel BUG at arch/arm64/kernel/traps.c:497 - Internal error: Oops - BUG: 0
Date: Tue, 12 Jul 2022 15:27:09 +0530 [thread overview]
Message-ID: <CA+G9fYtOX-6=f70FA5PuDVA=kX=2L4spXKXS8=LHkUphafXowg@mail.gmail.com> (raw)
FVP boot failed with linux next 20220712.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Boot log:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd0f0]
[ 0.000000] Linux version 5.19.0-rc6-next-20220711
(tuxmake@tuxmake) (aarch64-linux-gnu-gcc (Debian 11.3.0-3) 11.3.0, GNU
ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT @1657539508
[ 0.000000] Machine model: FVP Base RevC
[ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at
0x0000000018000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node vram@18000000,
compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7f6b40-0x8ff7f8fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 30 pages/cpu s82856 r8192 d31832 u122880
[ 0.000000] pcpu-alloc: s82856 r8192 d31832 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Branch Target Identification
[ 0.000000] CPU features: detected: Address authentication (IMP DEF
algorithm)
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: patching kernel code
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1028096
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyAMA0
earlycon=pl011,0x1c090000 root=/dev/vda rw ip=dhcp debug user_debug=31
loglevel=9
[ 0.000000] Unknown kernel command line parameters
\"user_debug=31\", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem
0x00000000f9000000-0x00000000fd000000] (64MB)
[ 0.000000] Memory: 3947088K/4177920K available (20288K kernel
code, 4902K rwdata, 11308K rodata, 11136K init, 955K bss, 198064K
reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 65660 entries in 257 pages
[ 0.000000] ------------[ ftrace bug ]------------
[ 0.000000] ftrace failed to modify
[ 0.000000] [<ffff800009f80030>] udpv6_init+0x8/0x74
[ 0.000000] actual: 00:00:00:00
[ 0.000000] Initializing ftrace call sites
[ 0.000000] ftrace record flags: 0
[ 0.000000] (0)
[ 0.000000] expected tramp: ffff80000802f3a8
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2084
ftrace_bug+0x280/0x2b0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.19.0-rc6-next-20220711 #1
[ 0.000000] Hardware name: FVP Base RevC (DT)
[ 0.000000] pstate: 600000c9 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : ftrace_bug+0x280/0x2b0
[ 0.000000] lr : ftrace_bug+0x280/0x2b0
[ 0.000000] sp : ffff80000a9e3d50
[ 0.000000] x29: ffff80000a9e3d50 x28: 0000000000000000 x27: ffff80000a9eed28
[ 0.000000] x26: 0000000000000052 x25: ffff80000a118008 x24: ffff80000aee3000
[ 0.000000] x23: 00000000ffffffea x22: ffff800009befc30 x21: ffff80000a9eed28
[ 0.000000] x20: ffff000800005510 x19: ffff80000a9ee000 x18: ffffffffffffffff
[ 0.000000] x17: 000000000000003f x16: 0000000000000008 x15: ffff80008a9e3a47
[ 0.000000] x14: 0000000000000000 x13: 3861336632303830 x12: 3030303866666666
[ 0.000000] x11: 203a706d61727420 x10: ffff80000aa6a960 x9 : ffff800008121910
[ 0.000000] x8 : 00000000ffffefff x7 : ffff80000aa6a960 x6 : 0000000000000000
[ 0.000000] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : ffff80000a9f9e40 x0 : 0000000000000022
[ 0.000000] Call trace:
[ 0.000000] ftrace_bug+0x280/0x2b0
[ 0.000000] ftrace_process_locs+0x310/0x400
[ 0.000000] ftrace_init+0xa0/0x16c
[ 0.000000] start_kernel+0x45c/0x738
[ 0.000000] __primary_switched+0xb8/0xc0
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] ftrace: allocated 257 pages with 2 groups
[ 0.0#
00000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 224 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000002f100000
[ 0.000000] ITS [mem 0x2f020000-0x2f03ffff]
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Devices
@8800f0000 (indirect, esz 8, psz 64K, shr 1)
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Virtual CPUs
@880200000 (indirect, esz 8, psz 64K, shr 1)
[ 0.000000] ITS@0x000000002f020000: allocated 8192 Interrupt
Collections @880210000 (flat, esz 8, psz 64K, shr 1)
[ 0.000000] GICv3: using LPI property table @0x0000000880220000
[ 0.000000] GICv3: CPU0: using allocated LPI pending table
@0x0000000880230000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] kfence: initialized - using 2097152 bytes for 255
objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000000] timer_sp804: timer clock not found: -517
[ 0.000000] timer_sp804: arm,sp804 clock not found: -2
[ 0.000000] Failed to initialize
'/bus@8000000/motherboard-bus/iofpga-bus@300000000/timer@110000': -22
[ 0.000000] timer_sp804: timer clock not found: -517
[ 0.000000] timer_sp804: arm,sp804 clock not found: -2
[ 0.000000] Failed to initialize
'/bus@8000000/motherboard-bus/iofpga-bus@300000000/timer@120000': -22
[ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff
max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[ 0.000009] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps
every 4398046511100ns
[ 0.001009] random: crng init done
[ 0.002015] Console: colour dummy device 80x25
[ 0.002709] Calibrating delay loop (skipped), value calculated
using timer frequency.. 200.00 BogoMIPS (lpj=400000)
[ 0.002949] pid_max: default: 32768 minimum: 301
[ 0.003909] LSM: Security Framework initializing
[ 0.004751] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.004915] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes, linear)
[ 0.012948] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.013122] Early cacheinfo failed, ret = -2
[ 0.023187] cblist_init_generic: Setting adjustable number of
callback queues.
[ 0.023309] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.024609] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.025809] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.028426] rcu: Hierarchical SRCU implementation.
[ 0.028590] rcu: Max phase no-delay instances is 1000.
[ 0.042209] Platform MSI: msi-controller@2f020000 domain created
[ 0.043171] PCI/MSI:
/interrupt-controller@2f000000/msi-controller@2f020000 domain created
[ 0.044359] fsl-mc MSI: msi-controller@2f020000 domain created
[ 0.052019] EFI services will not be available.
[ 0.057426] smp: Bringing up secondary CPUs ...
[ 0.064109] Detected PIPT I-cache on CPU1
[ 0.064230] GICv3: CPU1: found redistributor 100 region 0:0x000000002f120000
[ 0.064316] GICv3: CPU1: using allocated LPI pending table
@0x0000000880240000
[ 0.064509] CPU1: Booted secondary processor 0x0000000100 [0x410fd0f0]
[ 0.072609] Detected PIPT I-cache on CPU2
[ 0.072809] GICv3: CPU2: found redistributor 200 region 0:0x000000002f140000
[ 0.072809] GICv3: CPU2: using allocated LPI pending table
@0x0000000880250000
[ 0.073009] CPU2: Booted secondary processor 0x0000000200 [0x410fd0f0]
[ 0.081109] Detected PIPT I-cache on CPU3
[ 0.081209] GICv3: CPU3: found redistributor 300 region 0:0x000000002f160000
[ 0.081346] GICv3: CPU3: using allocated LPI pending table
@0x0000000880260000
[ 0.081510] CPU3: Booted secondary processor 0x0000000300 [0x410fd0f0]
[ 0.089809] Detected PIPT I-cache on CPU4
[ 0.090009] GICv3: CPU4: found redistributor 10000 region
0:0x000000002f180000
[ 0.090030] GICv3: CPU4: using allocated LPI pending table
@0x0000000880270000
[ 0.090261] CPU4: Booted secondary processor 0x0000010000 [0x410fd0f0]
[ 0.098509] Detected PIPT I-cache on CPU5
[ 0.098678] GICv3: CPU5: found redistributor 10100 region
0:0x000000002f1a0000
[ 0.098713] GICv3: CPU5: using allocated LPI pending table
@0x0000000880280000
[ 0.098909] CPU5: Booted secondary processor 0x0000010100 [0x410fd0f0]
[ 0.107010] Detected PIPT I-cache on CPU6
[ 0.107233] GICv3: CPU6: found redistributor 10200 region
0:0x000000002f1c0000
[ 0.107315] GICv3: CPU6: using allocated LPI pending table
@0x0000000880290000
[ 0.107441] CPU6: Booted secondary processor 0x0000010200 [0x410fd0f0]
[ 0.115909] Detected PIPT I-cache on CPU7
[ 0.116119] GICv3: CPU7: found redistributor 10300 region
0:0x000000002f1e0000
[ 0.116119] GICv3: CPU7: using allocated LPI pending table
@0x00000008802a0000
[ 0.116326] CPU7: Booted secondary processor 0x0000010300 [0x410fd0f0]
[ 0.117909] smp: Brought up 1 node, 8 CPUs
[ 0.119709] SMP: Total of 8 processors activated.
[ 0.119909] CPU features: detected: 32-bit EL0 Support
[ 0.120023] CPU features: detected: 32-bit EL1 Support
[ 0.120176] CPU features: detected: ARMv8.4 Translation Table Level
[ 0.120326] CPU features: detected: Data cache clean to the PoU not
required for I/D coherence
[ 0.120457] CPU features: detected: Common not Private translations
[ 0.120609] CPU features: detected: CRC32 instructions
[ 0.120717] CPU features: detected: E0PD
[ 0.120832] CPU features: detected: Enhanced Counter Virtualization
[ 0.121009] CPU features: detected: Generic authentication (IMP DEF
algorithm)
[ 0.121151] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.121323] CPU features: detected: LSE atomic instructions
[ 0.121809] CPU features: detected: Privileged Access Never
[ 0.121932] CPU features: detected: RAS Extension Support
[ 0.122060] CPU features: detected: Random Number Generator
[ 0.122209] CPU features: detected: Speculation barrier (SB)
[ 0.122309] CPU features: detected: Stage-2 Force Write-Back
[ 0.122470] CPU features: detected: TLB range maintenance instructions
[ 0.122634] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.122716] CPU features: detected: Scalable Vector Extension
[ 0.413916] SVE: maximum available vector length 64 bytes per vector
[ 0.414109] SVE: default vector length 64 bytes per vector
[ 0.430509] CPU features: No Cache Writeback Granule information,
assuming 128
[ 0.430655] CPU: All CPU(s) started at EL2
[ 0.449009] devtmpfs: initialized
[ 0.476391] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.476610] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.484509] pinctrl core: initialized pinctrl subsystem
[ 0.499875] DMI not present or invalid.
[ 0.500613] ------------[ cut here ]------------
[ 0.500709] kernel BUG at arch/arm64/kernel/traps.c:497!
[ 0.500777] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 0.500860] Modules linked in:
[ 0.500947] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
5.19.0-rc6-next-20220711 #1
[ 0.501034] Hardware name: FVP Base RevC (DT)
[ 0.501109] pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.501209] pc : do_undefinstr+0x284/0x2b4
[ 0.501381] lr : do_undefinstr+0x150/0x2b4
[ 0.501509] sp : ffff80000affbbc0
[ 0.501509] x29: ffff80000affbbc0 x28: ffff000800330000 x27: ffff800009f00444
[ 0.501759] x26: ffff800009fe6038 x25: 0000000000000001 x24: ffff80000a115968
[ 0.501923] x23: 0000000040400009 x22: ffff800009f80de0 x21: ffff80000affbd90
[ 0.502109] x20: 0000000001000000 x19: ffff80000affbc40 x18: ffffffffffffffff
[ 0.502309] x17: 000000000000003f x16: 000000000000000a x15: ffff0008002b1a1c
[ 0.502422] x14: ffffffffffffffff x13: ffff0008002b1268 x12: 20726f20746e6573
[ 0.502683] x11: ffff80000aa12950 x10: 0000000000000073 x9 : ffff8000093bcd6c
[ 0.502856] x8 : 000000003d4d554e x7 : ffff80000affbce0 x6 : 0000000000000001
[ 0.503030] x5 : ffff80000a9ef000 x4 : ffff80000a9ef2e0 x3 : 0000000000000000
[ 0.503234] x2 : ffff000800330000 x1 : ffff000800330000 x0 : 0000000040400009
[ 0.503409] Call trace:
[ 0.503480] do_undefinstr+0x284/0x2b4
[ 0.503562] el1_undef+0x30/0x60
[ 0.503709] el1h_64_sync_handler+0x84/0xd0
[ 0.503811] el1h_64_sync+0x64/0x68
[ 0.503909] net_sysctl_init+0x8/0x7c
[ 0.504053] do_one_initcall+0x50/0x2b0
[ 0.504158] kernel_init_freeable+0x24c/0x2d4
[ 0.504245] kernel_init+0x30/0x140
[ 0.504381] ret_from_fork+0x10/0x20
[ 0.504509] Code: 17ffff98 a9425bf5 17ffffbb a9025bf5 (d4210000)
[ 0.504627] ---[ end trace 0000000000000000 ]---
[ 0.504678] note: sw#
apper/0[1] exited with preempt_count 1
[ 0.504852] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 0.504939] SMP: stopping secondary CPUs
[ 0.505209] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x0000000b ]---
Build:
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220711/testrun/10743317/suite/log-parser-test/tests/
https://builds.tuxbuild.com/2BnQMpJj3kDTJXoCwd2pY5gW9CN/
Best regards
Naresh Kamboju
--
Linaro LKFT
https://lkft.linaro.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-07-12 9:57 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 9:57 Naresh Kamboju [this message]
2022-07-12 9:57 ` FVP: kernel BUG at arch/arm64/kernel/traps.c:497 - Internal error: Oops - BUG: 0 Naresh Kamboju
2022-07-12 11:54 ` Mark Brown
2022-07-12 11:54 ` Mark Brown
2022-07-13 19:37 ` Naresh Kamboju
2022-07-13 19:37 ` Naresh Kamboju
2022-07-14 11:26 ` Mark Rutland
2022-07-14 11:26 ` Mark Rutland
2022-07-14 11:42 ` Mark Brown
2022-07-14 11:42 ` Mark Brown
2022-07-14 12:57 ` Mark Rutland
2022-07-14 12:57 ` Mark Rutland
2022-07-14 13:06 ` Mark Rutland
2022-07-14 13:06 ` Mark Rutland
2022-07-14 13:39 ` Mark Rutland
2022-07-14 13:39 ` Mark Rutland
2022-07-14 14:05 ` Naresh Kamboju
2022-07-14 14:05 ` Naresh Kamboju
2022-07-15 12:28 ` Mark Brown
2022-07-15 12:28 ` Mark Brown
2022-07-14 11:37 ` Mark Brown
2022-07-14 11:37 ` Mark Brown
2022-07-12 12:49 ` Mark Rutland
2022-07-12 12:49 ` Mark Rutland
2022-07-12 12:52 ` Mark Brown
2022-07-12 12:52 ` Mark Brown
2022-07-12 16:21 ` Mark Rutland
2022-07-12 16:21 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+G9fYtOX-6=f70FA5PuDVA=kX=2L4spXKXS8=LHkUphafXowg@mail.gmail.com' \
--to=naresh.kamboju@linaro.org \
--cc=Aishwarya.TCV@arm.com \
--cc=anders.roxell@linaro.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=mark.rutland@arm.com \
--cc=regressions@lists.linux.dev \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.