All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed

From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Daniil Stas <daniil.stas@posteo.net>, <u-boot@lists.denx.de>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Subject: Re: [PATCH] spi: stm32_qspi: Fix short data write operation
Date: Mon, 24 May 2021 09:40:05 +0200	[thread overview]
Message-ID: <4e531f04-4228-05e6-6bdb-32c29becb38f@foss.st.com> (raw)
In-Reply-To: <20210523222449.1495352-2-daniil.stas@posteo.net>

Hi Daniil

On 5/24/21 12:24 AM, Daniil Stas wrote:
> TCF flag only means that all data was sent to FIFO. To check if the
> data was sent out of FIFO we should also wait for the BUSY flag to be
> cleared. Otherwise there is a race condition which can lead to
> inability to write short (one byte long) data.
> 
> Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>  drivers/spi/stm32_qspi.c | 29 +++++++++++++++--------------
>  1 file changed, 15 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c
> index 4acc9047b9..8f4aabc3d1 100644
> --- a/drivers/spi/stm32_qspi.c
> +++ b/drivers/spi/stm32_qspi.c
> @@ -148,23 +148,24 @@ static int _stm32_qspi_wait_cmd(struct stm32_qspi_priv *priv,
>  				const struct spi_mem_op *op)
>  {
>  	u32 sr;
> -	int ret;
> -
> -	if (!op->data.nbytes)
> -		return _stm32_qspi_wait_for_not_busy(priv);
> +	int ret = 0;
>  
> -	ret = readl_poll_timeout(&priv->regs->sr, sr,
> -				 sr & STM32_QSPI_SR_TCF,
> -				 STM32_QSPI_CMD_TIMEOUT_US);
> -	if (ret) {
> -		log_err("cmd timeout (stat:%#x)\n", sr);
> -	} else if (readl(&priv->regs->sr) & STM32_QSPI_SR_TEF) {
> -		log_err("transfer error (stat:%#x)\n", sr);
> -		ret = -EIO;
> +	if (op->data.nbytes) {
> +		ret = readl_poll_timeout(&priv->regs->sr, sr,
> +					 sr & STM32_QSPI_SR_TCF,
> +					 STM32_QSPI_CMD_TIMEOUT_US);
> +		if (ret) {
> +			log_err("cmd timeout (stat:%#x)\n", sr);
> +		} else if (readl(&priv->regs->sr) & STM32_QSPI_SR_TEF) {
> +			log_err("transfer error (stat:%#x)\n", sr);
> +			ret = -EIO;
> +		}
> +		/* clear flags */
> +		writel(STM32_QSPI_FCR_CTCF | STM32_QSPI_FCR_CTEF, &priv->regs->fcr);
>  	}
>  
> -	/* clear flags */
> -	writel(STM32_QSPI_FCR_CTCF | STM32_QSPI_FCR_CTEF, &priv->regs->fcr);
> +	if (!ret)
> +		ret = _stm32_qspi_wait_for_not_busy(priv);
>  
>  	return ret;
>  }
> 

Have you got a simple test to reproduce the described race condition ?

Thanks
Patrice

next prev parent reply	other threads:[~2021-05-24  7:40 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-23 22:24 [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts Daniil Stas
2021-05-23 22:24 ` [PATCH] spi: stm32_qspi: Fix short data write operation Daniil Stas
2021-05-24  7:40   ` Patrice CHOTARD [this message]
2021-05-24 12:53     ` Daniil Stas
2021-05-25 16:02       ` Patrice CHOTARD
2021-06-18  8:01         ` Patrice CHOTARD
2021-06-01 15:31   ` Patrick DELAUNAY
2021-05-24  8:30 ` [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts Patrice CHOTARD
2021-05-25  6:53 ` Ramon Fried
2021-06-01 15:26 ` Patrick DELAUNAY
2021-06-12 18:36 ` Ramon Fried

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4e531f04-4228-05e6-6bdb-32c29becb38f@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=daniil.stas@posteo.net \
    --cc=patrick.delaunay@foss.st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.