From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Dave Airlie <airlied@gmail.com>, Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dim-tools@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PULL] drm-misc-next
Date: Thu, 3 Mar 2022 10:28:29 +0100 [thread overview]
Message-ID: <48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com> (raw)
drm-misc-next-2022-03-03:
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
The following changes since commit f915686bd97a9c234602426e6d132b74a112a8d6:
drm/selftests: add drm buddy pathological testcase (2022-02-23 10:46:32 +0100)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm-misc tags/drm-misc-next-2022-03-03
for you to fetch changes up to 701920ca9822eb63b420b3bcb627f2c1ec759903:
drm/ssd130x: remove redundant initialization of pointer mode (2022-03-03 09:28:55 +0100)
----------------------------------------------------------------
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
----------------------------------------------------------------
Cai Huoqing (1):
drm/nouveau: Remove the unused header file nvif/list.h
Colin Ian King (1):
drm/ssd130x: remove redundant initialization of pointer mode
Daniel Vetter (1):
drm/todo: Update panic handling todo
Dave Stevenson (3):
drm/object: Add drm_object_property_get_default_value() function
drm/object: Add default zpos value at reset
drm/object: Add default color encoding and range value at reset
Hans de Goede (1):
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
Hsin-Yi Wang (2):
drm/bridge: it6505: Fix the read buffer array bound
drm/bridge: Clear the DP_AUX_I2C_MOT bit passed in aux read command.
Jagan Teki (1):
drm: of: Lookup if child node has panel or bridge
Javier Martinez Canillas (1):
drm/repaper: Use format helper for xrgb8888 to monochrome conversion
José Expósito (1):
drm/bridge: chipone-icn6211: switch to devm_drm_of_get_bridge
Kees Cook (2):
drm/dp: Fix off-by-one in register cache size
drm/dp: Fix OOB read when handling Post Cursor2 register
Liu Ying (1):
drm/bridge: nwl-dsi: Remove superfluous write to NWL_DSI_IRQ_MASK register
Maxime Ripard (8):
drm/omap: plane: Fix zpos initial value mismatch
drm/msm/mdp5: Remove redundant zpos initialisation
drm/nouveau/kms: Remove redundant zpos initialisation
drm/omap: plane: Remove redundant zpos initialisation
drm/rcar: plane: Remove redundant zpos initialisation
drm/sti: plane: Remove redundant zpos initialisation
drm/sun4i: layer: Remove redundant zpos initialisation
drm/omap: plane: Remove redundant color encoding and range initialisation
Melissa Wen (1):
drm/v3d: centralize error handling when init scheduler fails
Nathan Chancellor (1):
drm/stm: Avoid using val uninitialized in ltdc_set_ycbcr_config()
Nishanth Menon (1):
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
Noralf Trønnes (5):
dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
drm/modes: Remove trailing whitespace
drm/modes: Add of_get_drm_panel_display_mode()
drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
drm/tiny: Add MIPI DBI compatible SPI driver
Rahul T R (1):
drm/panel: simple: Initialize bpc in RK101II01D-CT panel descriptor
Raphael Gallais-Pou (1):
drm/stm: ltdc: add support for CRC hashing feature
Thomas Zimmermann (5):
fbdev: Improve performance of sys_fillrect()
fbdev: Improve performance of sys_imageblit()
fbdev: Remove trailing whitespaces from cfbimgblt.c
fbdev: Improve performance of cfb_imageblit()
drm: Add TODO item for optimizing format helpers
Tom Rix (1):
drm/panfrost: cleanup comments
Tommy Haung (2):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
Xin Ji (1):
drm/bridge: anx7625: Fix release wrong workqueue
.../bindings/display/panel/panel-mipi-dbi-spi.yaml | 126 +++++++
Documentation/gpu/todo.rst | 47 ++-
MAINTAINERS | 8 +
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 +-
drivers/gpu/drm/bridge/analogix/anx7625.c | 6 +-
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
drivers/gpu/drm/bridge/chipone-icn6211.c | 7 +-
drivers/gpu/drm/bridge/ite-it6505.c | 4 +-
drivers/gpu/drm/bridge/nwl-dsi.c | 14 +-
drivers/gpu/drm/dp/drm_dp.c | 10 -
drivers/gpu/drm/drm_atomic_state_helper.c | 25 ++
drivers/gpu/drm/drm_mode_object.c | 53 ++-
drivers/gpu/drm/drm_modes.c | 51 ++-
drivers/gpu/drm/drm_of.c | 17 +
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 16 +-
drivers/gpu/drm/nouveau/dispnv50/wndw.c | 2 -
drivers/gpu/drm/nouveau/include/nvif/list.h | 353 ------------------
drivers/gpu/drm/omapdrm/omap_plane.c | 22 +-
drivers/gpu/drm/panel/panel-simple.c | 1 +
drivers/gpu/drm/panfrost/panfrost_drv.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_issues.h | 2 +-
drivers/gpu/drm/panfrost/panfrost_mmu.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_regs.h | 2 +-
drivers/gpu/drm/rcar-du/rcar_du_plane.c | 1 -
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 1 -
drivers/gpu/drm/solomon/ssd130x.c | 2 +-
drivers/gpu/drm/sti/sti_cursor.c | 2 +-
drivers/gpu/drm/sti/sti_gdp.c | 2 +-
drivers/gpu/drm/sti/sti_hqvdp.c | 2 +-
drivers/gpu/drm/sti/sti_plane.c | 6 -
drivers/gpu/drm/sti/sti_plane.h | 1 -
drivers/gpu/drm/stm/ltdc.c | 107 +++++-
drivers/gpu/drm/stm/ltdc.h | 3 +
drivers/gpu/drm/sun4i/sun4i_layer.c | 16 +-
drivers/gpu/drm/tegra/dp.c | 11 +-
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 +++++++++++++++++++++
drivers/gpu/drm/tiny/repaper.c | 24 +-
drivers/gpu/drm/tiny/simpledrm.c | 3 +
drivers/gpu/drm/v3d/v3d_sched.c | 40 +--
drivers/video/fbdev/core/cfbimgblt.c | 107 ++++--
drivers/video/fbdev/core/sysfillrect.c | 16 +-
drivers/video/fbdev/core/sysimgblt.c | 49 ++-
include/drm/dp/drm_dp_helper.h | 4 +-
include/drm/drm_mipi_dbi.h | 8 +
include/drm/drm_mode_object.h | 7 +
include/drm/drm_modes.h | 8 +
50 files changed, 1051 insertions(+), 572 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
delete mode 100644 drivers/gpu/drm/nouveau/include/nvif/list.h
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
WARNING: multiple messages have this Message-ID (diff)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Dave Airlie <airlied@gmail.com>, Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
dim-tools@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
Thomas Zimmermann <tzimmermann@suse.de>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
intel-gfx@lists.freedesktop.org
Subject: [PULL] drm-misc-next
Date: Thu, 3 Mar 2022 10:28:29 +0100 [thread overview]
Message-ID: <48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com> (raw)
drm-misc-next-2022-03-03:
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
The following changes since commit f915686bd97a9c234602426e6d132b74a112a8d6:
drm/selftests: add drm buddy pathological testcase (2022-02-23 10:46:32 +0100)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm-misc tags/drm-misc-next-2022-03-03
for you to fetch changes up to 701920ca9822eb63b420b3bcb627f2c1ec759903:
drm/ssd130x: remove redundant initialization of pointer mode (2022-03-03 09:28:55 +0100)
----------------------------------------------------------------
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
----------------------------------------------------------------
Cai Huoqing (1):
drm/nouveau: Remove the unused header file nvif/list.h
Colin Ian King (1):
drm/ssd130x: remove redundant initialization of pointer mode
Daniel Vetter (1):
drm/todo: Update panic handling todo
Dave Stevenson (3):
drm/object: Add drm_object_property_get_default_value() function
drm/object: Add default zpos value at reset
drm/object: Add default color encoding and range value at reset
Hans de Goede (1):
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels
Hsin-Yi Wang (2):
drm/bridge: it6505: Fix the read buffer array bound
drm/bridge: Clear the DP_AUX_I2C_MOT bit passed in aux read command.
Jagan Teki (1):
drm: of: Lookup if child node has panel or bridge
Javier Martinez Canillas (1):
drm/repaper: Use format helper for xrgb8888 to monochrome conversion
José Expósito (1):
drm/bridge: chipone-icn6211: switch to devm_drm_of_get_bridge
Kees Cook (2):
drm/dp: Fix off-by-one in register cache size
drm/dp: Fix OOB read when handling Post Cursor2 register
Liu Ying (1):
drm/bridge: nwl-dsi: Remove superfluous write to NWL_DSI_IRQ_MASK register
Maxime Ripard (8):
drm/omap: plane: Fix zpos initial value mismatch
drm/msm/mdp5: Remove redundant zpos initialisation
drm/nouveau/kms: Remove redundant zpos initialisation
drm/omap: plane: Remove redundant zpos initialisation
drm/rcar: plane: Remove redundant zpos initialisation
drm/sti: plane: Remove redundant zpos initialisation
drm/sun4i: layer: Remove redundant zpos initialisation
drm/omap: plane: Remove redundant color encoding and range initialisation
Melissa Wen (1):
drm/v3d: centralize error handling when init scheduler fails
Nathan Chancellor (1):
drm/stm: Avoid using val uninitialized in ltdc_set_ycbcr_config()
Nishanth Menon (1):
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
Noralf Trønnes (5):
dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
drm/modes: Remove trailing whitespace
drm/modes: Add of_get_drm_panel_display_mode()
drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
drm/tiny: Add MIPI DBI compatible SPI driver
Rahul T R (1):
drm/panel: simple: Initialize bpc in RK101II01D-CT panel descriptor
Raphael Gallais-Pou (1):
drm/stm: ltdc: add support for CRC hashing feature
Thomas Zimmermann (5):
fbdev: Improve performance of sys_fillrect()
fbdev: Improve performance of sys_imageblit()
fbdev: Remove trailing whitespaces from cfbimgblt.c
fbdev: Improve performance of cfb_imageblit()
drm: Add TODO item for optimizing format helpers
Tom Rix (1):
drm/panfrost: cleanup comments
Tommy Haung (2):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
Xin Ji (1):
drm/bridge: anx7625: Fix release wrong workqueue
.../bindings/display/panel/panel-mipi-dbi-spi.yaml | 126 +++++++
Documentation/gpu/todo.rst | 47 ++-
MAINTAINERS | 8 +
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 +-
drivers/gpu/drm/bridge/analogix/anx7625.c | 6 +-
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
drivers/gpu/drm/bridge/chipone-icn6211.c | 7 +-
drivers/gpu/drm/bridge/ite-it6505.c | 4 +-
drivers/gpu/drm/bridge/nwl-dsi.c | 14 +-
drivers/gpu/drm/dp/drm_dp.c | 10 -
drivers/gpu/drm/drm_atomic_state_helper.c | 25 ++
drivers/gpu/drm/drm_mode_object.c | 53 ++-
drivers/gpu/drm/drm_modes.c | 51 ++-
drivers/gpu/drm/drm_of.c | 17 +
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 16 +-
drivers/gpu/drm/nouveau/dispnv50/wndw.c | 2 -
drivers/gpu/drm/nouveau/include/nvif/list.h | 353 ------------------
drivers/gpu/drm/omapdrm/omap_plane.c | 22 +-
drivers/gpu/drm/panel/panel-simple.c | 1 +
drivers/gpu/drm/panfrost/panfrost_drv.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_gem_shrinker.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_issues.h | 2 +-
drivers/gpu/drm/panfrost/panfrost_mmu.c | 2 +-
drivers/gpu/drm/panfrost/panfrost_regs.h | 2 +-
drivers/gpu/drm/rcar-du/rcar_du_plane.c | 1 -
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 1 -
drivers/gpu/drm/solomon/ssd130x.c | 2 +-
drivers/gpu/drm/sti/sti_cursor.c | 2 +-
drivers/gpu/drm/sti/sti_gdp.c | 2 +-
drivers/gpu/drm/sti/sti_hqvdp.c | 2 +-
drivers/gpu/drm/sti/sti_plane.c | 6 -
drivers/gpu/drm/sti/sti_plane.h | 1 -
drivers/gpu/drm/stm/ltdc.c | 107 +++++-
drivers/gpu/drm/stm/ltdc.h | 3 +
drivers/gpu/drm/sun4i/sun4i_layer.c | 16 +-
drivers/gpu/drm/tegra/dp.c | 11 +-
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 +++++++++++++++++++++
drivers/gpu/drm/tiny/repaper.c | 24 +-
drivers/gpu/drm/tiny/simpledrm.c | 3 +
drivers/gpu/drm/v3d/v3d_sched.c | 40 +--
drivers/video/fbdev/core/cfbimgblt.c | 107 ++++--
drivers/video/fbdev/core/sysfillrect.c | 16 +-
drivers/video/fbdev/core/sysimgblt.c | 49 ++-
include/drm/dp/drm_dp_helper.h | 4 +-
include/drm/drm_mipi_dbi.h | 8 +
include/drm/drm_mode_object.h | 7 +
include/drm/drm_modes.h | 8 +
50 files changed, 1051 insertions(+), 572 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
delete mode 100644 drivers/gpu/drm/nouveau/include/nvif/list.h
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
next reply other threads:[~2022-03-03 9:28 UTC|newest]
Thread overview: 169+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-03 9:28 Maarten Lankhorst [this message]
2022-03-03 9:28 ` [PULL] drm-misc-next Maarten Lankhorst
-- strict thread matches above, loose matches on Subject: below --
2023-12-07 9:59 [Intel-gfx] " Maxime Ripard
2023-11-30 9:15 Maxime Ripard
2023-11-23 12:58 Maxime Ripard
2023-11-23 19:40 ` Daniel Vetter
2023-11-17 9:41 Maxime Ripard
2023-11-20 9:31 ` Daniel Vetter
2023-11-03 16:37 David Edelsohn
2023-11-06 10:01 ` Thomas Hellström
2023-11-06 10:20 ` Maxime Ripard
2023-11-06 10:37 ` Thomas Hellström
2023-11-06 10:47 ` Thomas Hellström
2023-11-06 10:55 ` Maxime Ripard
2023-11-06 14:57 ` David Edelsohn
2023-10-27 7:17 Maarten Lankhorst
2023-10-19 11:40 Maarten Lankhorst
2023-10-12 9:40 Maarten Lankhorst
2023-10-06 8:37 Maarten Lankhorst
2023-09-27 10:09 Maarten Lankhorst
2023-09-11 12:45 Maarten Lankhorst
2023-08-10 8:45 Thomas Zimmermann
2023-08-03 15:01 Thomas Zimmermann
2023-07-27 12:44 Thomas Zimmermann
2023-07-27 13:10 ` Daniel Vetter
2023-07-21 14:50 Maxime Ripard
2023-07-27 13:00 ` Daniel Vetter
2023-07-13 9:08 Thomas Zimmermann
2023-07-18 10:25 ` Daniel Vetter
2023-06-07 8:56 Thomas Zimmermann
2023-06-01 11:22 Thomas Zimmermann
2023-05-24 12:42 Thomas Zimmermann
2023-05-11 7:28 Maxime Ripard
2023-05-17 16:44 ` Thomas Zimmermann
2023-04-12 13:32 Maarten Lankhorst
2023-04-12 14:24 ` Daniel Vetter
2023-03-31 15:42 Maarten Lankhorst
2023-04-03 8:24 ` Daniel Vetter
2023-03-23 11:08 Maarten Lankhorst
2023-03-24 19:21 ` Daniel Vetter
2023-03-16 15:39 Maarten Lankhorst
2023-03-07 10:14 Maarten Lankhorst
2023-01-26 8:15 Thomas Zimmermann
2023-01-24 20:02 Thomas Zimmermann
2023-01-19 8:47 Thomas Zimmermann
2023-01-23 15:00 ` John Paul Adrian Glaubitz
2023-01-23 15:13 ` Thomas Zimmermann
2023-01-23 15:23 ` John Paul Adrian Glaubitz
2023-01-23 15:35 ` Thomas Zimmermann
2023-01-23 15:48 ` John Paul Adrian Glaubitz
2023-02-02 14:54 ` Deucher, Alexander
2023-01-24 16:56 ` Daniel Vetter
2023-01-12 12:56 Thomas Zimmermann
2023-01-03 10:51 Thomas Zimmermann
2023-01-04 15:18 ` Daniel Vetter
2022-11-24 7:46 Maxime Ripard
2022-11-17 8:36 Maxime Ripard
2022-11-10 8:36 Maxime Ripard
2022-11-03 8:34 Maxime Ripard
2022-10-27 7:34 Maxime Ripard
2022-10-20 7:24 Maxime Ripard
2022-09-30 8:54 Maarten Lankhorst
2022-09-23 7:39 Maxime Ripard
2022-09-09 8:46 Maarten Lankhorst
2022-09-06 6:53 Maarten Lankhorst
2022-09-06 15:20 ` Daniel Vetter
2022-07-07 7:13 Thomas Zimmermann
2022-06-30 7:19 Thomas Zimmermann
2022-06-23 8:02 Thomas Zimmermann
2022-06-23 8:07 ` Thomas Zimmermann
2022-06-23 8:26 ` Jani Nikula
2022-06-23 8:36 ` Thomas Zimmermann
2022-06-23 8:56 ` Jani Nikula
2022-06-24 22:12 ` Daniel Vetter
2022-06-17 7:21 Thomas Zimmermann
2022-06-08 10:34 Thomas Zimmermann
2022-06-15 18:14 ` Daniel Vetter
2022-05-05 13:11 Maxime Ripard
2022-04-28 7:52 Maxime Ripard
2022-04-21 6:59 Maxime Ripard
2022-04-14 7:38 Maxime Ripard
2022-04-07 8:59 Maxime Ripard
2022-02-23 12:49 Maarten Lankhorst
2022-01-27 11:57 Maarten Lankhorst
2022-02-01 6:38 ` Dave Airlie
2022-02-01 8:17 ` Maarten Lankhorst
2022-02-01 11:14 ` Thomas Zimmermann
2022-02-22 20:17 ` Thomas Zimmermann
2021-12-16 14:34 Thomas Zimmermann
2021-12-09 11:46 Thomas Zimmermann
2021-11-29 8:56 Thomas Zimmermann
2021-12-14 8:53 ` Daniel Vetter
2021-11-18 9:13 Thomas Zimmermann
2021-10-14 12:04 Maxime Ripard
2021-10-14 13:24 ` Hans de Goede
2021-10-14 14:30 ` Hans de Goede
2021-10-06 10:48 Maarten Lankhorst
2021-09-30 11:27 Maxime Ripard
2021-09-23 7:45 Maxime Ripard
2021-09-16 7:31 Maxime Ripard
2021-09-20 22:29 ` Rob Herring
2021-09-22 7:44 ` Maxime Ripard
2021-08-12 19:34 Maarten Lankhorst
2021-08-05 10:22 Maarten Lankhorst
2021-07-29 20:57 Maarten Lankhorst
2021-07-22 10:46 Maarten Lankhorst
2021-07-16 11:07 Maarten Lankhorst
2021-07-21 4:03 ` Dave Airlie
2021-07-21 8:44 ` Thomas Zimmermann
2021-06-10 11:15 Thomas Zimmermann
2021-06-10 13:32 ` Daniel Vetter
2021-06-11 6:53 ` Thomas Zimmermann
2021-06-09 7:42 Thomas Zimmermann
2021-06-01 15:11 Thomas Zimmermann
2021-05-17 13:17 Thomas Zimmermann
2021-05-17 13:25 ` Thomas Zimmermann
2021-05-12 14:19 Thomas Zimmermann
2021-04-09 9:00 Maxime Ripard
2021-04-01 11:05 Maxime Ripard
2021-03-25 9:47 Maxime Ripard
2021-03-16 8:03 Maxime Ripard
2021-03-03 10:06 Maxime Ripard
2021-01-19 11:39 Maarten Lankhorst
2021-01-20 12:11 ` Daniel Vetter
2021-01-06 11:13 Maarten Lankhorst
2021-01-07 12:42 ` Daniel Vetter
2020-12-17 10:12 Maarten Lankhorst
2021-01-07 9:59 ` Daniel Vetter
2020-11-27 8:30 Thomas Zimmermann
2020-11-18 12:32 Thomas Zimmermann
2020-11-12 8:01 Thomas Zimmermann
2020-11-05 10:16 Thomas Zimmermann
2020-10-27 10:09 Thomas Zimmermann
2020-10-27 10:11 ` Thomas Zimmermann
2020-09-21 15:29 Maxime Ripard
2020-09-18 8:11 Maxime Ripard
2020-09-10 8:18 Maxime Ripard
2020-09-03 16:06 Maxime Ripard
2020-08-27 15:55 Maxime Ripard
2020-08-20 12:56 Maxime Ripard
2020-08-26 10:02 ` Jani Nikula
2020-08-30 6:05 ` Daniel Vetter
2020-07-22 10:38 Maarten Lankhorst
2020-07-16 11:42 Maarten Lankhorst
2020-07-02 13:16 Maarten Lankhorst
2020-06-26 10:52 Maarten Lankhorst
2020-06-19 15:19 Maarten Lankhorst
2020-05-14 7:08 Thomas Zimmermann
2020-05-07 7:25 Thomas Zimmermann
2020-04-23 8:34 Thomas Zimmermann
2020-04-14 9:07 Thomas Zimmermann
2020-04-21 12:46 ` Thomas Zimmermann
2020-04-21 13:41 ` Daniel Vetter
2020-04-21 14:05 ` Thomas Zimmermann
2020-03-17 8:28 Maxime Ripard
2020-03-09 13:54 Maxime Ripard
2020-02-27 11:32 Maxime Ripard
2020-02-21 10:09 Maxime Ripard
2020-02-10 9:34 Maxime Ripard
2020-01-10 11:50 Maarten Lankhorst
2020-01-07 11:50 Maarten Lankhorst
2020-01-07 15:25 ` Daniel Vetter
2020-01-02 13:06 Maarten Lankhorst
2019-12-17 8:48 Maarten Lankhorst
2019-12-17 12:59 ` Daniel Vetter
2019-10-31 19:30 Sean Paul
2019-10-31 19:30 ` Sean Paul
2019-10-24 15:55 Sean Paul
2019-10-24 15:55 ` Sean Paul
2019-10-17 19:26 Sean Paul
2019-10-18 13:45 ` Tomi Valkeinen
2019-10-18 20:11 ` Sean Paul
2019-10-21 8:09 ` Tomi Valkeinen
2019-10-21 15:48 ` Sean Paul
2019-10-22 2:17 ` [Intel-gfx] " Dave Airlie
2019-10-22 7:01 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=airlied@gmail.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dim-tools@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=mripard@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.