From: sikumar3@cisco.com
To: meta-freescale@lists.yoctoproject.org
Subject: IMX6UL SUMO: linux-imx_4.14.98.bb:do_compile fail due to arm-poky-linux-gnueabi-gcc: Command not found error
Date: Thu, 13 Feb 2020 09:14:52 -0800 [thread overview]
Message-ID: <Xa8B.1581614092818892028.bHng@lists.yoctoproject.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 3915 bytes --]
Hi,
My hardware is based on IMX6ULEVK.
I have pulled yocto SUMO version (imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml) and added few layers in the sources/base/conf/bblayer.conf file. I have also introduced new machine type imx6uloib which is the clone of imxulevk
project sources/base/
diff --git a/conf/bblayers.conf b/conf/bblayers.conf
index 092d58b..f803796 100644
--- a/conf/bblayers.conf
+++ b/conf/bblayers.conf
@@ -14,4 +14,7 @@ BBLAYERS = " \
${BSPDIR}/sources/meta-freescale \
${BSPDIR}/sources/meta-freescale-3rdparty \
${BSPDIR}/sources/meta-freescale-distro \
+ ${BSPDIR}/sources/meta-inode-eval \
+ ${BSPDIR}/sources/meta-inode-oib \
+ ${BSPDIR}/sources/meta-inode-release \
I am getting build errors when trying to build.
DISTRO=fsl-imx-xwayland MACHINE=imx6uloib source fsl-setup-release.sh -b build-ul
bitbake core-image-base
ERROR: linux-imx-4.14.98-r0 do_compile: oe_runmake failed
ERROR: linux-imx-4.14.98-r0 do_compile: Function failed: do_compile (log file is located at /nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/temp/log.do_compile.2640)
ERROR: Logfile of failure stored in: /nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/temp/log.do_compile.2640
Log data follows:
| DEBUG: Executing shell function do_compile
| /nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/temp/run.do_compile.2640: line 185: arm-poky-linux-gnueabi-gcc: command not found
| NOTE: make -j 16 HOSTCC=gcc -isystem/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/usr/include -O2 -pipe -L/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/usr/lib -L/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/lib -Wl,-rpath,/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native/lib -Wl,-O1 HOSTCPP=gcc -E ARCH=arm ARCH=arm zImage CC=arm-poky-linux-gnueabi-gcc -fuse-ld=bfd -fdebug-prefix-map=/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0=/usr/src/debug/linux-imx/4.14.98-r0 -fdebug-prefix-map=/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot= -fdebug-prefix-map=/nobackup/sikumar3/inode_sumo/build-ul/tmp/work/imx6uloib-poky-linux-gnueabi/linux-imx/4.14.98-r0/recipe-sysroot-native= -fdebug-prefix-map=/nobackup/sikumar3/inode_sumo/build-ul/tmp/work-shared/imx6uloib/kernel-source=/usr/src/kernel LD=arm-poky-linux-gnueabi-ld.bfd LOADADDR=0x10008000
| /nobackup/sikumar3/inode_sumo/build-ul/tmp/work-shared/imx6uloib/kernel-source/scripts/gcc-version.sh: line 26: arm-poky-linux-gnueabi-gcc: command not found
| /nobackup/sikumar3/inode_sumo/build-ul/tmp/work-shared/imx6uloib/kernel-source/scripts/gcc-version.sh: line 27: arm-poky-linux-gnueabi-gcc: command not found
| make[2]: arm-poky-linux-gnueabi-gcc: Command not found
| make[2]: arm-poky-linux-gnueabi-gcc: Command not found
| make[2]: arm-poky-linux-gnueabi-gcc: Command not found
I see that arm-poky-linux-gnueabi-gcc is present in /build/tmp/work/ directory. But, i am not sure why it is not able to pick it up.
[-- Attachment #2: Type: text/html, Size: 5285 bytes --]
reply other threads:[~2020-02-13 17:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Xa8B.1581614092818892028.bHng@lists.yoctoproject.org \
--to=sikumar3@cisco.com \
--cc=meta-freescale@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).