From: pavithra.r@gadgeon.com
To: meta-freescale@lists.yoctoproject.org
Subject: i.MX28 custom board ethernet link toggling up and down
Date: Mon, 11 May 2020 09:28:41 +0530 [thread overview]
Message-ID: <CAA6tZ=uxOhERm4T=0qJxDYttE2Gu2Yk0VRoSgcHzN8UJ91C=Ww@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3674 bytes --]
Hi Team,
We are using a Custom imx28-evk based board with the latest iMX yocto
images (Zeus) ported into it. Linux version 5.4.20-fslc+g18d5e274c780.
The problem is when the board boots up we keep on getting prints from
Ethernet driver like this:-
Configuring network interfaces... [ 15.759903] SMSC LAN8710/LAN8720
800f0000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720]
(mii_bus:phy_addr=800f0000.ethernet-1:00, irq=POLL)
udhcpc: started, v1.31.0
udhcpc: sending discover
[ 17.871399] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
[ 18.940173] fec 800f0000.ethernet eth0: Link is Down
udhcpc: sending discover
[ 19.949639] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
[ 21.019241] fec 800f0000.ethernet eth0: Link is Down
[ 22.029599] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
udhcpc: sending discover
[ 23.099242] fec 800f0000.ethernet eth0: Link is Down
[ 24.109620] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
[ 25.180685] fec 800f0000.ethernet eth0: Link is Down
Board never gets assigned any IP. This prints goes on forever. Ethernet
works fine in bootloader. We are able to do TFTP from u-boot.
Also in the kernel everything works fine with static ip configuration with
a PC.
There are no errors in packet reception. output of ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:00:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:66 (66.0 B) TX bytes:5130 (5.0 KiB)
We have seen that exact issue listed in a forum
https://patchwork.ozlabs.org/project/netdev/patch/20151127120919.66f2bfda@ipc1.ka-ro/
But this was a five year old post and seems like the mentioned patch is not
relevant at all.
Our device tree contents are
<arch/arm/boot/dts/imx28.dtsi>
mac0: ethernet@800f0000 {
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
clocks = <&clks 57>, <&clks 57>, <&clks 64>;
clock-names = "ipg", "ahb", "enet_out";
status = "disabled";
};
<arch/arm/boot/dts/imx28-evk.dts>
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-supply = <®_fec_3v3>;
phy-reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1000>;
status = "okay";
};
Note: when we manually set the link speed to 10mbps using ethtool, Ethernet
works fine.This issue occurs with 100mbps speed and it seems to have some
issue with autonegotiation.
Please consider this issue in priority and help to resolve this issue at
the earliest.
*Regards*,
Pavithra R
Hardware Engineer
Gadgeon Smart Systems
m: +91-94965-18808 (India)
w: www.gadgeon.com
<https://link.aeusercontent.com/mt/lt/D78C05ADDA56BE856A051569556899538/1?targetURL=https%3A%2F%2Fwww.gadgeon.com%2F>
www.delpheon.io
<https://link.aeusercontent.com/mt/lt/D78C05ADDA56BE856A051569556899538/2?targetURL=https%3A%2F%2Fdelpheon.io%2F>
[image: www.linkedin.com/in/hariprasad-vnair]
<https://www.linkedin.com/in/pavithra-rudrakumar/>
[-- Attachment #2: Type: text/html, Size: 9686 bytes --]
reply other threads:[~2020-05-11 3:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA6tZ=uxOhERm4T=0qJxDYttE2Gu2Yk0VRoSgcHzN8UJ91C=Ww@mail.gmail.com' \
--to=pavithra.r@gadgeon.com \
--cc=meta-freescale@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).