From: Robert Marko <robert.marko@sartura.hr>
To: trini@konsulko.com, caleb.connolly@linaro.org,
neil.armstrong@linaro.org, sumit.garg@linaro.org,
u-boot@lists.denx.de, u-boot-qcom@groups.io
Cc: j.beck@linefinity.com, Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH v2 3/3] arm: dts: drop downstream IPQ4019 DTSI
Date: Tue, 14 May 2024 12:17:52 +0200 [thread overview]
Message-ID: <20240514101824.23872-3-robert.marko@sartura.hr> (raw)
In-Reply-To: <20240514101824.23872-1-robert.marko@sartura.hr>
We want to use OF_UPSTREAM on IPQ40XX as its well supported upstream, so
lets drop our downstream DTSI.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
---
arch/arm/dts/qcom-ipq4019.dtsi | 202 ---------------------------------
1 file changed, 202 deletions(-)
delete mode 100644 arch/arm/dts/qcom-ipq4019.dtsi
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
deleted file mode 100644
index f9489e42ea..0000000000
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2019 Sartura Ltd.
- *
- * Author: Robert Marko <robert.marko@sartura.hr>
- */
-
- /dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
-#include <dt-bindings/reset/qcom,ipq4019-reset.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- model = "Qualcomm Technologies, Inc. IPQ4019";
- compatible = "qcom,ipq4019";
-
- aliases {
- serial0 = &blsp1_uart1;
- spi0 = &blsp1_spi1;
- };
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- smem_mem: smem_region: smem@87e00000 {
- reg = <0x87e00000 0x080000>;
- no-map;
- };
-
- tz@87e80000 {
- reg = <0x87e80000 0x180000>;
- no-map;
- };
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- };
-
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "simple-bus";
-
- gcc: clock-controller@1800000 {
- compatible = "qcom,gcc-ipq4019";
- reg = <0x1800000 0x60000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- bootph-all;
- };
-
- rng: rng@22000 {
- compatible = "qcom,prng";
- reg = <0x22000 0x140>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- status = "disabled";
- };
-
- soc_gpios: pinctrl@1000000 {
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x1000000 0x300000>;
- gpio-controller;
- gpio-count = <100>;
- gpio-bank-name="soc";
- #gpio-cells = <2>;
- bootph-all;
- };
-
- blsp1_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
- clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>;
- bit-rate = <0xFF>;
- status = "disabled";
- bootph-all;
- };
-
- blsp1_spi1: spi@78b5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x78b5000 0x600>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- bootph-all;
- };
-
- mdio: mdio@90000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "qcom,ipq4019-mdio";
- reg = <0x90000 0x64>;
- status = "disabled";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
-
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
-
- ethphy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
- reg = <0x9a000 0x800>;
- reg-names = "phy_base";
- resets = <&gcc USB3_UNIPHY_PHY_ARES>;
- reset-names = "por_rst";
- status = "disabled";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- compatible = "qcom,usb-hs-ipq4019-phy";
- #phy-cells = <0>;
- reg = <0xa6000 0x40>;
- reg-names = "phy_base";
- resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
- reset-names = "por_rst", "srif_rst";
- status = "disabled";
- };
-
- usb3: usb3@8af8800 {
- compatible = "qcom,dwc3";
- reg = <0x8af8800 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc GCC_USB3_MASTER_CLK>,
- <&gcc GCC_USB3_SLEEP_CLK>,
- <&gcc GCC_USB3_MOCK_UTMI_CLK>;
- clock-names = "master", "sleep", "mock_utmi";
- ranges;
- status = "disabled";
-
- dwc3@8a00000 {
- compatible = "snps,dwc3";
- reg = <0x8a00000 0xf8000>;
- phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- maximum-speed = "super-speed";
- snps,dis_u2_susphy_quirk;
- };
- };
-
- usb2_hs_phy: hsphy@a8000 {
- compatible = "qcom,usb-hs-ipq4019-phy";
- #phy-cells = <0>;
- reg = <0xa8000 0x40>;
- reg-names = "phy_base";
- resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
- reset-names = "por_rst", "srif_rst";
- status = "disabled";
- };
-
- usb2: usb2@60f8800 {
- compatible = "qcom,dwc3";
- reg = <0x60f8800 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc GCC_USB2_MASTER_CLK>,
- <&gcc GCC_USB2_SLEEP_CLK>,
- <&gcc GCC_USB2_MOCK_UTMI_CLK>;
- clock-names = "master", "sleep", "mock_utmi";
- ranges;
- status = "disabled";
-
- dwc3@6000000 {
- compatible = "snps,dwc3";
- reg = <0x6000000 0xf8000>;
- phys = <&usb2_hs_phy>;
- phy-names = "usb2-phy";
- dr_mode = "host";
- maximum-speed = "high-speed";
- snps,dis_u2_susphy_quirk;
- };
- };
- };
-};
--
2.45.0
next prev parent reply other threads:[~2024-05-14 10:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 10:17 [PATCH v2 1/3] mach-ipq40xx: add CPU specific code Robert Marko
2024-05-14 10:17 ` [PATCH v2 2/3] mach-ipq40xx: use OF_UPSTREAM Robert Marko
2024-05-14 10:17 ` Robert Marko [this message]
2024-05-20 15:04 ` [PATCH v2 1/3] mach-ipq40xx: add CPU specific code Caleb Connolly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240514101824.23872-3-robert.marko@sartura.hr \
--to=robert.marko@sartura.hr \
--cc=caleb.connolly@linaro.org \
--cc=j.beck@linefinity.com \
--cc=neil.armstrong@linaro.org \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot-qcom@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).