From: Jaehoon Chung <jh80.chung@samsung.com>
To: Jonas Karlman <jonas@kwiboo.se>, Peng Fan <peng.fan@nxp.com>,
Tom Rini <trini@konsulko.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Simon Glass <sjg@chromium.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
Kever Yang <kever.yang@rock-chips.com>
Cc: Ferass El Hafidi <vitali64pmemail@protonmail.com>,
u-boot@lists.denx.de, u-boot-amlogic@groups.io
Subject: Re: [PATCH v2] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL
Date: Wed, 3 Apr 2024 09:02:22 +0900 [thread overview]
Message-ID: <ac386b15-e7fe-41b5-8be4-6fd1a5d5dc36@samsung.com> (raw)
In-Reply-To: <20240127171237.320834-1-jonas@kwiboo.se>
On 1/28/24 02:12, Jonas Karlman wrote:
> With MMC_PWRSEQ enabled the following link issue may happen when
> building SPL and SPL_PWRSEQ is not enabled.
>
> aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function `meson_mmc_probe':
> drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
>
> Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
> pwrseq support in SPL.
>
> Also add depends on DM_GPIO to fix following link issue:
>
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function `mmc_pwrseq_set_power':
> drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference to `dm_gpio_set_value'
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference to `dm_gpio_set_value'
>
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Acked-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Applied to u-boot-mmc/master, thanks! Sorry for late.
Best Regards,
Jaehoon Chung
> ---
> Changes in v2:
> - Fix Ths typo
> - Collect r-b and a-b tags
>
> Link to v1: https://patchwork.ozlabs.org/patch/1839392/
> ---
> drivers/mmc/Kconfig | 12 ++++++++++--
> drivers/mmc/Makefile | 2 +-
> drivers/mmc/meson_gx_mmc.c | 2 +-
> drivers/mmc/rockchip_dw_mmc.c | 2 +-
> include/mmc.h | 4 ++--
> 5 files changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 17618c3bdcc1..a141007a576f 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -20,11 +20,19 @@ config MMC_WRITE
>
> config MMC_PWRSEQ
> bool "HW reset support for eMMC"
> - depends on PWRSEQ
> + depends on PWRSEQ && DM_GPIO
> help
> - Ths select Hardware reset support aka pwrseq-emmc for eMMC
> + This select Hardware reset support aka pwrseq-emmc for eMMC
> devices.
>
> +config SPL_MMC_PWRSEQ
> + bool "HW reset support for eMMC in SPL"
> + depends on SPL_PWRSEQ && SPL_DM_GPIO
> + default y if MMC_PWRSEQ
> + help
> + This select Hardware reset support aka pwrseq-emmc for eMMC
> + devices in SPL.
> +
> config MMC_BROKEN_CD
> bool "Poll for broken card detection case"
> help
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index e9cf1fcc6400..2b94cc2f1c34 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
> endif
>
> obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
> -obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
> +obj-$(CONFIG_$(SPL_)MMC_PWRSEQ) += mmc-pwrseq.o
> obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
>
> ifndef CONFIG_$(SPL_)BLK
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> index fcf4f03d1e24..0825c0a2a838 100644
> --- a/drivers/mmc/meson_gx_mmc.c
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -288,7 +288,7 @@ static int meson_mmc_probe(struct udevice *dev)
>
> mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /* Enable power if needed */
> ret = mmc_pwrseq_get_power(dev, cfg);
> if (!ret) {
> diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
> index 72c820ee6330..ad4529d6afa8 100644
> --- a/drivers/mmc/rockchip_dw_mmc.c
> +++ b/drivers/mmc/rockchip_dw_mmc.c
> @@ -145,7 +145,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
>
> host->fifo_mode = priv->fifo_mode;
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /* Enable power if needed */
> ret = mmc_pwrseq_get_power(dev, &plat->cfg);
> if (!ret) {
> diff --git a/include/mmc.h b/include/mmc.h
> index 1022db3ffa7c..9aef31ea5deb 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -590,7 +590,7 @@ struct mmc_config {
> uint f_max;
> uint b_max;
> unsigned char part_type;
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> struct udevice *pwr_dev;
> #endif
> };
> @@ -808,7 +808,7 @@ int mmc_deinit(struct mmc *mmc);
> */
> int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /**
> * mmc_pwrseq_get_power() - get a power device from device tree
> *
prev parent reply other threads:[~2024-04-09 15:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-27 17:12 [PATCH v2] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL Jonas Karlman
[not found] ` <CGME20240403000223epcas1p14279f53844b770f4f1b402e9309e100e@epcas1p1.samsung.com>
2024-04-03 0:02 ` Jaehoon Chung [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ac386b15-e7fe-41b5-8be4-6fd1a5d5dc36@samsung.com \
--to=jh80.chung@samsung.com \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=neil.armstrong@linaro.org \
--cc=peng.fan@nxp.com \
--cc=philipp.tomsich@vrull.eu \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
--cc=vitali64pmemail@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).