From: Jiandi An <anjiandi@codeaurora.org>
To: tpmdd-devel@lists.sourceforge.net
Cc: peterhuewe@gmx.de, tpmdd@selhorst.net,
jarkko.sakkinen@linux.intel.com, jgunthorpe@obsidianresearch.com,
linux-kernel@vger.kernel.org, anjiandi@codeaurora.org
Subject: [PATCH] tpm/tpm_crb: Access locality for only CRB_START method
Date: Sun, 6 Aug 2017 21:54:15 -0500 [thread overview]
Message-ID: <1502074455-4867-1-git-send-email-anjiandi@codeaurora.org> (raw)
For ARM64, the locality is handled by Trust Zone in FW.
The layout does not have crb_regs_head. It is hitting
the following line.
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
Current code excludes CRB_FL_ACPI_START and when
CRB_FL_CRB_SMC_START is added around the same time
locality support is added, it should also be excluded.
Change the if condition to be only for CRB_FL_CRB_START.
For goIdle and cmdReady where code was excluding
CRB_FL_ACPI_START only (do nothing for ACPI start method),
CRB_FL_CRB_SMC_START was also excluded as ARM64 SMC start
method does not have TPM_CRB_CTRL_REQ.
Change the if condition to be only for CRB_FL_CRB_START
in crb_go_idle() and crb_cmd_ready().
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
---
drivers/char/tpm/tpm_crb.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 8f0a98d..d583c50 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -128,14 +128,14 @@ struct tpm2_crb_smc {
* Anyhow, we do not wait here as a consequent CMD_READY request
* will be handled correctly even if idle was not completed.
*
- * The function does nothing for devices with ACPI-start method.
+ * The function does nothing for devices with ACPI-start method
+ * and SMC-start method.
*
* Return: 0 always
*/
static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
{
- if ((priv->flags & CRB_FL_ACPI_START) ||
- (priv->flags & CRB_FL_CRB_SMC_START))
+ if (!(priv->flags & CRB_FL_CRB_START))
return 0;
iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
@@ -174,14 +174,14 @@ static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value,
* The device should respond within TIMEOUT_C.
*
* The function does nothing for devices with ACPI-start method
+ * and SMC-start method.
*
* Return: 0 on success -ETIME on timeout;
*/
static int __maybe_unused crb_cmd_ready(struct device *dev,
struct crb_priv *priv)
{
- if ((priv->flags & CRB_FL_ACPI_START) ||
- (priv->flags & CRB_FL_CRB_SMC_START))
+ if (!(priv->flags & CRB_FL_CRB_START))
return 0;
iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
@@ -458,7 +458,7 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
* the control area, as one nice sane region except for some older
* stuff that puts the control area outside the ACPI IO region.
*/
- if (!(priv->flags & CRB_FL_ACPI_START)) {
+ if (priv->flags & CRB_FL_CRB_START) {
if (buf->control_address == io_res.start +
sizeof(*priv->regs_h))
priv->regs_h = priv->iobase;
--
Jiandi An
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next reply other threads:[~2017-08-07 2:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-07 2:54 Jiandi An [this message]
2017-08-08 22:36 ` [PATCH] tpm/tpm_crb: Access locality for only CRB_START method Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502074455-4867-1-git-send-email-anjiandi@codeaurora.org \
--to=anjiandi@codeaurora.org \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).