From: <gregkh@linuxfoundation.org>
To: hdegoede@redhat.com,Jonathan.Cameron@huawei.com,Stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] iio: accel: mxc4005: Reset chip on probe() and resume()" failed to apply to 6.1-stable tree
Date: Mon, 13 May 2024 15:48:22 +0200 [thread overview]
Message-ID: <2024051321-finishing-applause-7489@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 6b8cffdc4a31e4a72f75ecd1bc13fbf0dafee390
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024051321-finishing-applause-7489@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
6b8cffdc4a31 ("iio: accel: mxc4005: Reset chip on probe() and resume()")
57a1592784d6 ("iio: accel: mxc4005: Interrupt handling fixes")
4d7c16d08d24 ("iio: accel: mxc4005: allow module autoloading via OF compatible")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6b8cffdc4a31e4a72f75ecd1bc13fbf0dafee390 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 26 Mar 2024 12:37:00 +0100
Subject: [PATCH] iio: accel: mxc4005: Reset chip on probe() and resume()
On some designs the chip is not properly reset when powered up at boot or
after a suspend/resume cycle.
Use the sw-reset feature to ensure that the chip is in a clean state
after probe() / resume() and in the case of resume() restore the settings
(scale, trigger-enabled).
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index 111f4bcf24ad..63c3566a533b 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -5,6 +5,7 @@
* Copyright (c) 2014, Intel Corporation.
*/
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
@@ -36,6 +37,7 @@
#define MXC4005_REG_INT_CLR1 0x01
#define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01
+#define MXC4005_REG_INT_CLR1_SW_RST 0x10
#define MXC4005_REG_CONTROL 0x0D
#define MXC4005_REG_CONTROL_MASK_FSR GENMASK(6, 5)
@@ -43,6 +45,9 @@
#define MXC4005_REG_DEVICE_ID 0x0E
+/* Datasheet does not specify a reset time, this is a conservative guess */
+#define MXC4005_RESET_TIME_US 2000
+
enum mxc4005_axis {
AXIS_X,
AXIS_Y,
@@ -66,6 +71,8 @@ struct mxc4005_data {
s64 timestamp __aligned(8);
} scan;
bool trigger_enabled;
+ unsigned int control;
+ unsigned int int_mask1;
};
/*
@@ -349,6 +356,7 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig,
return ret;
}
+ data->int_mask1 = val;
data->trigger_enabled = state;
mutex_unlock(&data->mutex);
@@ -384,6 +392,13 @@ static int mxc4005_chip_init(struct mxc4005_data *data)
dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg);
+ ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
+ MXC4005_REG_INT_CLR1_SW_RST);
+ if (ret < 0)
+ return dev_err_probe(data->dev, ret, "resetting chip\n");
+
+ fsleep(MXC4005_RESET_TIME_US);
+
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
if (ret < 0)
return dev_err_probe(data->dev, ret, "writing INT_MASK0\n");
@@ -479,6 +494,58 @@ static int mxc4005_probe(struct i2c_client *client)
return devm_iio_device_register(&client->dev, indio_dev);
}
+static int mxc4005_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct mxc4005_data *data = iio_priv(indio_dev);
+ int ret;
+
+ /* Save control to restore it on resume */
+ ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, &data->control);
+ if (ret < 0)
+ dev_err(data->dev, "failed to read reg_control\n");
+
+ return ret;
+}
+
+static int mxc4005_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct mxc4005_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
+ MXC4005_REG_INT_CLR1_SW_RST);
+ if (ret) {
+ dev_err(data->dev, "failed to reset chip: %d\n", ret);
+ return ret;
+ }
+
+ fsleep(MXC4005_RESET_TIME_US);
+
+ ret = regmap_write(data->regmap, MXC4005_REG_CONTROL, data->control);
+ if (ret) {
+ dev_err(data->dev, "failed to restore control register\n");
+ return ret;
+ }
+
+ ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
+ if (ret) {
+ dev_err(data->dev, "failed to restore interrupt 0 mask\n");
+ return ret;
+ }
+
+ ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, data->int_mask1);
+ if (ret) {
+ dev_err(data->dev, "failed to restore interrupt 1 mask\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(mxc4005_pm_ops, mxc4005_suspend, mxc4005_resume);
+
static const struct acpi_device_id mxc4005_acpi_match[] = {
{"MXC4005", 0},
{"MXC6655", 0},
@@ -506,6 +573,7 @@ static struct i2c_driver mxc4005_driver = {
.name = MXC4005_DRV_NAME,
.acpi_match_table = mxc4005_acpi_match,
.of_match_table = mxc4005_of_match,
+ .pm = pm_sleep_ptr(&mxc4005_pm_ops),
},
.probe = mxc4005_probe,
.id_table = mxc4005_id,
reply other threads:[~2024-05-13 13:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024051321-finishing-applause-7489@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Stable@vger.kernel.org \
--cc=hdegoede@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).