From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-coco@lists.linux.dev, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCHv4 3/4] x86/tdx: Dynamically disable SEPT violations from causing #VEs
Date: Sun, 12 May 2024 15:21:53 +0300 [thread overview]
Message-ID: <20240512122154.2655269-4-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20240512122154.2655269-1-kirill.shutemov@linux.intel.com>
Memory access #VE's are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VE's so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is "send nasty #VE's", the kernel can dynamically request
that they be disabled.
Check if the feature is available and disable SEPT #VE if possible.
If the TD allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 373e715e31bf ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Cc: stable@vger.kernel.org
---
arch/x86/coco/tdx/tdx.c | 88 +++++++++++++++++++++++++------
arch/x86/include/asm/shared/tdx.h | 11 +++-
2 files changed, 83 insertions(+), 16 deletions(-)
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index 1ff571cb9177..ba37f4306f4e 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -77,6 +77,20 @@ static inline void tdcall(u64 fn, struct tdx_module_args *args)
panic("TDCALL %lld failed (Buggy TDX module!)\n", fn);
}
+/* Read TD-scoped metadata */
+static inline u64 tdg_vm_rd(u64 field, u64 *value)
+{
+ struct tdx_module_args args = {
+ .rdx = field,
+ };
+ u64 ret;
+
+ ret = __tdcall_ret(TDG_VM_RD, &args);
+ *value = args.r8;
+
+ return ret;
+}
+
/* Write TD-scoped metadata */
static inline u64 tdg_vm_wr(u64 field, u64 value, u64 mask)
{
@@ -179,6 +193,62 @@ static void __noreturn tdx_panic(const char *msg)
__tdx_hypercall(&args);
}
+/*
+ * The kernel cannot handle #VEs when accessing normal kernel memory. Ensure
+ * that no #VE will be delivered for accesses to TD-private memory.
+ *
+ * TDX 1.0 does not allow the guest to disable SEPT #VE on its own. The VMM
+ * controls if the guest will receive such #VE with TD attribute
+ * ATTR_SEPT_VE_DISABLE.
+ *
+ * Newer TDX module allows the guest to control if it wants to receive SEPT
+ * violation #VEs.
+ *
+ * Check if the feature is available and disable SEPT #VE if possible.
+ *
+ * If the TD allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
+ * attribute is no longer reliable. It reflects the initial state of the
+ * control for the TD, but it will not be updated if someone (e.g. bootloader)
+ * changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
+ * determine if SEPT #VEs are enabled or disabled.
+ */
+static void disable_sept_ve(u64 td_attr)
+{
+ const char *msg = "TD misconfiguration: SEPT #VE has to be disabled";
+ bool debug = td_attr & ATTR_DEBUG;
+ u64 config, controls;
+
+ /* Is this TD allowed to disable SEPT #VE */
+ tdg_vm_rd(TDCS_CONFIG_FLAGS, &config);
+ if (!(config & TDCS_CONFIG_FLEXIBLE_PENDING_VE)) {
+ /* No SEPT #VE controls for the guest: check the attribute */
+ if (td_attr & ATTR_SEPT_VE_DISABLE)
+ return;
+
+ /* Relax SEPT_VE_DISABLE check for debug TD for backtraces */
+ if (debug)
+ pr_warn("%s\n", msg);
+ else
+ tdx_panic(msg);
+ return;
+ }
+
+ /* Check if SEPT #VE has been disabled before us */
+ tdg_vm_rd(TDCS_TD_CTLS, &controls);
+ if (controls & TD_CTLS_PENDING_VE_DISABLE)
+ return;
+
+ /* Keep #VEs enabled for splats in debugging environments */
+ if (debug)
+ return;
+
+ /* Disable SEPT #VEs */
+ tdg_vm_wr(TDCS_TD_CTLS, TD_CTLS_PENDING_VE_DISABLE,
+ TD_CTLS_PENDING_VE_DISABLE);
+
+ return;
+}
+
static void tdx_setup(u64 *cc_mask)
{
struct tdx_module_args args = {};
@@ -204,24 +274,12 @@ static void tdx_setup(u64 *cc_mask)
gpa_width = args.rcx & GENMASK(5, 0);
*cc_mask = BIT_ULL(gpa_width - 1);
+ td_attr = args.rdx;
+
/* Kernel does not use NOTIFY_ENABLES and does not need random #VEs */
tdg_vm_wr(TDCS_NOTIFY_ENABLES, 0, -1ULL);
- /*
- * The kernel can not handle #VE's when accessing normal kernel
- * memory. Ensure that no #VE will be delivered for accesses to
- * TD-private memory. Only VMM-shared memory (MMIO) will #VE.
- */
- td_attr = args.rdx;
- if (!(td_attr & ATTR_SEPT_VE_DISABLE)) {
- const char *msg = "TD misconfiguration: SEPT_VE_DISABLE attribute must be set.";
-
- /* Relax SEPT_VE_DISABLE check for debug TD. */
- if (td_attr & ATTR_DEBUG)
- pr_warn("%s\n", msg);
- else
- tdx_panic(msg);
- }
+ disable_sept_ve(td_attr);
}
/*
diff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h
index fdfd41511b02..fecb2a6e864b 100644
--- a/arch/x86/include/asm/shared/tdx.h
+++ b/arch/x86/include/asm/shared/tdx.h
@@ -16,11 +16,20 @@
#define TDG_VP_VEINFO_GET 3
#define TDG_MR_REPORT 4
#define TDG_MEM_PAGE_ACCEPT 6
+#define TDG_VM_RD 7
#define TDG_VM_WR 8
-/* TDCS fields. To be used by TDG.VM.WR and TDG.VM.RD module calls */
+/* TDX TD-Scope Metadata. To be used by TDG.VM.WR and TDG.VM.RD */
+#define TDCS_CONFIG_FLAGS 0x1110000300000016
+#define TDCS_TD_CTLS 0x1110000300000017
#define TDCS_NOTIFY_ENABLES 0x9100000000000010
+/* TDCS_CONFIG_FLAGS bits */
+#define TDCS_CONFIG_FLEXIBLE_PENDING_VE BIT_ULL(1)
+
+/* TDCS_TD_CTLS bits */
+#define TD_CTLS_PENDING_VE_DISABLE BIT_ULL(0)
+
/* TDX hypercall Leaf IDs */
#define TDVMCALL_MAP_GPA 0x10001
#define TDVMCALL_GET_QUOTE 0x10002
--
2.43.0
next prev parent reply other threads:[~2024-05-12 12:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240512122154.2655269-1-kirill.shutemov@linux.intel.com>
2024-05-12 12:21 ` [PATCHv4 1/4] x86/tdx: Factor out TD metadata write TDCALL Kirill A. Shutemov
2024-05-12 12:21 ` [PATCHv4 2/4] x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() Kirill A. Shutemov
2024-05-12 12:21 ` Kirill A. Shutemov [this message]
2024-05-14 14:56 ` [PATCHv4 3/4] x86/tdx: Dynamically disable SEPT violations from causing #VEs Nikolay Borisov
2024-05-15 9:30 ` Kirill A. Shutemov
2024-05-15 13:14 ` Nikolay Borisov
2024-05-15 13:22 ` Kirill A. Shutemov
2024-05-15 13:53 ` Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240512122154.2655269-4-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).