From: Peter Schneider <pschneider1968@googlemail.com>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, stable@vger.kernel.org,
linux-kernel@vger.kernel.org, regressions@leemhuis.info,
regressions@lists.linux.dev
Subject: Re: Kernel 6.8.4 regression: aacraid controller not initialized any more, system boot hangs
Date: Thu, 9 May 2024 04:12:36 +0200 [thread overview]
Message-ID: <5c354987-e373-4d6c-aa55-4030f1a31503@googlemail.com> (raw)
In-Reply-To: <yq1cypvwz5o.fsf@ca-mkp.ca.oracle.com>
[-- Attachment #1.1: Type: text/plain, Size: 3103 bytes --]
Hi Martin,
Am 09.05.2024 um 03:38 schrieb Martin K. Petersen:
>
> Hi Peter!
>
> Thanks for the detailed bug report.
Thanks that you are looking into the issue! I thought I'd be also CC'ing the relevant
regressions tracker+mailing list. For reference, my original message can be found here:
https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/
[...]
> Can you please send me the output of:
>
> # sg_vpd -a /dev/sda
> # sg_readcap -l /dev/sda
>
> where sda is one of the aacraid volumes.
Here you go... sda is the 1TiB RAID1 array, sdb is the 5TiB RAID5 array.
root@linus:~# uname -r
6.5.13-5-pve
root@linus:~# sg_vpd -a /dev/sda
Supported VPD pages VPD page:
Supported VPD pages [sv]
Unit serial number [sn]
Device identification [di]
Unit serial number VPD page:
Unit serial number: 50C0B82D
Device Identification VPD page:
Addressed logical unit:
designator type: T10 vendor identification, code set: ASCII
vendor id: ADAPTEC
vendor specific: ARRAY 50C0B82D
designator type: EUI-64 based, code set: Binary
0x2db8c05000d00000
root@linus:~# sg_readcap -l /dev/sda
Read Capacity results:
Protection: prot_en=0, p_type=0, p_i_exponent=0
Logical block provisioning: lbpme=0, lbprz=0
Last LBA=1998565375 (0x771fafff), Number of logical blocks=1998565376
Logical block length=512 bytes
Logical blocks per physical block exponent=0
Lowest aligned LBA=0
Hence:
Device size: 1023265472512 bytes, 975862.0 MiB, 1023.27 GB
root@linus:~# sg_vpd -a /dev/sdb
Supported VPD pages VPD page:
Supported VPD pages [sv]
Unit serial number [sn]
Device identification [di]
Unit serial number VPD page:
Unit serial number: 8718162D
Device Identification VPD page:
Addressed logical unit:
designator type: T10 vendor identification, code set: ASCII
vendor id: ADAPTEC
vendor specific: ARRAY 8718162D
designator type: EUI-64 based, code set: Binary
0x2d16188700d00000
root@linus:~# sg_readcap -l /dev/sdb
Read Capacity results:
Protection: prot_en=0, p_type=0, p_i_exponent=0
Logical block provisioning: lbpme=0, lbprz=0
Last LBA=9762222079 (0x245dfafff), Number of logical blocks=9762222080
Logical block length=512 bytes
Logical blocks per physical block exponent=0
Lowest aligned LBA=0
Hence:
Device size: 4998257704960 bytes, 4766710.0 MiB, 4998.26 GB, 5.00 TB
Beste Grüße,
Peter Schneider
--
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you. -- David McCullough Jr.
OpenPGP: 0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]
next parent reply other threads:[~2024-05-09 2:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com>
[not found] ` <yq1cypvwz5o.fsf@ca-mkp.ca.oracle.com>
2024-05-09 2:12 ` Peter Schneider [this message]
2024-05-09 4:18 ` Kernel 6.8.4 regression: aacraid controller not initialized any more, system boot hangs Peter Schneider
2024-05-14 7:07 ` Peter Schneider
2024-05-14 12:54 ` Martin K. Petersen
2024-05-14 13:23 ` Peter Schneider
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5c354987-e373-4d6c-aa55-4030f1a31503@googlemail.com \
--to=pschneider1968@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=regressions@leemhuis.info \
--cc=regressions@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).