From: "Cédric Le Goater" <clg@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Xu" <peterx@redhat.com>, "Fabiano Rosas" <farosas@suse.de>,
"Alex Williamson" <alex.williamson@redhat.com>,
"Avihai Horon" <avihaih@nvidia.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Markus Armbruster" <armbru@redhat.com>,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PATCH v5 04/10] vfio: Use new Error** argument in vfio_save_setup()
Date: Mon, 6 May 2024 11:20:47 +0200 [thread overview]
Message-ID: <20240506092053.388578-5-clg@redhat.com> (raw)
In-Reply-To: <20240506092053.388578-1-clg@redhat.com>
Add an Error** argument to vfio_migration_set_state() and adjust
callers, including vfio_save_setup(). The error will be propagated up
to qemu_savevm_state_setup() where the save_setup() handler is
executed.
Modify vfio_vmstate_change_prepare() and vfio_vmstate_change() to
store a reported error under the migration stream if a migration is in
progress.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
---
Changes in v5:
- Replaced error_setg() by error_setg_errno() in vfio_migration_set_state()
- Rebased on 20c64c8a51a4 ("migration: migration_file_set_error")
hw/vfio/migration.c | 76 +++++++++++++++++++++++++--------------------
1 file changed, 43 insertions(+), 33 deletions(-)
diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
index bf2fd0759ba6e4fb103cc5c1a43edb180a3d0de4..9b6375c949f7a8dca857ead2506855f63fa051e4 100644
--- a/hw/vfio/migration.c
+++ b/hw/vfio/migration.c
@@ -82,7 +82,8 @@ static const char *mig_state_to_str(enum vfio_device_mig_state state)
static int vfio_migration_set_state(VFIODevice *vbasedev,
enum vfio_device_mig_state new_state,
- enum vfio_device_mig_state recover_state)
+ enum vfio_device_mig_state recover_state,
+ Error **errp)
{
VFIOMigration *migration = vbasedev->migration;
uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) +
@@ -102,25 +103,26 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
ret = -errno;
if (recover_state == VFIO_DEVICE_STATE_ERROR) {
- error_report("%s: Failed setting device state to %s, err: %s. "
- "Recover state is ERROR. Resetting device",
- vbasedev->name, mig_state_to_str(new_state),
- strerror(errno));
+ error_setg_errno(errp, errno,
+ "%s: Failed setting device state to %s. "
+ "Recover state is ERROR. Resetting device",
+ vbasedev->name, mig_state_to_str(new_state));
goto reset_device;
}
- error_report(
- "%s: Failed setting device state to %s, err: %s. Setting device in recover state %s",
- vbasedev->name, mig_state_to_str(new_state),
- strerror(errno), mig_state_to_str(recover_state));
+ error_setg_errno(errp, errno,
+ "%s: Failed setting device state to %s. "
+ "Setting device in recover state %s",
+ vbasedev->name, mig_state_to_str(new_state),
+ mig_state_to_str(recover_state));
mig_state->device_state = recover_state;
if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) {
ret = -errno;
- error_report(
- "%s: Failed setting device in recover state, err: %s. Resetting device",
- vbasedev->name, strerror(errno));
+ error_setg_errno(errp, errno,
+ "%s: Failed setting device in recover state. "
+ "Resetting device", vbasedev->name);
goto reset_device;
}
@@ -137,7 +139,7 @@ static int vfio_migration_set_state(VFIODevice *vbasedev,
* This can happen if the device is asynchronously reset and
* terminates a data transfer.
*/
- error_report("%s: data_fd out of sync", vbasedev->name);
+ error_setg(errp, "%s: data_fd out of sync", vbasedev->name);
close(mig_state->data_fd);
return -EBADF;
@@ -168,10 +170,11 @@ reset_device:
*/
static int
vfio_migration_set_state_or_reset(VFIODevice *vbasedev,
- enum vfio_device_mig_state new_state)
+ enum vfio_device_mig_state new_state,
+ Error **errp)
{
return vfio_migration_set_state(vbasedev, new_state,
- VFIO_DEVICE_STATE_ERROR);
+ VFIO_DEVICE_STATE_ERROR, errp);
}
static int vfio_load_buffer(QEMUFile *f, VFIODevice *vbasedev,
@@ -399,10 +402,8 @@ static int vfio_save_setup(QEMUFile *f, void *opaque, Error **errp)
switch (migration->device_state) {
case VFIO_DEVICE_STATE_RUNNING:
ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_PRE_COPY,
- VFIO_DEVICE_STATE_RUNNING);
+ VFIO_DEVICE_STATE_RUNNING, errp);
if (ret) {
- error_setg(errp, "%s: Failed to set new PRE_COPY state",
- vbasedev->name);
return ret;
}
@@ -435,13 +436,20 @@ static void vfio_save_cleanup(void *opaque)
{
VFIODevice *vbasedev = opaque;
VFIOMigration *migration = vbasedev->migration;
+ Error *local_err = NULL;
+ int ret;
/*
* Changing device state from STOP_COPY to STOP can take time. Do it here,
* after migration has completed, so it won't increase downtime.
*/
if (migration->device_state == VFIO_DEVICE_STATE_STOP_COPY) {
- vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_STOP);
+ ret = vfio_migration_set_state_or_reset(vbasedev,
+ VFIO_DEVICE_STATE_STOP,
+ &local_err);
+ if (ret) {
+ error_report_err(local_err);
+ }
}
g_free(migration->data_buffer);
@@ -549,11 +557,13 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
VFIODevice *vbasedev = opaque;
ssize_t data_size;
int ret;
+ Error *local_err = NULL;
/* We reach here with device state STOP or STOP_COPY only */
ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_STOP_COPY,
- VFIO_DEVICE_STATE_STOP);
+ VFIO_DEVICE_STATE_STOP, &local_err);
if (ret) {
+ error_report_err(local_err);
return ret;
}
@@ -591,14 +601,9 @@ static void vfio_save_state(QEMUFile *f, void *opaque)
static int vfio_load_setup(QEMUFile *f, void *opaque, Error **errp)
{
VFIODevice *vbasedev = opaque;
- int ret;
- ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING,
- vbasedev->migration->device_state);
- if (ret) {
- error_setg(errp, "%s: Failed to set RESUMING state", vbasedev->name);
- }
- return ret;
+ return vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING,
+ vbasedev->migration->device_state, errp);
}
static int vfio_load_cleanup(void *opaque)
@@ -714,19 +719,20 @@ static void vfio_vmstate_change_prepare(void *opaque, bool running,
VFIODevice *vbasedev = opaque;
VFIOMigration *migration = vbasedev->migration;
enum vfio_device_mig_state new_state;
+ Error *local_err = NULL;
int ret;
new_state = migration->device_state == VFIO_DEVICE_STATE_PRE_COPY ?
VFIO_DEVICE_STATE_PRE_COPY_P2P :
VFIO_DEVICE_STATE_RUNNING_P2P;
- ret = vfio_migration_set_state_or_reset(vbasedev, new_state);
+ ret = vfio_migration_set_state_or_reset(vbasedev, new_state, &local_err);
if (ret) {
/*
* Migration should be aborted in this case, but vm_state_notify()
* currently does not support reporting failures.
*/
- migration_file_set_error(ret, NULL);
+ migration_file_set_error(ret, local_err);
}
trace_vfio_vmstate_change_prepare(vbasedev->name, running,
@@ -738,6 +744,7 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
{
VFIODevice *vbasedev = opaque;
enum vfio_device_mig_state new_state;
+ Error *local_err = NULL;
int ret;
if (running) {
@@ -750,13 +757,13 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
VFIO_DEVICE_STATE_STOP;
}
- ret = vfio_migration_set_state_or_reset(vbasedev, new_state);
+ ret = vfio_migration_set_state_or_reset(vbasedev, new_state, &local_err);
if (ret) {
/*
* Migration should be aborted in this case, but vm_state_notify()
* currently does not support reporting failures.
*/
- migration_file_set_error(ret, NULL);
+ migration_file_set_error(ret, local_err);
}
trace_vfio_vmstate_change(vbasedev->name, running, RunState_str(state),
@@ -769,13 +776,16 @@ static int vfio_migration_state_notifier(NotifierWithReturn *notifier,
VFIOMigration *migration = container_of(notifier, VFIOMigration,
migration_state);
VFIODevice *vbasedev = migration->vbasedev;
+ int ret = 0;
trace_vfio_migration_state_notifier(vbasedev->name, e->type);
if (e->type == MIG_EVENT_PRECOPY_FAILED) {
- vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_RUNNING);
+ ret = vfio_migration_set_state_or_reset(vbasedev,
+ VFIO_DEVICE_STATE_RUNNING,
+ errp);
}
- return 0;
+ return ret;
}
static void vfio_migration_free(VFIODevice *vbasedev)
--
2.45.0
next prev parent reply other threads:[~2024-05-06 9:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 9:20 [PATCH v5 00/10] vfio: Improve error reporting (part 2) Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 01/10] vfio: Add Error** argument to .set_dirty_page_tracking() handler Cédric Le Goater
2024-05-13 13:03 ` Avihai Horon
2024-05-13 16:27 ` Cédric Le Goater
2024-05-15 12:17 ` Avihai Horon
2024-05-15 12:25 ` Cédric Le Goater
2024-05-15 12:29 ` Avihai Horon
2024-05-15 12:36 ` Cédric Le Goater
2024-05-15 12:49 ` Avihai Horon
2024-05-06 9:20 ` [PATCH v5 02/10] vfio: Add Error** argument to vfio_devices_dma_logging_start() Cédric Le Goater
2024-05-13 13:08 ` Avihai Horon
2024-05-13 16:49 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 03/10] vfio: Extend migration_file_set_error() with Error** argument Cédric Le Goater
2024-05-13 13:14 ` Avihai Horon
2024-05-13 16:51 ` Cédric Le Goater
2024-05-13 22:19 ` Fabiano Rosas
2024-05-06 9:20 ` Cédric Le Goater [this message]
2024-05-13 13:21 ` [PATCH v5 04/10] vfio: Use new Error** argument in vfio_save_setup() Avihai Horon
2024-05-14 7:57 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 05/10] vfio: Add Error** argument to .vfio_save_config() handler Cédric Le Goater
2024-05-13 13:30 ` Avihai Horon
2024-05-14 8:50 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 06/10] vfio: Reverse test on vfio_get_dirty_bitmap() Cédric Le Goater
2024-05-13 13:42 ` Avihai Horon
2024-05-14 8:55 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 07/10] memory: Add Error** argument to memory_get_xlat_addr() Cédric Le Goater
2024-05-13 13:44 ` Avihai Horon
2024-05-14 8:57 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 08/10] vfio: Add Error** argument to .get_dirty_bitmap() handler Cédric Le Goater
2024-05-13 13:51 ` Avihai Horon
2024-05-14 9:05 ` Cédric Le Goater
2024-05-06 9:20 ` [PATCH v5 09/10] vfio: Also trace event failures in vfio_save_complete_precopy() Cédric Le Goater
2024-05-13 13:54 ` Avihai Horon
2024-05-06 9:20 ` [PATCH v5 10/10] vfio: Extend vfio_set_migration_error() with Error* argument Cédric Le Goater
2024-05-13 14:26 ` Avihai Horon
2024-05-14 11:20 ` Cédric Le Goater
2024-05-14 14:35 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240506092053.388578-5-clg@redhat.com \
--to=clg@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=armbru@redhat.com \
--cc=avihaih@nvidia.com \
--cc=farosas@suse.de \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).