From: Yuan Liu <yuan1.liu@intel.com>
To: peterx@redhat.com, farosas@suse.de
Cc: qemu-devel@nongnu.org, yuan1.liu@intel.com, nanhai.zou@intel.com
Subject: [PATCH v6 1/7] docs/migration: add qpl compression feature
Date: Mon, 6 May 2024 00:57:45 +0800 [thread overview]
Message-ID: <20240505165751.2392198-2-yuan1.liu@intel.com> (raw)
In-Reply-To: <20240505165751.2392198-1-yuan1.liu@intel.com>
add Intel Query Processing Library (QPL) compression method
introduction
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
---
docs/devel/migration/features.rst | 1 +
docs/devel/migration/qpl-compression.rst | 262 +++++++++++++++++++++++
2 files changed, 263 insertions(+)
create mode 100644 docs/devel/migration/qpl-compression.rst
diff --git a/docs/devel/migration/features.rst b/docs/devel/migration/features.rst
index d5ca7b86d5..bc98b65075 100644
--- a/docs/devel/migration/features.rst
+++ b/docs/devel/migration/features.rst
@@ -12,3 +12,4 @@ Migration has plenty of features to support different use cases.
virtio
mapped-ram
CPR
+ qpl-compression
diff --git a/docs/devel/migration/qpl-compression.rst b/docs/devel/migration/qpl-compression.rst
new file mode 100644
index 0000000000..13fb7a67b1
--- /dev/null
+++ b/docs/devel/migration/qpl-compression.rst
@@ -0,0 +1,262 @@
+===============
+QPL Compression
+===============
+The Intel Query Processing Library (Intel ``QPL``) is an open-source library to
+provide compression and decompression features and it is based on deflate
+compression algorithm (RFC 1951).
+
+The ``QPL`` compression relies on Intel In-Memory Analytics Accelerator(``IAA``)
+and Shared Virtual Memory(``SVM``) technology, they are new features supported
+from Intel 4th Gen Intel Xeon Scalable processors, codenamed Sapphire Rapids
+processor(``SPR``).
+
+For more ``QPL`` introduction, please refer to `QPL Introduction
+<https://intel.github.io/qpl/documentation/introduction_docs/introduction.html>`_
+
+QPL Compression Framework
+=========================
+
+::
+
+ +----------------+ +------------------+
+ | MultiFD Thread | |accel-config tool |
+ +-------+--------+ +--------+---------+
+ | |
+ | |
+ |compress/decompress |
+ +-------+--------+ | Setup IAA
+ | QPL library | | Resources
+ +-------+---+----+ |
+ | | |
+ | +-------------+-------+
+ | Open IAA |
+ | Devices +-----+-----+
+ | |idxd driver|
+ | +-----+-----+
+ | |
+ | |
+ | +-----+-----+
+ +-----------+IAA Devices|
+ Submit jobs +-----------+
+ via enqcmd
+
+
+QPL Build And Installation
+--------------------------
+
+.. code-block:: shell
+
+ $git clone --recursive https://github.com/intel/qpl.git qpl
+ $mkdir qpl/build
+ $cd qpl/build
+ $cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr -DQPL_LIBRARY_TYPE=SHARED ..
+ $sudo cmake --build . --target install
+
+For more details about ``QPL`` installation, please refer to `QPL Installation
+<https://intel.github.io/qpl/documentation/get_started_docs/installation.html>`_
+
+IAA Device Management
+---------------------
+
+The number of ``IAA`` devices will vary depending on the Xeon product model.
+On a ``SPR`` server, there can be a maximum of 8 ``IAA`` devices, with up to
+4 devices per socket.
+
+By default, all ``IAA`` devices are disabled and need to be configured and
+enabled by users manually.
+
+Check the number of devices through the following command
+
+.. code-block:: shell
+
+ #lspci -d 8086:0cfe
+ 6a:02.0 System peripheral: Intel Corporation Device 0cfe
+ 6f:02.0 System peripheral: Intel Corporation Device 0cfe
+ 74:02.0 System peripheral: Intel Corporation Device 0cfe
+ 79:02.0 System peripheral: Intel Corporation Device 0cfe
+ e7:02.0 System peripheral: Intel Corporation Device 0cfe
+ ec:02.0 System peripheral: Intel Corporation Device 0cfe
+ f1:02.0 System peripheral: Intel Corporation Device 0cfe
+ f6:02.0 System peripheral: Intel Corporation Device 0cfe
+
+IAA Device Configuration And Enabling
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``accel-config`` tool is used to enable ``IAA`` devices and configure
+``IAA`` hardware resources(work queues and engines). One ``IAA`` device
+has 8 work queues and 8 processing engines, multiple engines can be assigned
+to a work queue via ``group`` attribute.
+
+For ``accel-config`` installation, please refer to `accel-config installation
+<https://github.com/intel/idxd-config>`_
+
+One example of configuring and enabling an ``IAA`` device.
+
+.. code-block:: shell
+
+ #accel-config config-engine iax1/engine1.0 -g 0
+ #accel-config config-engine iax1/engine1.1 -g 0
+ #accel-config config-engine iax1/engine1.2 -g 0
+ #accel-config config-engine iax1/engine1.3 -g 0
+ #accel-config config-engine iax1/engine1.4 -g 0
+ #accel-config config-engine iax1/engine1.5 -g 0
+ #accel-config config-engine iax1/engine1.6 -g 0
+ #accel-config config-engine iax1/engine1.7 -g 0
+ #accel-config config-wq iax1/wq1.0 -g 0 -s 128 -p 10 -b 1 -t 128 -m shared -y user -n app1 -d user
+ #accel-config enable-device iax1
+ #accel-config enable-wq iax1/wq1.0
+
+.. note::
+ IAX is an early name for IAA
+
+- The ``IAA`` device index is 1, use ``ls -lh /sys/bus/dsa/devices/iax*``
+ command to query the ``IAA`` device index.
+
+- 8 engines and 1 work queue are configured in group 0, so all compression jobs
+ submitted to this work queue can be processed by all engines at the same time.
+
+- Set work queue attributes including the work mode, work queue size and so on.
+
+- Enable the ``IAA1`` device and work queue 1.0
+
+.. note::
+
+ Set work queue mode to shared mode, since ``QPL`` library only supports
+ shared mode
+
+For more detailed configuration, please refer to `IAA Configuration Samples
+<https://github.com/intel/idxd-config/tree/stable/Documentation/accfg>`_
+
+IAA Unit Test
+^^^^^^^^^^^^^
+
+- Enabling ``IAA`` devices for Xeon platform, please refer to `IAA User Guide
+ <https://www.intel.com/content/www/us/en/content-details/780887/intel-in-memory-analytics-accelerator-intel-iaa.html>`_
+
+- ``IAA`` device driver is Intel Data Accelerator Driver (idxd), it is
+ recommended that the minimum version of Linux kernel is 5.18.
+
+- Add ``"intel_iommu=on,sm_on"`` parameter to kernel command line
+ for ``SVM`` feature enabling.
+
+Here is an easy way to verify ``IAA`` device driver and ``SVM`` with `iaa_test
+<https://github.com/intel/idxd-config/tree/stable/test>`_
+
+.. code-block:: shell
+
+ #./test/iaa_test
+ [ info] alloc wq 0 shared size 128 addr 0x7f26cebe5000 batch sz 0xfffffffe xfer sz 0x80000000
+ [ info] test noop: tflags 0x1 num_desc 1
+ [ info] preparing descriptor for noop
+ [ info] Submitted all noop jobs
+ [ info] verifying task result for 0x16f7e20
+ [ info] test with op 0 passed
+
+
+IAA Resources Allocation For Migration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There is no ``IAA`` resource configuration parameters for migration and
+``accel-config`` tool configuration cannot directly specify the ``IAA``
+resources used for migration.
+
+The multifd migration with ``QPL`` compression method will use all work
+queues that are enabled and shared mode.
+
+.. note::
+
+ Accessing IAA resources requires ``sudo`` command or ``root`` privileges
+ by default. Administrators can modify the IAA device node ownership
+ so that Qemu can use IAA with specified user permissions.
+
+ For example
+
+ #chown -R Qemu /dev/iax
+
+
+Shared Virtual Memory(SVM) Introduction
+=======================================
+
+An ability for an accelerator I/O device to operate in the same virtual
+memory space of applications on host processors. It also implies the
+ability to operate from pageable memory, avoiding functional requirements
+to pin memory for DMA operations.
+
+When using ``SVM`` technology, users do not need to reserve memory for the
+``IAA`` device and perform pin memory operation. The ``IAA`` device can
+directly access data using the virtual address of the process.
+
+For more ``SVM`` technology, please refer to
+`Shared Virtual Addressing (SVA) with ENQCMD
+<https://docs.kernel.org/next/x86/sva.html>`_
+
+
+How To Use QPL Compression In Migration
+=======================================
+
+1 - Installation of ``QPL`` library and ``accel-config`` library if using IAA
+
+2 - Configure and enable ``IAA`` devices and work queues via ``accel-config``
+
+3 - Build ``Qemu`` with ``--enable-qpl`` parameter
+
+ E.g. configure --target-list=x86_64-softmmu --enable-kvm ``--enable-qpl``
+
+4 - Enable ``QPL`` compression during migration
+
+ Set ``migrate_set_parameter multifd-compression qpl`` when migrating, the
+ ``QPL`` compression does not support configuring the compression level, it
+ only supports one compression level.
+
+The Difference Between QPL And ZLIB
+===================================
+
+Although both ``QPL`` and ``ZLIB`` are based on the deflate compression
+algorithm, and ``QPL`` can support the header and tail of ``ZLIB``, ``QPL``
+is still not fully compatible with the ``ZLIB`` compression in the migration.
+
+``QPL`` only supports 4K history buffer, and ``ZLIB`` is 32K by default. The
+``ZLIB`` compressed data that ``QPL`` may not decompress correctly and
+vice versa.
+
+``QPL`` does not support the ``Z_SYNC_FLUSH`` operation in ``ZLIB`` streaming
+compression, current ``ZLIB`` implementation uses ``Z_SYNC_FLUSH``, so each
+``multifd`` thread has a ``ZLIB`` streaming context, and all page compression
+and decompression are based on this stream. ``QPL`` cannot decompress such data
+and vice versa.
+
+The introduction for ``Z_SYNC_FLUSH``, please refer to `Zlib Manual
+<https://www.zlib.net/manual.html>`_
+
+The Best Practices
+==================
+When user enables the IAA device for ``QPL`` compression, it is recommended
+to add ``-mem-prealloc`` parameter to the destination boot parameters. This
+parameter can avoid the occurrence of I/O page fault and reduce the overhead
+of IAA compression and decompression.
+
+The example of booting with ``-mem-prealloc`` parameter
+
+.. code-block:: shell
+
+ $qemu-system-x86_64 --enable-kvm -cpu host --mem-prealloc ...
+
+
+An example about I/O page fault measurement of destination without
+``-mem-prealloc``, the ``svm_prq`` indicates the number of I/O page fault
+occurrences and processing time.
+
+.. code-block:: shell
+
+ #echo 1 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ #echo 2 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ #echo 3 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ #echo 4 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ #cat /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ IOMMU: dmar18 Register Base Address: c87fc000
+ <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms 1ms-10ms >=10ms min(us) max(us) average(us)
+ inv_iotlb 0 286 123 0 0 0 0 0 1 0
+ inv_devtlb 0 276 133 0 0 0 0 0 2 0
+ inv_iec 0 0 0 0 0 0 0 0 0 0
+ svm_prq 0 0 25206 364 395 0 0 1 556 9
+
--
2.39.3
next prev parent reply other threads:[~2024-05-06 8:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-05 16:57 [PATCH v6 0/7] Live Migration With IAA Yuan Liu
2024-05-05 16:57 ` Yuan Liu [this message]
2024-05-05 16:57 ` [PATCH v6 2/7] migration/multifd: put IOV initialization into compression method Yuan Liu
2024-05-10 20:21 ` Fabiano Rosas
2024-05-27 20:50 ` Peter Xu
2024-05-28 13:36 ` Liu, Yuan1
2024-05-28 15:32 ` Peter Xu
2024-05-05 16:57 ` [PATCH v6 3/7] configure: add --enable-qpl build option Yuan Liu
2024-05-05 16:57 ` [PATCH v6 4/7] migration/multifd: add qpl compression method Yuan Liu
2024-05-10 14:12 ` Fabiano Rosas
2024-05-10 14:23 ` Liu, Yuan1
2024-05-05 16:57 ` [PATCH v6 5/7] migration/multifd: implement initialization of qpl compression Yuan Liu
2024-05-10 20:45 ` Fabiano Rosas
2024-05-11 12:55 ` Liu, Yuan1
2024-05-10 20:52 ` Fabiano Rosas
2024-05-11 12:39 ` Liu, Yuan1
2024-05-05 16:57 ` [PATCH v6 6/7] migration/multifd: implement qpl compression and decompression Yuan Liu
2024-05-13 15:13 ` Fabiano Rosas
2024-05-14 6:30 ` Liu, Yuan1
2024-05-14 14:08 ` Fabiano Rosas
2024-05-15 6:36 ` Liu, Yuan1
2024-05-05 16:57 ` [PATCH v6 7/7] tests/migration-test: add qpl compression test Yuan Liu
2024-05-27 20:56 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240505165751.2392198-2-yuan1.liu@intel.com \
--to=yuan1.liu@intel.com \
--cc=farosas@suse.de \
--cc=nanhai.zou@intel.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).