From: Armin Wolf <W_Armin@gmx.de>
To: mlj@danelec.com, rafael.j.wysocki@intel.com, lenb@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Subject: [PATCH] ACPI: fan: Add hwmon support
Date: Mon, 8 Apr 2024 14:37:18 +0200 [thread overview]
Message-ID: <20240408123718.15512-1-W_Armin@gmx.de> (raw)
Currently, the driver does only supports a custom sysfs
interface to allow userspace to read the fan speed.
Add support for the standard hwmon interface so users
can read the fan speed with standard tools like "sensors".
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
drivers/acpi/Makefile | 1 +
drivers/acpi/fan.h | 2 ++
drivers/acpi/fan_core.c | 7 ++++
drivers/acpi/fan_hwmon.c | 78 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 88 insertions(+)
create mode 100644 drivers/acpi/fan_hwmon.c
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d69d5444acdb..9a2e03acc1be 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_ACPI_TINY_POWER_BUTTON) += tiny-power-button.o
obj-$(CONFIG_ACPI_FAN) += fan.o
fan-objs := fan_core.o
fan-objs += fan_attr.o
+fan-objs += fan_hwmon.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-$(CONFIG_ACPI_TAD) += acpi_tad.o
diff --git a/drivers/acpi/fan.h b/drivers/acpi/fan.h
index e7b4b4e4a55e..45c2637566da 100644
--- a/drivers/acpi/fan.h
+++ b/drivers/acpi/fan.h
@@ -56,4 +56,6 @@ struct acpi_fan {
int acpi_fan_get_fst(struct acpi_device *device, struct acpi_fan_fst *fst);
int acpi_fan_create_attributes(struct acpi_device *device);
void acpi_fan_delete_attributes(struct acpi_device *device);
+
+int devm_acpi_fan_create_hwmon(struct acpi_device *device);
#endif
diff --git a/drivers/acpi/fan_core.c b/drivers/acpi/fan_core.c
index ff72e4ef8738..6bbdbb914e95 100644
--- a/drivers/acpi/fan_core.c
+++ b/drivers/acpi/fan_core.c
@@ -7,6 +7,7 @@
* Copyright (C) 2022 Intel Corporation. All rights reserved.
*/
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -336,6 +337,12 @@ static int acpi_fan_probe(struct platform_device *pdev)
if (result)
return result;
+ if (IS_REACHABLE(CONFIG_HWMON)) {
+ result = devm_acpi_fan_create_hwmon(device);
+ if (result)
+ return result;
+ }
+
result = acpi_fan_create_attributes(device);
if (result)
return result;
diff --git a/drivers/acpi/fan_hwmon.c b/drivers/acpi/fan_hwmon.c
new file mode 100644
index 000000000000..4f2bec8664f4
--- /dev/null
+++ b/drivers/acpi/fan_hwmon.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * fan_hwmon.c - hwmon interface for the ACPI Fan driver
+ *
+ * Copyright (C) 2024 Armin Wolf <W_Armin@gmx.de>
+ */
+
+#include <linux/acpi.h>
+#include <linux/hwmon.h>
+#include <linux/limits.h>
+
+#include "fan.h"
+
+static umode_t acpi_fan_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr,
+ int channel)
+{
+ return 0444;
+}
+
+static int acpi_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+ long *val)
+{
+ struct acpi_device *adev = dev_get_drvdata(dev);
+ struct acpi_fan_fst fst;
+ int ret;
+
+ switch (type) {
+ case hwmon_fan:
+ ret = acpi_fan_get_fst(adev, &fst);
+ if (ret < 0)
+ return ret;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ if (fst.speed > LONG_MAX)
+ return -EOVERFLOW;
+
+ *val = fst.speed;
+ return 0;
+ case hwmon_fan_fault:
+ *val = (fst.speed == U32_MAX);
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static const struct hwmon_ops acpi_fan_ops = {
+ .is_visible = acpi_fan_is_visible,
+ .read = acpi_fan_read,
+};
+
+static const struct hwmon_channel_info * const acpi_fan_info[] = {
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_FAULT),
+ NULL
+};
+
+static const struct hwmon_chip_info acpi_fan_chip_info = {
+ .ops = &acpi_fan_ops,
+ .info = acpi_fan_info,
+};
+
+int devm_acpi_fan_create_hwmon(struct acpi_device *device)
+{
+ struct device *hdev;
+
+ hdev = devm_hwmon_device_register_with_info(&device->dev, "acpi_fan", device,
+ &acpi_fan_chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(hdev);
+}
--
2.39.2
next reply other threads:[~2024-04-08 12:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-08 12:37 Armin Wolf [this message]
2024-04-08 15:11 ` [PATCH] ACPI: fan: Add hwmon support Thomas Weißschuh
2024-04-08 15:48 ` Ilpo Järvinen
2024-04-08 17:12 ` Armin Wolf
2024-04-08 17:15 ` Ilpo Järvinen
-- strict thread matches above, loose matches on Subject: below --
2024-04-22 5:42 Armin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240408123718.15512-1-W_Armin@gmx.de \
--to=w_armin@gmx.de \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlj@danelec.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).