From: Luca Weiss <luca.weiss@fairphone.com>
To: cros-qcom-dts-watchers@chromium.org,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Luca Weiss <luca.weiss@fairphone.com>
Subject: [PATCH 1/2] arm64: dts: qcom: sc7280: Add APR nodes for sound
Date: Fri, 10 May 2024 14:27:08 +0200 [thread overview]
Message-ID: <20240510-sc7280-apr-v1-1-e9eabda05f85@fairphone.com> (raw)
In-Reply-To: <20240510-sc7280-apr-v1-0-e9eabda05f85@fairphone.com>
Add the different services found on APR on some devices with SC7280 SoC.
Additionally add an empty sound node in the root node as is seen on
other SoC dtsi files so device dt's can easily use that.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 73 ++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index fc9ec367e3a5..659212bb38c1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -24,6 +24,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
@@ -3762,6 +3763,75 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -5991,6 +6061,9 @@ cpufreq_hw: cpufreq@18591000 {
};
};
+ sound: sound {
+ };
+
thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
--
2.45.0
next prev parent reply other threads:[~2024-05-10 12:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 12:27 [PATCH 0/2] Add basic APR sound support for SC7280 SoC Luca Weiss
2024-05-10 12:27 ` Luca Weiss [this message]
2024-05-10 12:27 ` [PATCH DNM 2/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support Luca Weiss
2024-05-28 21:35 ` Bjorn Andersson
2024-05-29 6:18 ` Luca Weiss
2024-05-10 13:53 ` [PATCH 0/2] Add basic APR sound support for SC7280 SoC Rob Herring (Arm)
2024-05-28 3:32 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510-sc7280-apr-v1-1-e9eabda05f85@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=quic_mohs@quicinc.com \
--cc=quic_srivasam@quicinc.com \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).