From: Calvince Otieno <calvncce@gmail.com>
To: gustavo@embeddedor.com, outreachy@lists.linux.dev
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Calvince Otieno <calvncce@gmail.com>,
Bagas Sanjaya <bagasdotme@gmail.com>,
Deepak R Varma <drv@mailo.com>, Simon Horman <horms@kernel.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] staging: wlan-ng: use netdev_dbg over pr_debug
Date: Tue, 17 Oct 2023 12:18:02 +0300 [thread overview]
Message-ID: <ZS5RSsaNvOvshNj6@lab-ubuntu> (raw)
This patch replaces the usage of pr_debug() with netdev_dbg().
The change is made to enhance context-aware debugging,
improve code clarity, and maintain compatibility with established
network debugging practices. There were no functional code changes.
Signed-off-by: Calvince Otieno <calvncce@gmail.com>
---
drivers/staging/wlan-ng/prism2sta.c | 127 +++++++++++++++-------------
1 file changed, 69 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
index b5e95a3207fe..964164bb4165 100644
--- a/drivers/staging/wlan-ng/prism2sta.c
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -265,46 +265,50 @@ static int prism2sta_mlmerequest(struct wlandevice *wlandev,
switch (msg->msgcode) {
case DIDMSG_DOT11REQ_MIBGET:
- pr_debug("Received mibget request\n");
+ netdev_dbg(wlandev->netdev, "Received mibget request\n");
result = prism2mgmt_mibset_mibget(wlandev, msg);
break;
case DIDMSG_DOT11REQ_MIBSET:
- pr_debug("Received mibset request\n");
+ netdev_dbg(wlandev->netdev, "Received mibset request\n");
result = prism2mgmt_mibset_mibget(wlandev, msg);
break;
case DIDMSG_DOT11REQ_SCAN:
- pr_debug("Received scan request\n");
+ netdev_dbg(wlandev->netdev, "Received scan request\n");
result = prism2mgmt_scan(wlandev, msg);
break;
case DIDMSG_DOT11REQ_SCAN_RESULTS:
- pr_debug("Received scan_results request\n");
+ netdev_dbg(wlandev->netdev, "Received scan_results request\n");
result = prism2mgmt_scan_results(wlandev, msg);
break;
case DIDMSG_DOT11REQ_START:
- pr_debug("Received mlme start request\n");
+ netdev_dbg(wlandev->netdev, "Received mlme start request\n");
result = prism2mgmt_start(wlandev, msg);
break;
/*
* Prism2 specific messages
*/
case DIDMSG_P2REQ_READPDA:
- pr_debug("Received mlme readpda request\n");
+ netdev_dbg(wlandev->netdev, "Received mlme readpda request\n");
result = prism2mgmt_readpda(wlandev, msg);
break;
case DIDMSG_P2REQ_RAMDL_STATE:
- pr_debug("Received mlme ramdl_state request\n");
+ netdev_dbg(wlandev->netdev,
+ "Received mlme ramdl_state request\n");
result = prism2mgmt_ramdl_state(wlandev, msg);
break;
case DIDMSG_P2REQ_RAMDL_WRITE:
- pr_debug("Received mlme ramdl_write request\n");
+ netdev_dbg(wlandev->netdev,
+ "Received mlme ramdl_write request\n");
result = prism2mgmt_ramdl_write(wlandev, msg);
break;
case DIDMSG_P2REQ_FLASHDL_STATE:
- pr_debug("Received mlme flashdl_state request\n");
+ netdev_dbg(wlandev->netdev,
+ "Received mlme flashdl_state request\n");
result = prism2mgmt_flashdl_state(wlandev, msg);
break;
case DIDMSG_P2REQ_FLASHDL_WRITE:
- pr_debug("Received mlme flashdl_write request\n");
+ netdev_dbg(wlandev->netdev,
+ "Received mlme flashdl_write request\n");
result = prism2mgmt_flashdl_write(wlandev, msg);
break;
/*
@@ -315,7 +319,7 @@ static int prism2sta_mlmerequest(struct wlandevice *wlandev,
case DIDMSG_LNXREQ_IFSTATE: {
struct p80211msg_lnxreq_ifstate *ifstatemsg;
- pr_debug("Received mlme ifstate request\n");
+ netdev_dbg(wlandev->netdev, "Received mlme ifstate request\n");
ifstatemsg = (struct p80211msg_lnxreq_ifstate *)msg;
result = prism2sta_ifstate(wlandev,
ifstatemsg->ifstate.data);
@@ -326,17 +330,18 @@ static int prism2sta_mlmerequest(struct wlandevice *wlandev,
break;
}
case DIDMSG_LNXREQ_WLANSNIFF:
- pr_debug("Received mlme wlansniff request\n");
+ netdev_dbg(wlandev->netdev,
+ "Received mlme wlansniff request\n");
result = prism2mgmt_wlansniff(wlandev, msg);
break;
case DIDMSG_LNXREQ_AUTOJOIN:
- pr_debug("Received mlme autojoin request\n");
+ netdev_dbg(wlandev->netdev, "Received mlme autojoin request\n");
result = prism2mgmt_autojoin(wlandev, msg);
break;
case DIDMSG_LNXREQ_COMMSQUALITY: {
struct p80211msg_lnxreq_commsquality *qualmsg;
- pr_debug("Received commsquality request\n");
+ netdev_dbg(wlandev->netdev, "Received commsquality request\n");
qualmsg = (struct p80211msg_lnxreq_commsquality *)msg;
@@ -389,8 +394,8 @@ u32 prism2sta_ifstate(struct wlandevice *wlandev, u32 ifstate)
result = P80211ENUM_resultcode_implementation_failure;
- pr_debug("Current MSD state(%d), requesting(%d)\n",
- wlandev->msdstate, ifstate);
+ netdev_dbg(wlandev->netdev, "Current MSD state(%d), requesting(%d)\n",
+ wlandev->msdstate, ifstate);
switch (ifstate) {
case P80211ENUM_ifstate_fwload:
switch (wlandev->msdstate) {
@@ -998,15 +1003,15 @@ static void prism2sta_inf_scanresults(struct wlandevice *wlandev,
nbss /= sizeof(struct hfa384x_scan_result_sub);
/* Print em */
- pr_debug("rx scanresults, reason=%d, nbss=%d:\n",
- inf->info.scanresult.scanreason, nbss);
+ netdev_dbg(wlandev->netdev, "rx scanresults, reason=%d, nbss=%d:\n",
+ inf->info.scanresult.scanreason, nbss);
for (i = 0; i < nbss; i++) {
- pr_debug("chid=%d anl=%d sl=%d bcnint=%d\n",
- sr->result[i].chid,
- sr->result[i].anl,
- sr->result[i].sl, sr->result[i].bcnint);
- pr_debug(" capinfo=0x%04x proberesp_rate=%d\n",
- sr->result[i].capinfo, sr->result[i].proberesp_rate);
+ netdev_dbg(wlandev->netdev, "chid=%d anl=%d sl=%d bcnint=%d\n",
+ sr->result[i].chid, sr->result[i].anl,
+ sr->result[i].sl, sr->result[i].bcnint);
+ netdev_dbg(wlandev->netdev,
+ " capinfo=0x%04x proberesp_rate=%d\n",
+ sr->result[i].capinfo, sr->result[i].proberesp_rate);
}
/* issue a join request */
joinreq.channel = sr->result[0].chid;
@@ -1044,7 +1049,7 @@ static void prism2sta_inf_hostscanresults(struct wlandevice *wlandev,
int nbss;
nbss = (inf->framelen - 3) / 32;
- pr_debug("Received %d hostscan results\n", nbss);
+ netdev_dbg(wlandev->netdev, "Received %d hostscan results\n", nbss);
if (nbss > 32)
nbss = 32;
@@ -1107,13 +1112,14 @@ static void prism2sta_inf_chinforesults(struct wlandevice *wlandev,
chinforesult->pnl = result->pnl;
chinforesult->active = result->active;
- pr_debug("chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
- chan + 1,
- (chinforesult->active & HFA384x_CHINFORESULT_BSSACTIVE)
- ? "signal" : "noise",
- chinforesult->anl, chinforesult->pnl,
- (chinforesult->active & HFA384x_CHINFORESULT_PCFACTIVE)
- ? 1 : 0);
+ netdev_dbg(wlandev->netdev,
+ "chinfo: channel %d, %s level (avg/peak)=%d/%d dB, pcf %d\n",
+ chan + 1,
+ (chinforesult->active & HFA384x_CHINFORESULT_BSSACTIVE) ?
+ "signal" : "noise",
+ chinforesult->anl,
+ chinforesult->pnl,
+ (chinforesult->active & HFA384x_CHINFORESULT_PCFACTIVE) ? 1 : 0);
n++;
}
atomic_set(&hw->channel_info.done, 2);
@@ -1192,9 +1198,9 @@ void prism2sta_processing_defer(struct work_struct *data)
wlandev->bssid,
WLAN_BSSID_LEN);
if (result) {
- pr_debug
- ("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTBSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTBSSID, result);
return;
}
@@ -1202,9 +1208,9 @@ void prism2sta_processing_defer(struct work_struct *data)
HFA384x_RID_CURRENTSSID,
&ssid, sizeof(ssid));
if (result) {
- pr_debug
- ("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTSSID, result);
return;
}
prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
@@ -1215,9 +1221,9 @@ void prism2sta_processing_defer(struct work_struct *data)
HFA384x_RID_PORTSTATUS,
&portstatus);
if (result) {
- pr_debug
- ("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_PORTSTATUS, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_PORTSTATUS, result);
return;
}
wlandev->macmode =
@@ -1275,8 +1281,9 @@ void prism2sta_processing_defer(struct work_struct *data)
HFA384x_RID_CURRENTBSSID,
wlandev->bssid, WLAN_BSSID_LEN);
if (result) {
- pr_debug("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTBSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTBSSID, result);
return;
}
@@ -1284,8 +1291,9 @@ void prism2sta_processing_defer(struct work_struct *data)
HFA384x_RID_CURRENTSSID,
&ssid, sizeof(ssid));
if (result) {
- pr_debug("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTSSID, result);
return;
}
prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
@@ -1761,7 +1769,7 @@ void prism2sta_ev_info(struct wlandevice *wlandev,
*/
void prism2sta_ev_txexc(struct wlandevice *wlandev, u16 status)
{
- pr_debug("TxExc status=0x%x.\n", status);
+ netdev_dbg(wlandev->netdev, "TxExc status=0x%x.\n", status);
}
/*
@@ -1782,7 +1790,7 @@ void prism2sta_ev_txexc(struct wlandevice *wlandev, u16 status)
*/
void prism2sta_ev_tx(struct wlandevice *wlandev, u16 status)
{
- pr_debug("Tx Complete, status=0x%04x\n", status);
+ netdev_dbg(wlandev->netdev, "Tx Complete, status=0x%04x\n", status);
/* update linux network stats */
wlandev->netdev->stats.tx_packets++;
}
@@ -1891,10 +1899,10 @@ void prism2sta_commsqual_defer(struct work_struct *data)
return;
}
- pr_debug("commsqual %d %d %d\n",
- le16_to_cpu(hw->qual.cq_curr_bss),
- le16_to_cpu(hw->qual.asl_curr_bss),
- le16_to_cpu(hw->qual.anl_curr_fc));
+ netdev_dbg(wlandev->netdev, "commsqual %d %d %d\n",
+ le16_to_cpu(hw->qual.cq_curr_bss),
+ le16_to_cpu(hw->qual.asl_curr_bss),
+ le16_to_cpu(hw->qual.anl_curr_fc));
}
/* Get the signal rate */
@@ -1903,8 +1911,8 @@ void prism2sta_commsqual_defer(struct work_struct *data)
result = p80211req_dorequest(wlandev, (u8 *)&msg);
if (result) {
- pr_debug("get signal rate failed, result = %d\n",
- result);
+ netdev_dbg(wlandev->netdev,
+ "get signal rate failed, result = %d\n", result);
return;
}
@@ -1922,7 +1930,8 @@ void prism2sta_commsqual_defer(struct work_struct *data)
hw->txrate = 110;
break;
default:
- pr_debug("Bad ratebit (%d)\n", mibitem->data);
+ netdev_dbg(wlandev->netdev, "Bad ratebit (%d)\n",
+ mibitem->data);
}
/* Lastly, we need to make sure the BSSID didn't change on us */
@@ -1930,8 +1939,9 @@ void prism2sta_commsqual_defer(struct work_struct *data)
HFA384x_RID_CURRENTBSSID,
wlandev->bssid, WLAN_BSSID_LEN);
if (result) {
- pr_debug("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTBSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTBSSID, result);
return;
}
@@ -1939,8 +1949,9 @@ void prism2sta_commsqual_defer(struct work_struct *data)
HFA384x_RID_CURRENTSSID,
&ssid, sizeof(ssid));
if (result) {
- pr_debug("getconfig(0x%02x) failed, result = %d\n",
- HFA384x_RID_CURRENTSSID, result);
+ netdev_dbg(wlandev->netdev,
+ "getconfig(0x%02x) failed, result = %d\n",
+ HFA384x_RID_CURRENTSSID, result);
return;
}
prism2mgmt_bytestr2pstr((struct hfa384x_bytestr *)&ssid,
--
2.34.1
reply other threads:[~2023-10-17 9:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZS5RSsaNvOvshNj6@lab-ubuntu \
--to=calvncce@gmail.com \
--cc=bagasdotme@gmail.com \
--cc=drv@mailo.com \
--cc=gregkh@linuxfoundation.org \
--cc=gustavo@embeddedor.com \
--cc=horms@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=outreachy@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).