From: Andreas Werner <andreas.werner@men.de>
To: linux-kernel@vger.kernel.org
Cc: jdelvare@suse.com, linux@roeck-us.net, lm-sensors@lm-sensors.org,
wni@nvidia.com
Subject: [lm-sensors] LM90 driver and ti tmp461 detection
Date: Thu, 10 Dec 2015 12:08:57 +0000 [thread overview]
Message-ID: <20151210120856.GA27765@awelinux> (raw)
Hi,
i have a temperature sensor device named "TI TMP461" which is quite the
same than the tmp451 which is already included in the lm90 driver.
I just want to add the tmp461 to the driver but currently i have no way
to differ between the tmp461 and tmp451.
The main different is that the tmp461 address can be configured by to Pins
whereas the tmp451 has a fixed address.
The register layout is quite the same except that the tmp461 has one
register more (0x16 Channel Enable Register).
Every zero bit is the same for both bits, so we cannot use these bits for
identification.
Does anybody of you have a tmp451 to read out the register 0x16 (which is
not implement but i expect a value). May be we can use this to
identify the tmp461.
Regards
Andy
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2015-12-10 12:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-10 12:08 Andreas Werner [this message]
[not found] ` <5669AB55.5030309@roeck-us.net>
2015-12-10 17:12 ` [lm-sensors] LM90 driver and ti tmp461 detection Andreas Werner
[not found] ` <5669B9D9.9050908@roeck-us.net>
2015-12-10 18:03 ` Andreas Werner
[not found] ` <5669BB37.3050207@roeck-us.net>
2015-12-10 18:09 ` Andreas Werner
2015-12-12 10:08 ` Jean Delvare
2015-12-15 15:11 ` Andreas Werner
2015-12-17 11:48 ` Jean Delvare
2015-12-17 11:54 ` Andreas Werner
2015-12-17 14:57 ` Guenter Roeck
2015-12-18 8:18 ` Andreas Werner
2015-12-12 11:42 ` Andreas Werner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151210120856.GA27765@awelinux \
--to=andreas.werner@men.de \
--cc=jdelvare@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).