From: Guenter Roeck <patchwork@patchwork.roeck-us.net>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH v3 22/25] hwmon: (it87) Enhance validation for fan4 and fan5
Date: Wed, 27 Jan 2016 02:03:46 +0000 [thread overview]
Message-ID: <1453860229-23614-23-git-send-email-patchwork@patchwork.roeck-us.net> (raw)
From: Guenter Roeck <linux@roeck-us.net>
Several of the chips supported by this driver have a configuration
register to enable fan4 and fan5. Use those registers to determine
if fan4 and fan5 tachometers are supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/it87.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f40d81a0a9fc..5adb269918fb 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2415,6 +2415,29 @@ static int __init it87_find(int sioaddr, unsigned short *address,
superio_select(sioaddr, GPIO);
+ /* Check for fan4, fan5 */
+ if (has_five_fans(config)) {
+ reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
+ switch (sio_data->type) {
+ case it8718:
+ if (reg & BIT(5))
+ sio_data->skip_fan |= BIT(3);
+ if (reg & BIT(4))
+ sio_data->skip_fan |= BIT(4);
+ break;
+ case it8720:
+ case it8721:
+ case it8728:
+ if (!(reg & BIT(5)))
+ sio_data->skip_fan |= BIT(3);
+ if (!(reg & BIT(4)))
+ sio_data->skip_fan |= BIT(4);
+ break;
+ default:
+ break;
+ }
+ }
+
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (!sio_data->skip_vid) {
/* We need at least 4 VID pins */
--
2.1.4
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
reply other threads:[~2016-01-27 2:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453860229-23614-23-git-send-email-patchwork@patchwork.roeck-us.net \
--to=patchwork@patchwork.roeck-us.net \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).