* 2.6.18-rc1: zd1211rw doesn't work yet?
@ 2006-07-08 19:24 Harald Dunkel
2006-07-08 20:42 ` Guennadi Liakhovetski
0 siblings, 1 reply; 2+ messages in thread
From: Harald Dunkel @ 2006-07-08 19:24 UTC (permalink / raw
To: lkml
[-- Attachment #1: Type: text/plain, Size: 1365 bytes --]
Hi folks,
I have used the "external" zd1211 driver for months without problems,
but the integrated version in 2.6.18-rc1 does not work for me.
iwconfig says:
wlan0 802.11g zd1211 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Invalid
Bit Rate=1 Mb/s
Encryption key:XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX Security mode:open
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I had expected something like this (running iwconfig for 2.6.17.3
+ zd1211 rev80):
wlan0 802.11b/g NIC ESSID:"harrinet"
Mode:Managed Frequency=2.432 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate:54 Mb/s
Retry:off RTS thr=2432 B Fragment thr:off
Encryption key:****-****-****-****-****-****-** Security mode:open
Power Management:off
Link Quality=84/100 Signal level=55/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:44
Tx excessive retries:145 Invalid misc:0 Missed beacon:0
Please note that there is no MAC for 2.6.18-rc1.
???
Any hint would be highly appreciated. Of course I would be glad to
help debugging.
Regards
Harri
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.6.18-rc1: zd1211rw doesn't work yet?
2006-07-08 19:24 2.6.18-rc1: zd1211rw doesn't work yet? Harald Dunkel
@ 2006-07-08 20:42 ` Guennadi Liakhovetski
0 siblings, 0 replies; 2+ messages in thread
From: Guennadi Liakhovetski @ 2006-07-08 20:42 UTC (permalink / raw
To: Harald Dunkel; +Cc: lkml
On Sat, 8 Jul 2006, Harald Dunkel wrote:
> Hi folks,
>
> I have used the "external" zd1211 driver for months without problems,
> but the integrated version in 2.6.18-rc1 does not work for me.
Please, post this to <zd1211-devs@lists.sourceforge.net> along with
details for your dongle, including the "zd1211 chip ..." line from your
dmesg.
Thanks
Guennadi
>
> iwconfig says:
>
> wlan0 802.11g zd1211 ESSID:""
> Mode:Managed Frequency:2.412 GHz Access Point: Invalid
> Bit Rate=1 Mb/s
> Encryption key:XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX Security mode:open
> Link Quality:0 Signal level:0 Noise level:0
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
> I had expected something like this (running iwconfig for 2.6.17.3
> + zd1211 rev80):
>
> wlan0 802.11b/g NIC ESSID:"harrinet"
> Mode:Managed Frequency=2.432 GHz Access Point: XX:XX:XX:XX:XX:XX
> Bit Rate:54 Mb/s
> Retry:off RTS thr=2432 B Fragment thr:off
> Encryption key:****-****-****-****-****-****-** Security mode:open
> Power Management:off
> Link Quality=84/100 Signal level=55/100 Noise level=0/100
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:44
> Tx excessive retries:145 Invalid misc:0 Missed beacon:0
>
> Please note that there is no MAC for 2.6.18-rc1.
>
> ???
>
>
> Any hint would be highly appreciated. Of course I would be glad to
> help debugging.
>
>
> Regards
>
> Harri
>
>
>
>
---
Guennadi Liakhovetski
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-07-08 20:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-08 19:24 2.6.18-rc1: zd1211rw doesn't work yet? Harald Dunkel
2006-07-08 20:42 ` Guennadi Liakhovetski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).