On Thu, Jun 03, 2021 at 06:05:30PM +0800, Jitao Shi wrote:
> Due to the clock sequence changing, so move the reg commit to

Which change do you refer to, here? The previous patch? If so, I assume
this means the series is not bisectable because the driver is broken
when only the first patch is applied?

> config().
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
>  drivers/pwm/pwm-mtk-disp.c | 20 +++++++-------------
>  1 file changed, 7 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
> index b5771e2c54b8..b87b3c00a685 100644
> --- a/drivers/pwm/pwm-mtk-disp.c
> +++ b/drivers/pwm/pwm-mtk-disp.c
> @@ -135,6 +135,13 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
>  					 mdp->data->commit_mask,
>  					 0x0);
> +	} else {

You dropped the code comment? Is it wrong? Or is it too obvious to be
mentioned?

> +		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> +					 mdp->data->bls_debug_mask,
> +					 mdp->data->bls_debug_mask);
> +		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> +					 mdp->data->con0_sel,
> +					 mdp->data->con0_sel);
>  	}
>  
>  	return 0;
> @@ -208,19 +215,6 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, mdp);
>  
> -	/*
> -	 * For MT2701, disable double buffer before writing register
> -	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
> -	 */
> -	if (!mdp->data->has_commit) {
> -		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> -					 mdp->data->bls_debug_mask,
> -					 mdp->data->bls_debug_mask);
> -		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> -					 mdp->data->con0_sel,
> -					 mdp->data->con0_sel);
> -	}
> -
>  	return 0;
>  }

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |