* [PATCH v2] hwmon: corsair-psu: fix suspend behavior @ 2021-06-03 11:51 Wilken Gottwalt 2021-06-03 16:05 ` Guenter Roeck 0 siblings, 1 reply; 6+ messages in thread From: Wilken Gottwalt @ 2021-06-03 11:51 UTC (permalink / raw To: linux-kernel; +Cc: Jean Delvare, Guenter Roeck, Jonathan Corbet, linux-hwmon During standby some PSUs turn off the microcontroller. A re-init is required during resume or the microcontroller stays unresponsive. Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> --- Changes in v2: - corrected fixes commit --- drivers/hwmon/corsair-psu.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c index 02298b86b57b..731d5117f9f1 100644 --- a/drivers/hwmon/corsair-psu.c +++ b/drivers/hwmon/corsair-psu.c @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo return 0; } +#ifdef CONFIG_PM +static int corsairpsu_resume(struct hid_device *hdev) +{ + struct corsairpsu_data *priv = hid_get_drvdata(hdev); + + /* some PSUs turn off the microcontroller during standby, so a reinit is required */ + return corsairpsu_init(priv); +} +#endif + static const struct hid_device_id corsairpsu_idtable[] = { { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { .probe = corsairpsu_probe, .remove = corsairpsu_remove, .raw_event = corsairpsu_raw_event, +#ifdef CONFIG_PM + .resume = corsairpsu_resume, + .reset_resume = corsairpsu_resume, +#endif }; module_hid_driver(corsairpsu_driver); -- 2.31.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior 2021-06-03 11:51 [PATCH v2] hwmon: corsair-psu: fix suspend behavior Wilken Gottwalt @ 2021-06-03 16:05 ` Guenter Roeck 2021-06-04 5:17 ` Wilken Gottwalt 0 siblings, 1 reply; 6+ messages in thread From: Guenter Roeck @ 2021-06-03 16:05 UTC (permalink / raw To: Wilken Gottwalt; +Cc: linux-kernel, Jean Delvare, Jonathan Corbet, linux-hwmon On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote: > During standby some PSUs turn off the microcontroller. A re-init is > required during resume or the microcontroller stays unresponsive. > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Applied. Thanks, Guenter > --- > Changes in v2: > - corrected fixes commit > --- > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c > index 02298b86b57b..731d5117f9f1 100644 > --- a/drivers/hwmon/corsair-psu.c > +++ b/drivers/hwmon/corsair-psu.c > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo > return 0; > } > > +#ifdef CONFIG_PM > +static int corsairpsu_resume(struct hid_device *hdev) > +{ > + struct corsairpsu_data *priv = hid_get_drvdata(hdev); > + > + /* some PSUs turn off the microcontroller during standby, so a reinit is required */ > + return corsairpsu_init(priv); > +} > +#endif > + > static const struct hid_device_id corsairpsu_idtable[] = { > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { > .probe = corsairpsu_probe, > .remove = corsairpsu_remove, > .raw_event = corsairpsu_raw_event, > +#ifdef CONFIG_PM > + .resume = corsairpsu_resume, > + .reset_resume = corsairpsu_resume, > +#endif > }; > module_hid_driver(corsairpsu_driver); > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior 2021-06-03 16:05 ` Guenter Roeck @ 2021-06-04 5:17 ` Wilken Gottwalt 2021-06-04 11:05 ` Guenter Roeck 0 siblings, 1 reply; 6+ messages in thread From: Wilken Gottwalt @ 2021-06-04 5:17 UTC (permalink / raw To: Guenter Roeck; +Cc: linux-kernel, Jean Delvare, Jonathan Corbet, linux-hwmon On Thu, 3 Jun 2021 09:05:33 -0700 Guenter Roeck <linux@roeck-us.net> wrote: > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote: > > During standby some PSUs turn off the microcontroller. A re-init is > > required during resume or the microcontroller stays unresponsive. > > > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> > > Applied. Thank you. Though I have an odd question. I would like to change the licensing to a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want to use my code but use a MPL license. What would be the best way to do this? greetings, Will > Thanks, > Guenter > > > --- > > Changes in v2: > > - corrected fixes commit > > --- > > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c > > index 02298b86b57b..731d5117f9f1 100644 > > --- a/drivers/hwmon/corsair-psu.c > > +++ b/drivers/hwmon/corsair-psu.c > > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report > > *repo return 0; > > } > > > > +#ifdef CONFIG_PM > > +static int corsairpsu_resume(struct hid_device *hdev) > > +{ > > + struct corsairpsu_data *priv = hid_get_drvdata(hdev); > > + > > + /* some PSUs turn off the microcontroller during standby, so a reinit is required */ > > + return corsairpsu_init(priv); > > +} > > +#endif > > + > > static const struct hid_device_id corsairpsu_idtable[] = { > > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ > > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ > > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { > > .probe = corsairpsu_probe, > > .remove = corsairpsu_remove, > > .raw_event = corsairpsu_raw_event, > > +#ifdef CONFIG_PM > > + .resume = corsairpsu_resume, > > + .reset_resume = corsairpsu_resume, > > +#endif > > }; > > module_hid_driver(corsairpsu_driver); > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior 2021-06-04 5:17 ` Wilken Gottwalt @ 2021-06-04 11:05 ` Guenter Roeck 2021-06-13 14:06 ` Wilken Gottwalt 0 siblings, 1 reply; 6+ messages in thread From: Guenter Roeck @ 2021-06-04 11:05 UTC (permalink / raw To: Wilken Gottwalt; +Cc: linux-kernel, Jean Delvare, Jonathan Corbet, linux-hwmon On Fri, Jun 04, 2021 at 05:17:11AM +0000, Wilken Gottwalt wrote: > On Thu, 3 Jun 2021 09:05:33 -0700 > Guenter Roeck <linux@roeck-us.net> wrote: > > > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote: > > > During standby some PSUs turn off the microcontroller. A re-init is > > > required during resume or the microcontroller stays unresponsive. > > > > > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") > > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> > > > > Applied. > > Thank you. Though I have an odd question. I would like to change the licensing to > a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want > to use my code but use a MPL license. What would be the best way to do this? Submit a patch which would need an Acked-by: from everyone who contributed to the driver. As far as I can see, that would be Wan Jiabing <wanjiabing@vivo.com>, Jack Doan <me@jackdoan.com>, and Colin Ian King <colin.king@canonical.com>. I would suggest to ask them first if the license change is ok with them. Guenter > > greetings, > Will > > > Thanks, > > Guenter > > > > > --- > > > Changes in v2: > > > - corrected fixes commit > > > --- > > > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++ > > > 1 file changed, 14 insertions(+) > > > > > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c > > > index 02298b86b57b..731d5117f9f1 100644 > > > --- a/drivers/hwmon/corsair-psu.c > > > +++ b/drivers/hwmon/corsair-psu.c > > > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report > > > *repo return 0; > > > } > > > > > > +#ifdef CONFIG_PM > > > +static int corsairpsu_resume(struct hid_device *hdev) > > > +{ > > > + struct corsairpsu_data *priv = hid_get_drvdata(hdev); > > > + > > > + /* some PSUs turn off the microcontroller during standby, so a reinit is required */ > > > + return corsairpsu_init(priv); > > > +} > > > +#endif > > > + > > > static const struct hid_device_id corsairpsu_idtable[] = { > > > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ > > > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ > > > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { > > > .probe = corsairpsu_probe, > > > .remove = corsairpsu_remove, > > > .raw_event = corsairpsu_raw_event, > > > +#ifdef CONFIG_PM > > > + .resume = corsairpsu_resume, > > > + .reset_resume = corsairpsu_resume, > > > +#endif > > > }; > > > module_hid_driver(corsairpsu_driver); > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior 2021-06-04 11:05 ` Guenter Roeck @ 2021-06-13 14:06 ` Wilken Gottwalt 2021-06-13 17:42 ` Guenter Roeck 0 siblings, 1 reply; 6+ messages in thread From: Wilken Gottwalt @ 2021-06-13 14:06 UTC (permalink / raw To: Guenter Roeck; +Cc: linux-kernel, Jean Delvare, Jonathan Corbet, linux-hwmon On Fri, 4 Jun 2021 04:05:14 -0700 Guenter Roeck <linux@roeck-us.net> wrote: > On Fri, Jun 04, 2021 at 05:17:11AM +0000, Wilken Gottwalt wrote: > > On Thu, 3 Jun 2021 09:05:33 -0700 > > Guenter Roeck <linux@roeck-us.net> wrote: > > > > > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote: > > > > During standby some PSUs turn off the microcontroller. A re-init is > > > > required during resume or the microcontroller stays unresponsive. > > > > > > > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") > > > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> > > > > > > Applied. > > > > Thank you. Though I have an odd question. I would like to change the licensing to > > a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want > > to use my code but use a MPL license. What would be the best way to do this? > > Submit a patch which would need an Acked-by: from everyone who contributed > to the driver. As far as I can see, that would be Wan Jiabing > <wanjiabing@vivo.com>, Jack Doan <me@jackdoan.com>, and Colin Ian King > <colin.king@canonical.com>. I would suggest to ask them first if the license > change is ok with them. I got the okay from Jack who had the idea for the precision patch. But the other two, who did the semicolon and long cast patches do not reply. So what now? > Guenter > > > > > greetings, > > Will > > > > > Thanks, > > > Guenter > > > > > > > --- > > > > Changes in v2: > > > > - corrected fixes commit > > > > --- > > > > drivers/hwmon/corsair-psu.c | 14 ++++++++++++++ > > > > 1 file changed, 14 insertions(+) > > > > > > > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c > > > > index 02298b86b57b..731d5117f9f1 100644 > > > > --- a/drivers/hwmon/corsair-psu.c > > > > +++ b/drivers/hwmon/corsair-psu.c > > > > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct > > > > hid_report *repo return 0; > > > > } > > > > > > > > +#ifdef CONFIG_PM > > > > +static int corsairpsu_resume(struct hid_device *hdev) > > > > +{ > > > > + struct corsairpsu_data *priv = hid_get_drvdata(hdev); > > > > + > > > > + /* some PSUs turn off the microcontroller during standby, so a reinit is required > > > > */ > > > > + return corsairpsu_init(priv); > > > > +} > > > > +#endif > > > > + > > > > static const struct hid_device_id corsairpsu_idtable[] = { > > > > { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ > > > > { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ > > > > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { > > > > .probe = corsairpsu_probe, > > > > .remove = corsairpsu_remove, > > > > .raw_event = corsairpsu_raw_event, > > > > +#ifdef CONFIG_PM > > > > + .resume = corsairpsu_resume, > > > > + .reset_resume = corsairpsu_resume, > > > > +#endif > > > > }; > > > > module_hid_driver(corsairpsu_driver); > > > > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior 2021-06-13 14:06 ` Wilken Gottwalt @ 2021-06-13 17:42 ` Guenter Roeck 0 siblings, 0 replies; 6+ messages in thread From: Guenter Roeck @ 2021-06-13 17:42 UTC (permalink / raw To: Wilken Gottwalt; +Cc: linux-kernel, Jean Delvare, Jonathan Corbet, linux-hwmon On Sun, Jun 13, 2021 at 02:06:34PM +0000, Wilken Gottwalt wrote: > On Fri, 4 Jun 2021 04:05:14 -0700 > Guenter Roeck <linux@roeck-us.net> wrote: > > > On Fri, Jun 04, 2021 at 05:17:11AM +0000, Wilken Gottwalt wrote: > > > On Thu, 3 Jun 2021 09:05:33 -0700 > > > Guenter Roeck <linux@roeck-us.net> wrote: > > > > > > > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote: > > > > > During standby some PSUs turn off the microcontroller. A re-init is > > > > > required during resume or the microcontroller stays unresponsive. > > > > > > > > > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") > > > > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> > > > > > > > > Applied. > > > > > > Thank you. Though I have an odd question. I would like to change the licensing to > > > a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want > > > to use my code but use a MPL license. What would be the best way to do this? > > > > Submit a patch which would need an Acked-by: from everyone who contributed > > to the driver. As far as I can see, that would be Wan Jiabing > > <wanjiabing@vivo.com>, Jack Doan <me@jackdoan.com>, and Colin Ian King > > <colin.king@canonical.com>. I would suggest to ask them first if the license > > change is ok with them. > > I got the okay from Jack who had the idea for the precision patch. But the other > two, who did the semicolon and long cast patches do not reply. So what now? > I see two options: - Publish your original code (not including the semicolon and long cast patches) as an out-of-tree driver at github or some other open source repository site, with whatever license you want, and ask LibreHardwareMonitor pull it from there. - Submit the driver yourself into LibreHardwareMonitor, again not including the problematic changes, with whatever license you want. Disclaimer: I am not an attorney, and this is not legal advice. Guenter ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-06-13 17:44 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-06-03 11:51 [PATCH v2] hwmon: corsair-psu: fix suspend behavior Wilken Gottwalt 2021-06-03 16:05 ` Guenter Roeck 2021-06-04 5:17 ` Wilken Gottwalt 2021-06-04 11:05 ` Guenter Roeck 2021-06-13 14:06 ` Wilken Gottwalt 2021-06-13 17:42 ` Guenter Roeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).