From: Sam Ravnborg <sam@ravnborg.org>
To: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
linux-kbuild@vger.kernel.org, sfr@canb.auug.org.au
Subject: Re: [PATCH] linux-next: 20090926 - drop autoconf.h from DRBD driver
Date: Sat, 26 Sep 2009 22:08:39 +0200 [thread overview]
Message-ID: <20090926200839.GA5220@merkur.ravnborg.org> (raw)
In-Reply-To: <20090926173143.GA5041@linux.vnet.ibm.com>
On Sat, Sep 26, 2009 at 11:01:43PM +0530, Kamalesh Babulal wrote:
> Hi Sam,
>
> next-20090926 allyesconfig build breaks on powerpc,
>
> drivers/block/drbd/drbd_proc.c:26:28: error: linux/autoconf.h: No such file or directory
> make[3]: *** [drivers/block/drbd/drbd_proc.o] Error 1
>
> dropping autoconf.h from drbd_proc.c helps. The cleanup patch drops the
> unneeded include autoconf.h.
>
> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
I only checked upstream - so this is no big suprise.
As there is no need to explicitly include autoconf.h this
change should be included by the drdb folks even if the
stuff I have does not hit upstream.
Can I ask you to audit the rest of -next for similar issues.
A 'git grep "autoconf\.h"' should be a qucik way to find other
spots to fix up.
Patch is:
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Sam
> --
> drivers/block/drbd/drbd_main.c | 1 -
> drivers/block/drbd/drbd_nl.c | 1 -
> drivers/block/drbd/drbd_proc.c | 1 -
> drivers/block/drbd/drbd_receiver.c | 1 -
> drivers/block/drbd/drbd_req.c | 1 -
> drivers/block/drbd/drbd_req.h | 1 -
> drivers/block/drbd/drbd_worker.c | 1 -
> drivers/staging/cowloop/cowloop.c | 4 ----
> drivers/staging/iio/ring_sw.h | 1 -
> 9 files changed, 0 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
> index edf0b80..80273f2 100644
> --- a/drivers/block/drbd/drbd_main.c
> +++ b/drivers/block/drbd/drbd_main.c
> @@ -26,7 +26,6 @@
>
> */
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
> #include <linux/version.h>
> #include <linux/drbd.h>
> diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
> index 1927ace..cfde310 100644
> --- a/drivers/block/drbd/drbd_nl.c
> +++ b/drivers/block/drbd/drbd_nl.c
> @@ -23,7 +23,6 @@
>
> */
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
> #include <linux/drbd.h>
> #include <linux/in.h>
> diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
> index 98fcb74..bdd0b49 100644
> --- a/drivers/block/drbd/drbd_proc.c
> +++ b/drivers/block/drbd/drbd_proc.c
> @@ -23,7 +23,6 @@
>
> */
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
>
> #include <asm/uaccess.h>
> diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
> index 63686c4..2f81821 100644
> --- a/drivers/block/drbd/drbd_receiver.c
> +++ b/drivers/block/drbd/drbd_receiver.c
> @@ -23,7 +23,6 @@
> */
>
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
>
> #include <asm/uaccess.h>
> diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
> index 0656cf1..1aaa397 100644
> --- a/drivers/block/drbd/drbd_req.c
> +++ b/drivers/block/drbd/drbd_req.c
> @@ -23,7 +23,6 @@
>
> */
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
>
> #include <linux/slab.h>
> diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
> index d37ab57..f22c1bc 100644
> --- a/drivers/block/drbd/drbd_req.h
> +++ b/drivers/block/drbd/drbd_req.h
> @@ -25,7 +25,6 @@
> #ifndef _DRBD_REQ_H
> #define _DRBD_REQ_H
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
>
> #include <linux/slab.h>
> diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
> index 212e954..34a4b3e 100644
> --- a/drivers/block/drbd/drbd_worker.c
> +++ b/drivers/block/drbd/drbd_worker.c
> @@ -23,7 +23,6 @@
>
> */
>
> -#include <linux/autoconf.h>
> #include <linux/module.h>
> #include <linux/version.h>
> #include <linux/drbd.h>
> diff --git a/drivers/staging/cowloop/cowloop.c b/drivers/staging/cowloop/cowloop.c
> index a71c743..a21b9b4 100644
> --- a/drivers/staging/cowloop/cowloop.c
> +++ b/drivers/staging/cowloop/cowloop.c
> @@ -237,10 +237,6 @@ char revision[] = "$Revision: 3.1 $"; /* cowlo_init_module() has
> #endif
>
> #include <linux/types.h>
> -#include <linux/autoconf.h>
> -#ifndef AUTOCONF_INCLUDED
> -#include <linux/config.h>
> -#endif
> #include <linux/module.h>
> #include <linux/version.h>
> #include <linux/moduleparam.h>
> diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h
> index ae70ee0..4b0de7c 100644
> --- a/drivers/staging/iio/ring_sw.h
> +++ b/drivers/staging/iio/ring_sw.h
> @@ -29,7 +29,6 @@
> * driver requests - some may support multiple options */
>
>
> -#include <linux/autoconf.h>
> #include "iio.h"
> #include "ring_generic.h"
>
>
> Kamalesh
>
>
next prev parent reply other threads:[~2009-09-26 20:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-26 5:28 linux-next: Tree for September 26 Stephen Rothwell
2009-09-26 17:31 ` [PATCH] linux-next: 20090926 - drop autoconf.h from DRBD driver Kamalesh Babulal
2009-09-26 20:08 ` Sam Ravnborg [this message]
2009-09-27 2:53 ` Stephen Rothwell
2009-09-27 2:59 ` Stephen Rothwell
2009-09-28 8:50 ` [Drbd-dev] " Lars Ellenberg
2009-09-27 5:43 ` Kamalesh Babulal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090926200839.GA5220@merkur.ravnborg.org \
--to=sam@ravnborg.org \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).