* [PATCH] regulator: bindings: Use the correct symbol for second
@ 2016-08-18 15:31 Fabio Estevam
0 siblings, 0 replies; only message in thread
From: Fabio Estevam @ 2016-08-18 15:31 UTC (permalink / raw
To: broonie; +Cc: linux-kernel, Fabio Estevam
From: Fabio Estevam <fabio.estevam@nxp.com>
The symbol for second is in lower case.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Documentation/devicetree/bindings/regulator/regulator.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index ecfc593..6ab5aef 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
- regulator-allow-bypass: allow the regulator to go into bypass mode
- regulator-allow-set-load: allow the regulator performance level to be configured
- <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-ramp-delay: ramp delay for regulator(in uV/us)
For hardware which supports disabling ramp rate, it should be explicitly
initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
--
2.7.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2016-08-19 3:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-18 15:31 [PATCH] regulator: bindings: Use the correct symbol for second Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).