Linux-XFS Archive mirror
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Fengfei Xi <xi.fengfei@h3c.com>
Cc: sandeen@sandeen.net, darrick.wong@oracle.com,
	linux-kernel@vger.kernel.org, linux-xfs@vger.kernel.org,
	tian.xianting@h3c.com
Subject: Re: [PATCH] xfs: fix system crash caused by null bp->b_pages
Date: Wed, 1 May 2024 15:59:42 -0700	[thread overview]
Message-ID: <20240501225942.GN360919@frogsfrogsfrogs> (raw)
In-Reply-To: <20240428034436.42237-1-xi.fengfei@h3c.com>

On Sun, Apr 28, 2024 at 11:44:36AM +0800, Fengfei Xi wrote:
> >On 12/24/20 3:51 AM, Fengfei Xi wrote:
> >> We have encountered the following problems several times:
> >>     1、A raid slot or hardware problem causes block device loss.
> >>     2、Continue to issue IO requests to the problematic block device.
> >>     3、The system possibly crash after a few hours.
> 
> >What kernel is this on?
> 
> >> dmesg log as below:
> >> [15205901.268313] blk_partition_remap: fail for partition 1
> 
> >I think this message has been gone since kernel v4.16...
> 
> >If you're testing this on an old kernel, can you reproduce it on a
> >current kernel?
> 
> >> [15205901.319309] blk_partition_remap: fail for partition 1
> >> [15205901.319341] blk_partition_remap: fail for partition 1
> >> [15205901.319873] sysctl (3998546): drop_caches: 3
> 
> >What performed the drop_caches immediately before the BUG?  Does
> >the BUG happen without drop_caches?
> 
> >> [15205901.371379] BUG: unable to handle kernel NULL pointer dereference at
> 
> >was something lost here?  "dereference at" ... what?
> 
> >> [15205901.372602] IP: xfs_buf_offset+0x32/0x60 [xfs]
> >> [15205901.373605] PGD 0 P4D 0
> >> [15205901.374690] Oops: 0000 [#1] SMP
> >> [15205901.375629] Modules linked in:
> >> [15205901.382445] CPU: 6 PID: 18545 Comm: xfsaild/sdh1 Kdump: loaded Tainted: G
> >> [15205901.384728] Hardware name:
> >> [15205901.385830] task: ffff885216939e80 task.stack: ffffb28ba9b38000
> >> [15205901.386974] RIP: 0010:xfs_buf_offset+0x32/0x60 [xfs]
> >> [15205901.388044] RSP: 0018:ffffb28ba9b3bc68 EFLAGS: 00010246
> >> [15205901.389021] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b
> >> [15205901.390016] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88627bebf000
> >> [15205901.391075] RBP: ffffb28ba9b3bc98 R08: ffff88627bebf000 R09: 00000001802a000d
> >> [15205901.392031] R10: ffff88521f3a0240 R11: ffff88627bebf000 R12: ffff88521041e000
> >> [15205901.392950] R13: 0000000000000020 R14: ffff88627bebf000 R15: 0000000000000000
> >> [15205901.393858] FS:  0000000000000000(0000) GS:ffff88521f380000(0000) knlGS:0000000000000000
> >> [15205901.394774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> [15205901.395756] CR2: 0000000000000000 CR3: 000000099bc09001 CR4: 00000000007606e0
> >> [15205901.396904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >> [15205901.397869] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >> [15205901.398836] PKRU: 55555554
> >> [15205901.400111] Call Trace:
> >> [15205901.401058]  ? xfs_inode_buf_verify+0x8e/0xf0 [xfs]
> >> [15205901.402069]  ? xfs_buf_delwri_submit_buffers+0x16d/0x2b0 [xfs]
> >> [15205901.403060]  xfs_inode_buf_write_verify+0x10/0x20 [xfs]
> >> [15205901.404017]  _xfs_buf_ioapply+0x88/0x410 [xfs]
> >> [15205901.404990]  ? xfs_buf_delwri_submit_buffers+0x16d/0x2b0 [xfs]
> >> [15205901.405929]  xfs_buf_submit+0x63/0x200 [xfs]
> >> [15205901.406801]  xfs_buf_delwri_submit_buffers+0x16d/0x2b0 [xfs]
> >> [15205901.407675]  ? xfs_buf_delwri_submit_nowait+0x10/0x20 [xfs]
> >> [15205901.408540]  ? xfs_inode_item_push+0xb7/0x190 [xfs]
> >> [15205901.409395]  xfs_buf_delwri_submit_nowait+0x10/0x20 [xfs]
> >> [15205901.410249]  xfsaild+0x29a/0x780 [xfs]
> >> [15205901.411121]  kthread+0x109/0x140
> >> [15205901.411981]  ? xfs_trans_ail_cursor_first+0x90/0x90 [xfs]
> >> [15205901.412785]  ? kthread_park+0x60/0x60
> >> [15205901.413578]  ret_from_fork+0x2a/0x40
> >> 
> >> The "obvious" cause is that the bp->b_pages was NULL in function
> >> xfs_buf_offset. Analyzing vmcore, we found that b_pages=NULL but
> >> b_page_count=16, so b_pages is set to NULL for some reason.
> 
> >this can happen, for example _xfs_buf_get_pages sets the count, but may
> >fail the allocation, and leave the count set while the pointer is NULL.
> >> 
> >> crash> struct xfs_buf ffff88627bebf000 | less
> >>     ...
> >>   b_pages = 0x0,
> >>   b_page_array = {0x0, 0x0},
> >>   b_maps = 0xffff88627bebf118,
> >>   __b_map = {
> >>     bm_bn = 512,
> >>     bm_len = 128
> >>   },
> >>   b_map_count = 1,
> >>   b_io_length = 128,
> >>   b_pin_count = {
> >>     counter = 0
> >>   },
> >>   b_io_remaining = {
> >>     counter = 1
> >>   },
> >>   b_page_count = 16,
> >>   b_offset = 0,
> >>   b_error = 0,
> >>     ...
> >> 
> >> To avoid system crash, we can add the check of 'bp->b_pages' to
> >> xfs_inode_buf_verify(). If b_pages == NULL, we mark the buffer
> >> as -EFSCORRUPTED and the IO will not dispatched.
> >> 
> >> Signed-off-by: Fengfei Xi <xi.fengfei@h3c.com>
> >> Reviewed-by: Xianting Tian <tian.xianting@h3c.com>
> >> ---
> >>  fs/xfs/libxfs/xfs_inode_buf.c | 11 +++++++++++
> >>  1 file changed, 11 insertions(+)
> >> 
> >> diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c
> >> index c667c63f2..5a485c51f 100644
> >> --- a/fs/xfs/libxfs/xfs_inode_buf.c
> >> +++ b/fs/xfs/libxfs/xfs_inode_buf.c
> >> @@ -45,6 +45,17 @@ xfs_inode_buf_verify(
> >>  	int		i;
> >>  	int		ni;
> >>  
> >> +	/*
> >> +	 * Don't crash and mark buffer EFSCORRUPTED when b_pages is NULL
> >> +	 */
> >> +	if (!bp->b_pages) {
> >> +		xfs_buf_ioerror(bp, -EFSCORRUPTED);
> >> +		xfs_alert(mp,
> >> +			"xfs_buf(%p) b_pages corruption detected at %pS\n",
> >> +			bp, __return_address);
> >> +		return;
> >> +	}
> 
> >This seems fairly ad hoc.
> 
> >I think we need a better idea of how we got here; why should inode buffers
> >be uniquely impacted (or defensively protected?)  Can you reproduce this
> >using virtual devices so the test can be scripted?
> 
> Hi, we have confirmed through the systemtap instrumentation of ioerror that 
> the issue is related to the cleanup logic for xfs_log_item->li_flags in the 
> xfs_buf_resubmit_failed_buffers function. 
> 
> As described in commit d43aaf1685aa471f0593685c9f54d53e3af3cf3f: 
> if we clear the log item failed state before queuing the buffer for IO 
> we can release all active references to the buffer and free it, 
> leading to use after free problems in xfs_buf_delwri_queue.
> 
> If we trigger dropcache between xfs_clear_li_failed and xfs_buf_delwri_queue,
> as no one holds the xfs_buf, the xfs_buf is released.

Er... doesn't bp->b_pages==NULL imply that bp is now a stale pointer?

--D

> Currently, after incorporating the modifications, the issue has not reoccurred.
> 
> --
> Thanks, 
> 
> Fengfei.Xi
> 

      reply	other threads:[~2024-05-01 22:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-24  9:51 [PATCH] xfs: fix system crash caused by null bp->b_pages Fengfei Xi
2020-12-24 19:35 ` Eric Sandeen
2021-09-21 22:48   ` Rustam Kovhaev
2021-09-22  1:48     ` Dave Chinner
2021-09-25  2:16       ` Rustam Kovhaev
2024-04-28  3:44   ` Fengfei Xi
2024-05-01 22:59     ` Darrick J. Wong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240501225942.GN360919@frogsfrogsfrogs \
    --to=djwong@kernel.org \
    --cc=darrick.wong@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=sandeen@sandeen.net \
    --cc=tian.xianting@h3c.com \
    --cc=xi.fengfei@h3c.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).