From: Andrew Jeffery <andrew@codeconstruct.com.au>
To: wim@linux-watchdog.org, linux@roeck-us.net
Cc: Andrew Jeffery <andrew@codeconstruct.com.au>,
robh@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, joel@jms.id.au, zev@bewilderbeest.net,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
Date: Tue, 2 Apr 2024 22:31:18 +1030 [thread overview]
Message-ID: <20240402120118.282035-1-andrew@codeconstruct.com.au> (raw)
Squash warnings such as:
```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
```
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
.../bindings/watchdog/aspeed,ast2400-wdt.yaml | 130 ++++++++++++++++++
.../bindings/watchdog/aspeed-wdt.txt | 73 ----------
2 files changed, 130 insertions(+), 73 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
new file mode 100644
index 000000000000..10fcb50c4051
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed watchdog timer controllers
+
+maintainers:
+ - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-wdt
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks: true
+
+ aspeed,reset-type:
+ enum:
+ - cpu
+ - soc
+ - system
+ - none
+ description: |
+ Reset behaviour - The watchdog can be programmed to generate one of three
+ different types of reset when a timeout occcurs.
+
+ Specifying 'cpu' will only reset the processor on a timeout event.
+
+ Specifying 'soc' will reset a configurable subset of the SoC's controllers
+ on a timeout event. Controllers critical to the SoC's operation may remain untouched.
+
+ Specifying 'system' will reset all controllers on a timeout event, as if EXTRST had been asserted.
+ Specifying "none" will cause the timeout event to have no reset effect.
+ Another watchdog engine on the chip must be used for chip reset operations.
+
+ The default reset type is "system"
+
+ aspeed,alt-boot:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Direct the watchdog to configure the SoC to boot from the alternative boot
+ region if a timeout occurs.
+
+ aspeed,external-signal:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Assert the timeout event on an external signal pin associated with the
+ watchdog controller instance. The pin must be muxed appropriately.
+
+ aspeed,ext-pulse-duration:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The duration, in microseconds, of the pulse emitted on the external signal pin
+
+ aspeed,ext-push-pull:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ If aspeed,external-signal is specified in the node, set the external
+ signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
+ specified then the pin is configured as open-drain.
+
+ aspeed,ext-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ If both aspeed,external-signal and aspeed,ext-push-pull are specified in
+ the node, set the pulse polarity to active-high. If aspeed,ext-active-high
+ is not specified then the pin is configured as active-low.
+
+ aspeed,reset-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ description: |
+ A bitmaks indicating which peripherals will be reset if the watchdog
+ timer expires. On AST2500 SoCs this should be a single word defined using
+ the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
+ array with the first word defined using the AST2600_WDT_RESET1_* macros,
+ and the second word defined using the AST2600_WDT_RESET2_* macros.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ anyOf:
+ - required:
+ - aspeed,ext-push-pull
+ - required:
+ - aspeed,ext-active-high
+ - required:
+ - aspeed,reset-mask
+ then:
+ properties:
+ compatible:
+ enum:
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+ - if:
+ required:
+ - aspeed,ext-active-high
+ then:
+ required:
+ - aspeed,ext-push-pull
+
+additionalProperties: false
+
+examples:
+ - |
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785000 0x1c>;
+ aspeed,reset-type = "system";
+ aspeed,external-signal;
+ };
+ - |
+ #include <dt-bindings/watchdog/aspeed-wdt.h>
+ wdt2: watchdog@1e785040 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785040 0x40>;
+ aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+ (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
deleted file mode 100644
index 3208adb3e52e..000000000000
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Aspeed Watchdog Timer
-
-Required properties:
- - compatible: must be one of:
- - "aspeed,ast2400-wdt"
- - "aspeed,ast2500-wdt"
- - "aspeed,ast2600-wdt"
-
- - reg: physical base address of the controller and length of memory mapped
- region
-
-Optional properties:
-
- - aspeed,reset-type = "cpu|soc|system|none"
-
- Reset behavior - Whenever a timeout occurs the watchdog can be programmed
- to generate one of three different, mutually exclusive, types of resets.
-
- Type "none" can be specified to indicate that no resets are to be done.
- This is useful in situations where another watchdog engine on chip is
- to perform the reset.
-
- If 'aspeed,reset-type=' is not specified the default is to enable system
- reset.
-
- Reset types:
-
- - cpu: Reset CPU on watchdog timeout
-
- - soc: Reset 'System on Chip' on watchdog timeout
-
- - system: Reset system on watchdog timeout
-
- - none: No reset is performed on timeout. Assumes another watchdog
- engine is responsible for this.
-
- - aspeed,alt-boot: If property is present then boot from alternate block.
- - aspeed,external-signal: If property is present then signal is sent to
- external reset counter (only WDT1 and WDT2). If not
- specified no external signal is sent.
- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
-
-Optional properties for AST2500-compatible watchdogs:
- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
- drive type to push-pull. The default is open-drain.
- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
- is configured as push-pull, then set the pulse
- polarity to active-high. The default is active-low.
-
-Optional properties for AST2500- and AST2600-compatible watchdogs:
- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
- the watchdog timer expires. On AST2500 this should be a
- single word defined using the AST2500_WDT_RESET_* macros;
- on AST2600 this should be a two-word array with the first
- word defined using the AST2600_WDT_RESET1_* macros and the
- second word defined using the AST2600_WDT_RESET2_* macros.
-
-Examples:
-
- wdt1: watchdog@1e785000 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785000 0x1c>;
- aspeed,reset-type = "system";
- aspeed,external-signal;
- };
-
- #include <dt-bindings/watchdog/aspeed-wdt.h>
- wdt2: watchdog@1e785040 {
- compatible = "aspeed,ast2600-wdt";
- reg = <0x1e785040 0x40>;
- aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
- (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
- };
--
2.39.2
next reply other threads:[~2024-04-02 12:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-02 12:01 Andrew Jeffery [this message]
2024-04-02 18:07 ` [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema Rob Herring
2024-04-02 23:10 ` Andrew Jeffery
2024-04-02 23:30 ` Zev Weiss
2024-04-02 23:39 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240402120118.282035-1-andrew@codeconstruct.com.au \
--to=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=wim@linux-watchdog.org \
--cc=zev@bewilderbeest.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).