From: Andre Przywara <andre.przywara@arm.com>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: u-boot@lists.denx.de, linux-sunxi@lists.linux.dev,
Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Subject: [PATCH 4/4] sunxi: H616: add Tanix TX1 support
Date: Wed, 24 Apr 2024 01:18:08 +0100 [thread overview]
Message-ID: <20240424001808.14388-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20240424001808.14388-1-andre.przywara@arm.com>
The Tanix TX1 is a tiny TV box, featuring the Allwinner H313 SoC with up
to 2GB of DRAM and 16GB of eMMC. There is no SD card or Ethernet port on
this small device, but it can be booted via the USB debug "FEL" mode.
The bootloader could then be written to the eMMC.
Add the defconfig for that board, and add the devicetree file to the
Makefile, for it to be built.
The DRAM parameters were taken from the vendor firmware on the eMMC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm/dts/Makefile | 1 +
configs/tanix_tx1_defconfig | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 configs/tanix_tx1_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 127345975ef..69b0d6a9ad7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -779,6 +779,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_MACH_SUN50I_H616) += \
+ sun50i-h313-tanix-tx1.dtb \
sun50i-h616-orangepi-zero2.dtb \
sun50i-h618-orangepi-zero2w.dtb \
sun50i-h618-orangepi-zero3.dtb \
diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
new file mode 100644
index 00000000000..9915fff4a00
--- /dev/null
+++ b/configs/tanix_tx1_defconfig
@@ -0,0 +1,25 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee
+CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469
+CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d
+CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR3=y
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_AXP313_POWER=y
+CONFIG_AXP_DCDC3_VOLT=1200
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
--
2.35.8
prev parent reply other threads:[~2024-04-24 0:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-24 0:18 [PATCH 0/4] sunxi: devicetree updates plus new boards Andre Przywara
2024-04-24 0:18 ` [PATCH 1/4] sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9-rc4 Andre Przywara
2024-04-24 0:18 ` [PATCH 2/4] sunxi: a64: Add Remix Mini PC support Andre Przywara
2024-04-24 0:18 ` [PATCH 3/4] [DO NOT MERGE] sunxi: dts: arm64: add Tanix TX1 DT from Linux Andre Przywara
2024-04-24 0:18 ` Andre Przywara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240424001808.14388-5-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=piotr.oniszczuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).