From: "Ondřej Jirman" <megi@xff.cz>
To: linux-kernel@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megi@xff.cz>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Arnaud Ferraris <arnaud.ferraris@collabora.com>,
linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-sunxi@lists.linux.dev
Subject: [RESEND PATCH v2 0/5] Add support for jack detection to codec present in A64 SoC
Date: Sat, 24 Feb 2024 14:54:53 +0100 [thread overview]
Message-ID: <20240224135501.3822390-1-megi@xff.cz> (raw)
From: Ondrej Jirman <megi@xff.cz>
This series adds support for jack detection to this codec. I used
and tested this on Pinephone. It works quite nicely. I tested it
against Android headset mic button resistor specification.
The patches are improved and debugged version of the original
ones from Arnaud Ferraris and Samuel Holland, imrpoved to better
handle headset button presses and with more robust plug-in/out
event debouncing.
Please take a look. :)
v2:
- use set_jack/get_jack_type
- get rid of some custom poking inside card internals to figure
out what kind of jack port we should setup the codec for
- read jack-type from OF as suggested here:
https://elixir.bootlin.com/linux/latest/source/sound/soc/soc-component.c#L288
- add DT bindings
Thank you very much,
Ondřej Jirman
Arnaud Ferraris (2):
ASoC: sun50i-codec-analog: Enable jack detection on startup
ASoC: sun8i-codec: Implement jack and accessory detection
Ondrej Jirman (1):
dt-bindings: sound: Add jack-type property to sun8i-a33-codec
Samuel Holland (2):
ASoC: sun50i-codec-analog: Move suspend/resume to set_bias_level
ASoC: sun8i-codec: Enable bus clock at STANDBY and higher bias
.../sound/allwinner,sun8i-a33-codec.yaml | 9 +
sound/soc/sunxi/sun50i-codec-analog.c | 73 +++-
sound/soc/sunxi/sun8i-codec.c | 359 +++++++++++++++++-
3 files changed, 421 insertions(+), 20 deletions(-)
--
2.43.0
next reply other threads:[~2024-02-24 13:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-24 13:54 Ondřej Jirman [this message]
2024-02-24 13:54 ` [RESEND PATCH v2 1/5] dt-bindings: sound: Add jack-type property to sun8i-a33-codec Ondřej Jirman
2024-02-26 19:47 ` Rob Herring
2024-02-26 23:57 ` Ondřej Jirman
2024-03-01 21:36 ` Rob Herring
2024-02-24 13:54 ` [RESEND PATCH v2 2/5] ASoC: sun50i-codec-analog: Move suspend/resume to set_bias_level Ondřej Jirman
2024-02-24 13:54 ` [RESEND PATCH v2 3/5] ASoC: sun8i-codec: Enable bus clock at STANDBY and higher bias Ondřej Jirman
2024-02-24 13:54 ` [RESEND PATCH v2 4/5] ASoC: sun50i-codec-analog: Enable jack detection on startup Ondřej Jirman
2024-02-24 13:54 ` [RESEND PATCH v2 5/5] ASoC: sun8i-codec: Implement jack and accessory detection Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240224135501.3822390-1-megi@xff.cz \
--to=megi@xff.cz \
--cc=arnaud.ferraris@collabora.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).