From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-spi@vger.kernel.org, broonie@kernel.org,
andi.shyti@kernel.org, joel@jms.id.au, alistair@popple.id.au,
jk@ozlabs.org, andrew@codeconstruct.com.au,
linux-aspeed@lists.ozlabs.org, eajames@linux.ibm.com
Subject: [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency
Date: Thu, 16 May 2024 13:19:06 -0500 [thread overview]
Message-ID: <20240516181907.3468796-40-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240516181907.3468796-1-eajames@linux.ibm.com>
Now that the driver doesn't hardcode the clock divider, set it
in the device tree.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 1 +
arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 213023bc5aec4..96a8f727bc389 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -193,6 +193,7 @@ &fsim0 {
#address-cells = <2>;
#size-cells = <0>;
+ clock-frequency = <100000000>;
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 07ce3b2bc62a3..44e48e39e6e96 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -8,6 +8,7 @@ &fsim0 {
#size-cells = <0>;
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ clock-frequency = <100000000>;
cfam@0,0 {
reg = <0 0>;
--
2.39.3
next prev parent reply other threads:[~2024-05-16 18:19 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-16 18:18 [PATCH v3 00/40] fsi: Add interrupt support Eddie James
2024-05-16 18:18 ` [PATCH v3 01/40] fsi: hub: Set master index to link number plus one Eddie James
2024-05-16 18:18 ` [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-05-16 18:18 ` [PATCH v3 03/40] fsi: Fix slave addressing after break command Eddie James
2024-05-16 18:18 ` [PATCH v3 04/40] fsi: Use a defined value for default echo delay Eddie James
2024-05-16 18:18 ` [PATCH v3 05/40] fsi: Calculate local bus clock frequency Eddie James
2024-05-16 18:18 ` [PATCH v3 06/40] fsi: core: Improve master read/write/error traces Eddie James
2024-05-16 18:18 ` [PATCH v3 07/40] fsi: core: Add slave error trace Eddie James
2024-05-16 18:18 ` [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts Eddie James
2024-05-16 18:18 ` [PATCH v3 09/40] fsi: aspeed: Add AST2700 support Eddie James
2024-05-16 18:18 ` [PATCH v3 10/40] fsi: core: Add slave spinlock Eddie James
2024-05-16 18:18 ` [PATCH v3 11/40] fsi: core: Allow cfam device type aliases Eddie James
2024-05-16 18:18 ` [PATCH v3 12/40] fsi: core: Add common regmap master functions Eddie James
2024-05-16 18:18 ` [PATCH v3 13/40] fsi: core: Disable relative addressing during scan Eddie James
2024-05-16 18:18 ` [PATCH v3 14/40] fsi: hub: Use common initialization and link enable Eddie James
2024-05-16 18:18 ` [PATCH v3 15/40] fsi: aspeed: " Eddie James
2024-05-16 18:18 ` [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-05-16 18:18 ` [PATCH v3 17/40] fsi: aspeed: Refactor trace functions Eddie James
2024-05-16 18:18 ` [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-05-16 18:18 ` [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read Eddie James
2024-05-16 18:18 ` [PATCH v3 20/40] fsi: aspeed: Switch to spinlock Eddie James
2024-05-16 18:18 ` [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-05-16 18:18 ` [PATCH v3 22/40] fsi: aspeed: Use common master error handler Eddie James
2024-05-16 18:18 ` [PATCH v3 23/40] fsi: core: Add interrupt support Eddie James
2024-05-17 20:41 ` kernel test robot
2024-05-16 18:18 ` [PATCH v3 24/40] fsi: aspeed: " Eddie James
2024-05-16 18:18 ` [PATCH v3 25/40] fsi: hub: " Eddie James
2024-05-16 18:18 ` [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-05-16 18:18 ` [PATCH v3 27/40] i2c: fsi: Improve formatting Eddie James
2024-05-16 18:18 ` [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-05-16 18:18 ` [PATCH v3 29/40] i2c: fsi: Remove list structure of ports Eddie James
2024-05-16 18:18 ` [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits Eddie James
2024-05-16 18:18 ` [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-05-16 18:18 ` [PATCH v3 32/40] i2c: fsi: Add interrupt support Eddie James
2024-05-16 18:19 ` [PATCH v3 33/40] fsi: hub master: Reset hub master after errors Eddie James
2024-05-16 18:19 ` [PATCH v3 34/40] fsi: core: Add master register read-only sysfs Eddie James
2024-05-16 18:19 ` [PATCH v3 35/40] fsi: core: Add slave " Eddie James
2024-05-16 18:19 ` [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip Eddie James
2024-05-16 18:19 ` [PATCH v3 37/40] fsi: core: Add different types of CFAM Eddie James
2024-05-17 12:38 ` kernel test robot
2024-05-17 15:49 ` kernel test robot
2024-05-18 1:03 ` kernel test robot
2024-05-16 18:19 ` [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency Eddie James
2024-05-16 18:24 ` Mark Brown
2024-05-16 18:19 ` Eddie James [this message]
2024-05-16 18:19 ` [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240516181907.3468796-40-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=broonie@kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).