From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Derek Fang <derek.fang@realtek.com>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
oder_chiou@realtek.com, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.com, linux-sound@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 02/15] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating
Date: Tue, 7 May 2024 19:13:11 -0400 [thread overview]
Message-ID: <20240507231333.394765-2-sashal@kernel.org> (raw)
In-Reply-To: <20240507231333.394765-1-sashal@kernel.org>
From: Derek Fang <derek.fang@realtek.com>
[ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ]
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 2cc3d814bab41..5a44f5201515b 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -441,6 +441,7 @@ struct rt5645_priv {
struct regmap *regmap;
struct i2c_client *i2c;
struct gpio_desc *gpiod_hp_det;
+ struct gpio_desc *gpiod_cbj_sleeve;
struct snd_soc_jack *hp_jack;
struct snd_soc_jack *mic_jack;
struct snd_soc_jack *btn_jack;
@@ -3179,6 +3180,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
RT5645_CBJ_MN_JD, 0);
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1);
+
msleep(600);
regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val);
val &= 0x7;
@@ -3195,6 +3199,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
snd_soc_dapm_sync(dapm);
rt5645->jack_type = SND_JACK_HEADPHONE;
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}
if (rt5645->pdata.level_trigger_irq)
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
@@ -3220,6 +3226,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
if (rt5645->pdata.level_trigger_irq)
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
+
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}
return rt5645->jack_type;
@@ -3933,6 +3942,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve",
+ GPIOD_OUT_LOW);
+
+ if (IS_ERR(rt5645->gpiod_cbj_sleeve)) {
+ ret = PTR_ERR(rt5645->gpiod_cbj_sleeve);
+ dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret);
+ if (ret != -ENOENT)
+ return ret;
+ }
+
for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++)
rt5645->supplies[i].supply = rt5645_supply_names[i];
@@ -4176,6 +4195,9 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
cancel_delayed_work_sync(&rt5645->jack_detect_work);
cancel_delayed_work_sync(&rt5645->rcclock_work);
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
+
regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
return 0;
@@ -4193,6 +4215,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c)
0);
msleep(20);
regmap_write(rt5645->regmap, RT5645_RESET, 0);
+
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}
static struct i2c_driver rt5645_i2c_driver = {
--
2.43.0
next parent reply other threads:[~2024-05-07 23:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240507231333.394765-1-sashal@kernel.org>
2024-05-07 23:13 ` Sasha Levin [this message]
2024-05-07 23:13 ` [PATCH AUTOSEL 5.15 03/15] ASoC: dt-bindings: rt5645: add cbj sleeve gpio property Sasha Levin
2024-05-07 23:13 ` [PATCH AUTOSEL 5.15 05/15] ASoC: rt715: add vendor clear control register Sasha Levin
2024-05-07 23:13 ` [PATCH AUTOSEL 5.15 06/15] ASoC: rt715-sdca: volume step modification Sasha Levin
2024-05-07 23:13 ` [PATCH AUTOSEL 5.15 10/15] ASoC: da7219-aad: fix usage of device_get_named_child_node() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240507231333.394765-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=derek.fang@realtek.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).