From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
shengjiu.wang@gmail.com, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Xiubo.Lee@gmail.com, festevam@gmail.com, nicoleotsuka@gmail.com,
perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 2/2] ASoC: fsl_xcvr: Add support for i.MX95 platform
Date: Tue, 14 May 2024 11:12:09 +0800 [thread overview]
Message-ID: <1715656329-8061-3-git-send-email-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <1715656329-8061-1-git-send-email-shengjiu.wang@nxp.com>
On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.
The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.
When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
---
sound/soc/fsl/Kconfig | 1 +
sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++++++++++++++++-------------
sound/soc/fsl/fsl_xcvr.h | 91 ++++++++++++++++++++++++++++
3 files changed, 177 insertions(+), 43 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 270726c134b3..9a371d4496c2 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -103,6 +103,7 @@ config SND_SOC_FSL_XCVR
select REGMAP_MMIO
select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
select SND_SOC_GENERIC_DMAENGINE_PCM
+ select SND_SOC_FSL_UTILS
help
Say Y if you want to add Audio Transceiver (XCVR) support for NXP
iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC,
diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index c46f64557a7f..6b1715ac67c5 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -15,14 +15,22 @@
#include <sound/pcm_params.h>
#include "fsl_xcvr.h"
+#include "fsl_utils.h"
#include "imx-pcm.h"
#define FSL_XCVR_CAPDS_SIZE 256
+enum fsl_xcvr_pll_verison {
+ PLL_MX8MP,
+ PLL_MX95,
+};
+
struct fsl_xcvr_soc_data {
const char *fw_name;
bool spdif_only;
bool use_edma;
+ bool use_phy;
+ enum fsl_xcvr_pll_verison pll_ver;
};
struct fsl_xcvr {
@@ -33,6 +41,8 @@ struct fsl_xcvr {
struct clk *pll_ipg_clk;
struct clk *phy_clk;
struct clk *spba_clk;
+ struct clk *pll8k_clk;
+ struct clk *pll11k_clk;
struct reset_control *reset;
u8 streams;
u32 mode;
@@ -262,10 +272,10 @@ static int fsl_xcvr_ai_write(struct fsl_xcvr *xcvr, u8 reg, u32 data, bool phy)
static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx)
{
struct device *dev = &xcvr->pdev->dev;
- u32 i, div = 0, log2;
+ u32 i, div = 0, log2, val;
int ret;
- if (xcvr->soc_data->spdif_only)
+ if (!xcvr->soc_data->use_phy)
return 0;
for (i = 0; i < ARRAY_SIZE(fsl_xcvr_pll_cfg); i++) {
@@ -288,45 +298,62 @@ static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx)
return ret;
}
- /* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET,
- FSL_XCVR_PLL_BANDGAP_EN_VBG, 0);
-
- /* PLL: CTRL0: DIV_INTEGER */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0);
- /* PLL: NUMERATOR: MFN */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0);
- /* PLL: DENOMINATOR: MFD */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0);
- /* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
- FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0);
- udelay(25);
- /* PLL: CTRL0: Clear Hold Ring Off */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR,
- FSL_XCVR_PLL_CTRL0_HROFF, 0);
- udelay(100);
- if (tx) { /* TX is enabled for SPDIF only */
- /* PLL: POSTDIV: PDIV0 */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
- FSL_XCVR_PLL_PDIVx(log2, 0), 0);
- /* PLL: CTRL_SET: CLKMUX0_EN */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
- FSL_XCVR_PLL_CTRL0_CM0_EN, 0);
- } else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */
- /* PLL: POSTDIV: PDIV1 */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
- FSL_XCVR_PLL_PDIVx(log2, 1), 0);
- /* PLL: CTRL_SET: CLKMUX1_EN */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
- FSL_XCVR_PLL_CTRL0_CM1_EN, 0);
- } else { /* SPDIF / ARC RX */
- /* PLL: POSTDIV: PDIV2 */
- fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
- FSL_XCVR_PLL_PDIVx(log2, 2), 0);
- /* PLL: CTRL_SET: CLKMUX2_EN */
+ switch (xcvr->soc_data->pll_ver) {
+ case PLL_MX8MP:
+ /* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET,
+ FSL_XCVR_PLL_BANDGAP_EN_VBG, 0);
+
+ /* PLL: CTRL0: DIV_INTEGER */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0);
+ /* PLL: NUMERATOR: MFN */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0);
+ /* PLL: DENOMINATOR: MFD */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0);
+ /* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */
fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
- FSL_XCVR_PLL_CTRL0_CM2_EN, 0);
+ FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0);
+ udelay(25);
+ /* PLL: CTRL0: Clear Hold Ring Off */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR,
+ FSL_XCVR_PLL_CTRL0_HROFF, 0);
+ udelay(100);
+ if (tx) { /* TX is enabled for SPDIF only */
+ /* PLL: POSTDIV: PDIV0 */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+ FSL_XCVR_PLL_PDIVx(log2, 0), 0);
+ /* PLL: CTRL_SET: CLKMUX0_EN */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+ FSL_XCVR_PLL_CTRL0_CM0_EN, 0);
+ } else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */
+ /* PLL: POSTDIV: PDIV1 */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+ FSL_XCVR_PLL_PDIVx(log2, 1), 0);
+ /* PLL: CTRL_SET: CLKMUX1_EN */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+ FSL_XCVR_PLL_CTRL0_CM1_EN, 0);
+ } else { /* SPDIF / ARC RX */
+ /* PLL: POSTDIV: PDIV2 */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+ FSL_XCVR_PLL_PDIVx(log2, 2), 0);
+ /* PLL: CTRL_SET: CLKMUX2_EN */
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+ FSL_XCVR_PLL_CTRL0_CM2_EN, 0);
+ }
+ break;
+ case PLL_MX95:
+ val = fsl_xcvr_pll_cfg[i].mfi << FSL_XCVR_GP_PLL_DIV_MFI_SHIFT | div;
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DIV, val, 0);
+ val = fsl_xcvr_pll_cfg[i].mfn << FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT;
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_NUMERATOR, val, 0);
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DENOMINATOR,
+ fsl_xcvr_pll_cfg[i].mfd, 0);
+ val = FSL_XCVR_GP_PLL_CTRL_POWERUP | FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN;
+ fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_CTRL, val, 0);
+ break;
+ default:
+ dev_err(dev, "Error for PLL version %d\n", xcvr->soc_data->pll_ver);
+ return -EINVAL;
}
if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC mode */
@@ -362,6 +389,8 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
freq = xcvr->soc_data->spdif_only ? freq / 5 : freq;
clk_disable_unprepare(xcvr->phy_clk);
+ fsl_asoc_reparent_pll_clocks(dev, xcvr->phy_clk,
+ xcvr->pll8k_clk, xcvr->pll11k_clk, freq);
ret = clk_set_rate(xcvr->phy_clk, freq);
if (ret < 0) {
dev_err(dev, "Error while setting AUD PLL rate: %d\n", ret);
@@ -373,7 +402,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
return ret;
}
- if (xcvr->soc_data->spdif_only)
+ if (!xcvr->soc_data->use_phy)
return 0;
/* Release AI interface from reset */
ret = regmap_write(xcvr->regmap, FSL_XCVR_PHY_AI_CTRL_SET,
@@ -1017,7 +1046,7 @@ static bool fsl_xcvr_readable_reg(struct device *dev, unsigned int reg)
{
struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
- if (xcvr->soc_data->spdif_only)
+ if (!xcvr->soc_data->use_phy)
if ((reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA) ||
reg > FSL_XCVR_TX_DPTH_BCRR)
return false;
@@ -1090,7 +1119,7 @@ static bool fsl_xcvr_writeable_reg(struct device *dev, unsigned int reg)
{
struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
- if (xcvr->soc_data->spdif_only)
+ if (!xcvr->soc_data->use_phy)
if (reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA)
return false;
switch (reg) {
@@ -1234,6 +1263,8 @@ static irqreturn_t irq0_isr(int irq, void *devid)
static const struct fsl_xcvr_soc_data fsl_xcvr_imx8mp_data = {
.fw_name = "imx/xcvr/xcvr-imx8mp.bin",
+ .use_phy = true,
+ .pll_ver = PLL_MX8MP,
};
static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = {
@@ -1241,9 +1272,17 @@ static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = {
.use_edma = true,
};
+static const struct fsl_xcvr_soc_data fsl_xcvr_imx95_data = {
+ .spdif_only = true,
+ .use_phy = true,
+ .use_edma = true,
+ .pll_ver = PLL_MX95,
+};
+
static const struct of_device_id fsl_xcvr_dt_ids[] = {
{ .compatible = "fsl,imx8mp-xcvr", .data = &fsl_xcvr_imx8mp_data },
{ .compatible = "fsl,imx93-xcvr", .data = &fsl_xcvr_imx93_data},
+ { .compatible = "fsl,imx95-xcvr", .data = &fsl_xcvr_imx95_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_xcvr_dt_ids);
@@ -1287,6 +1326,9 @@ static int fsl_xcvr_probe(struct platform_device *pdev)
return PTR_ERR(xcvr->pll_ipg_clk);
}
+ fsl_asoc_get_pll_clocks(dev, &xcvr->pll8k_clk,
+ &xcvr->pll11k_clk);
+
xcvr->ram_addr = devm_platform_ioremap_resource_byname(pdev, "ram");
if (IS_ERR(xcvr->ram_addr))
return PTR_ERR(xcvr->ram_addr);
diff --git a/sound/soc/fsl/fsl_xcvr.h b/sound/soc/fsl/fsl_xcvr.h
index 044058fc6aa2..882428592e1a 100644
--- a/sound/soc/fsl/fsl_xcvr.h
+++ b/sound/soc/fsl/fsl_xcvr.h
@@ -291,4 +291,95 @@
#define FSL_XCVR_RX_CS_BUFF_1 0xA0 /* Second RX CS buffer */
#define FSL_XCVR_CAP_DATA_STR 0x300 /* Capabilities data structure */
+/* GP PLL Registers */
+#define FSL_XCVR_GP_PLL_CTRL 0x00
+#define FSL_XCVR_GP_PLL_CTRL_SET 0x04
+#define FSL_XCVR_GP_PLL_CTRL_CLR 0x08
+#define FSL_XCVR_GP_PLL_CTRL_TOG 0x0C
+#define FSL_XCVR_GP_PLL_ANA_PRG 0x10
+#define FSL_XCVR_GP_PLL_ANA_PRG_SET 0x14
+#define FSL_XCVR_GP_PLL_ANA_PRG_CLR 0x18
+#define FSL_XCVR_GP_PLL_ANA_PRG_TOG 0x1C
+#define FSL_XCVR_GP_PLL_TEST 0x20
+#define FSL_XCVR_GP_PLL_TEST_SET 0x24
+#define FSL_XCVR_GP_PLL_TEST_CLR 0x28
+#define FSL_XCVR_GP_PLL_TEST_TOG 0x2C
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM 0x30
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_SET 0x34
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_CLR 0x38
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_TOG 0x3C
+#define FSL_XCVR_GP_PLL_NUMERATOR 0x40
+#define FSL_XCVR_GP_PLL_NUMERATOR_SET 0x44
+#define FSL_XCVR_GP_PLL_NUMERATOR_CLR 0x48
+#define FSL_XCVR_GP_PLL_NUMERATOR_TOG 0x4C
+#define FSL_XCVR_GP_PLL_DENOMINATOR 0x50
+#define FSL_XCVR_GP_PLL_DENOMINATOR_SET 0x54
+#define FSL_XCVR_GP_PLL_DENOMINATOR_CLR 0x58
+#define FSL_XCVR_GP_PLL_DENOMINATOR_TOG 0x5C
+#define FSL_XCVR_GP_PLL_DIV 0x60
+#define FSL_XCVR_GP_PLL_DIV_SET 0x64
+#define FSL_XCVR_GP_PLL_DIV_CLR 0x68
+#define FSL_XCVR_GP_PLL_DIV_TOG 0x6C
+#define FSL_XCVR_GP_PLL_DFS_CTRL0 0x70
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_SET 0x74
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_CLR 0x78
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_TOG 0x7C
+#define FSL_XCVR_GP_PLL_DFS_DIV0 0x80
+#define FSL_XCVR_GP_PLL_DFS_DIV0_SET 0x84
+#define FSL_XCVR_GP_PLL_DFS_DIV0_CLR 0x88
+#define FSL_XCVR_GP_PLL_DFS_DIV0_TOG 0x8C
+#define FSL_XCVR_GP_PLL_DFS_CTRL1 0x90
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_SET 0x94
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_CLR 0x98
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_TOG 0x9C
+#define FSL_XCVR_GP_PLL_DFS_DIV1 0xA0
+#define FSL_XCVR_GP_PLL_DFS_DIV1_SET 0xA4
+#define FSL_XCVR_GP_PLL_DFS_DIV1_CLR 0xA8
+#define FSL_XCVR_GP_PLL_DFS_DIV1_TOG 0xAC
+#define FSL_XCVR_GP_PLL_DFS_CTRL2 0xB0
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_SET 0xB4
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_CLR 0xB8
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_TOG 0xBC
+#define FSL_XCVR_GP_PLL_DFS_DIV2 0xC0
+#define FSL_XCVR_GP_PLL_DFS_DIV2_SET 0xC4
+#define FSL_XCVR_GP_PLL_DFS_DIV2_CLR 0xC8
+#define FSL_XCVR_GP_PLL_DFS_DIV2_TOG 0xCC
+#define FSL_XCVR_GP_PLL_DFS_CTRL3 0xD0
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_SET 0xD4
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_CLR 0xD8
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_TOG 0xDC
+#define FSL_XCVR_GP_PLL_DFS_DIV3 0xE0
+#define FSL_XCVR_GP_PLL_DFS_DIV3_SET 0xE4
+#define FSL_XCVR_GP_PLL_DFS_DIV3_CLR 0xE8
+#define FSL_XCVR_GP_PLL_DFS_DIV3_TOG 0xEC
+#define FSL_XCVR_GP_PLL_STATUS 0xF0
+#define FSL_XCVR_GP_PLL_STATUS_SET 0xF4
+#define FSL_XCVR_GP_PLL_STATUS_CLR 0xF8
+#define FSL_XCVR_GP_PLL_STATUS_TOG 0xFC
+
+/* GP PLL Control Register */
+#define FSL_XCVR_GP_PLL_CTRL_LBYPASS BIT(31)
+#define FSL_XCVR_GP_PLL_CTRL_HCS BIT(16)
+#define FSL_XCVR_GP_PLL_CTRL_MSD BIT(12)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN3 BIT(11)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN2 BIT(10)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN1 BIT(9)
+#define FSL_XCVR_GP_PLL_CTRL_SPREADCTL BIT(8)
+#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_BYPASS BIT(2)
+#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN BIT(1)
+#define FSL_XCVR_GP_PLL_CTRL_POWERUP BIT(0)
+
+/* GP PLL Numerator Register */
+#define FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT 2
+#define FSL_XCVR_GP_PLL_NUMERATOR_MFN GENMASK(31, 2)
+
+/* GP PLL Denominator Register */
+#define FSL_XCVR_GP_PLL_DENOMINATOR_MFD GENMASK(29, 0)
+
+/* GP PLL Dividers Register */
+#define FSL_XCVR_GP_PLL_DIV_MFI_SHIFT 16
+#define FSL_XCVR_GP_PLL_DIV_MFI GENMASK(24, 16)
+#define FSL_XCVR_GP_PLL_DIV_RDIV GENMASK(15, 13)
+#define FSL_XCVR_GP_PLL_DIV_ODIV GENMASK(7, 0)
+
#endif /* __FSL_XCVR_H */
--
2.34.1
next prev parent reply other threads:[~2024-05-14 3:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 3:12 [PATCH v2 0/2] ASoC: fsl_xcvr: Support i.MX95 platform Shengjiu Wang
2024-05-14 3:12 ` [PATCH v2 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 Shengjiu Wang
2024-05-20 16:16 ` Rob Herring
2024-05-21 3:44 ` Shengjiu Wang
2024-05-14 3:12 ` Shengjiu Wang [this message]
2024-06-05 21:38 ` [PATCH v2 0/2] ASoC: fsl_xcvr: Support i.MX95 platform Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1715656329-8061-3-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).