* An Unexpected IO-APIC was found
@ 2002-10-30 21:31 Jonathan Thorpe
0 siblings, 0 replies; 31+ messages in thread
From: Jonathan Thorpe @ 2002-10-30 21:31 UTC (permalink / raw
To: linux-smp
Greetings,
Recently, I have been working with an Epox 8K5A2+ (VIA KT333) motherboard which has been nothing but trouble, despite working with Epox to resolve the problem. For the most part, the board works fine, but the onboard VIA USB 2.0 controller fails, possibly due to the IRQ assignments. We have also had problems with the BIOS not being able to assign IRQs to all devices and the floppy drive has problems writing to disks.
We are using the latest Award BIOS released by Epox and noticed that there was a message in the logs indicating that that there's "An unexpected IO-APIC was found". Since this kernel is less than three months old, I herewith attach the Kernel logs.
If there's any other information you need or anything I can do, please let me know.
Thanks,
Jonathan
---------------
Oct 30 02:13:17 Webdesktop kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 30 02:13:17 Webdesktop kernel: Cannot find map file.
Oct 30 02:13:17 Webdesktop kernel: No module symbols loaded.
Oct 30 02:13:17 Webdesktop kernel: Linux version 2.4.20-pre10-ac1 (root@athlon) (gcc version 2.95.2.1 19991024 (release)) #3 SMP Mon Oct 14 09:04:13 EST 2002
Oct 30 02:13:17 Webdesktop kernel: BIOS-provided physical RAM map:
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 30 02:13:17 Webdesktop kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 30 02:13:17 Webdesktop kernel: 256MB LOWMEM available.
Oct 30 02:13:17 Webdesktop kernel: found SMP MP-table at 000f5d60
Oct 30 02:13:17 Webdesktop kernel: hm, page 000f5000 reserved twice.
Oct 30 02:13:17 Webdesktop kernel: hm, page 000f6000 reserved twice.
Oct 30 02:13:17 Webdesktop kernel: hm, page 000f1000 reserved twice.
Oct 30 02:13:17 Webdesktop kernel: hm, page 000f2000 reserved twice.
Oct 30 02:13:17 Webdesktop kernel: On node 0 totalpages: 65536
Oct 30 02:13:17 Webdesktop kernel: zone(0): 4096 pages.
Oct 30 02:13:17 Webdesktop kernel: zone(1): 61440 pages.
Oct 30 02:13:17 Webdesktop kernel: zone(2): 0 pages.
Oct 30 02:13:17 Webdesktop kernel: Intel MultiProcessor Specification v1.4
Oct 30 02:13:17 Webdesktop kernel: Virtual Wire compatibility mode.
Oct 30 02:13:17 Webdesktop kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Oct 30 02:13:17 Webdesktop kernel: Processor #0 Pentium(tm) Pro APIC version 17
Oct 30 02:13:17 Webdesktop kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Oct 30 02:13:17 Webdesktop kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 30 02:13:17 Webdesktop kernel: Processors: 1
Oct 30 02:13:17 Webdesktop kernel: Kernel command line: BOOT_IMAGE=Webdesktop ro root=342 nobiospnp
Oct 30 02:13:17 Webdesktop kernel: Initializing CPU#0
Oct 30 02:13:17 Webdesktop kernel: Detected 1357.489 MHz processor.
Oct 30 02:13:17 Webdesktop kernel: Console: colour dummy device 80x25
Oct 30 02:13:17 Webdesktop kernel: Calibrating delay loop... 2706.63 BogoMIPS
Oct 30 02:13:17 Webdesktop kernel: Memory: 253436k/262144k available (1625k kernel code, 6272k reserved, 624k data, 128k init, 0k highmem)
Oct 30 02:13:17 Webdesktop kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 30 02:13:17 Webdesktop kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 30 02:13:17 Webdesktop kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 30 02:13:17 Webdesktop kernel: ramfs: mounted with options: <defaults>
Oct 30 02:13:17 Webdesktop kernel: ramfs: max_pages=31935 max_file_pages=0 max_inodes=0 max_dentries=31935
Oct 30 02:13:17 Webdesktop kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct 30 02:13:17 Webdesktop kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 30 02:13:17 Webdesktop kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 30 02:13:17 Webdesktop kernel: CPU: L2 Cache: 256K (64 bytes/line)
Oct 30 02:13:17 Webdesktop kernel: Intel machine check architecture supported.
Oct 30 02:13:17 Webdesktop kernel: Intel machine check reporting enabled on CPU#0.
Oct 30 02:13:17 Webdesktop kernel: CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Oct 30 02:13:17 Webdesktop kernel: CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Oct 30 02:13:17 Webdesktop kernel: Enabling fast FPU save and restore... done.
Oct 30 02:13:17 Webdesktop kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 30 02:13:17 Webdesktop kernel: Checking 'hlt' instruction... OK.
Oct 30 02:13:17 Webdesktop kernel: POSIX conformance testing by UNIFIX
Oct 30 02:13:17 Webdesktop kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 30 02:13:17 Webdesktop kernel: mtrr: detected mtrr type: Intel
Oct 30 02:13:17 Webdesktop kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 30 02:13:17 Webdesktop kernel: CPU: L2 Cache: 256K (64 bytes/line)
Oct 30 02:13:17 Webdesktop kernel: Intel machine check reporting enabled on CPU#0.
Oct 30 02:13:17 Webdesktop kernel: CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
Oct 30 02:13:17 Webdesktop kernel: CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Oct 30 02:13:17 Webdesktop kernel: CPU0: AMD Athlon(tm) XP 1500+ stepping 00
Oct 30 02:13:17 Webdesktop kernel: per-CPU timeslice cutoff: 731.32 usecs.
Oct 30 02:13:17 Webdesktop kernel: task migration cache decay timeout: 10 msecs.
Oct 30 02:13:17 Webdesktop kernel: enabled ExtINT on CPU#0
Oct 30 02:13:17 Webdesktop kernel: ESR value before enabling vector: 00000000
Oct 30 02:13:17 Webdesktop kernel: ESR value after enabling vector: 00000000
Oct 30 02:13:17 Webdesktop kernel: Error: only one processor found.
Oct 30 02:13:17 Webdesktop kernel: ENABLING IO-APIC IRQs
Oct 30 02:13:17 Webdesktop kernel: Setting 2 in the phys_id_present_map
Oct 30 02:13:17 Webdesktop kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Oct 30 02:13:17 Webdesktop kernel: init IO_APIC IRQs
Oct 30 02:13:17 Webdesktop kernel: IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Oct 30 02:13:17 Webdesktop kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Oct 30 02:13:17 Webdesktop kernel: number of MP IRQ sources: 19.
Oct 30 02:13:17 Webdesktop kernel: number of IO-APIC #2 registers: 24.
Oct 30 02:13:17 Webdesktop kernel: testing the IO APIC.......................
Oct 30 02:13:17 Webdesktop kernel:
Oct 30 02:13:17 Webdesktop kernel: IO APIC #2......
Oct 30 02:13:17 Webdesktop kernel: .... register #00: 02000000
Oct 30 02:13:17 Webdesktop kernel: ....... : physical APIC id: 02
Oct 30 02:13:17 Webdesktop kernel: .... register #01: 00178003
Oct 30 02:13:17 Webdesktop kernel: ....... : max redirection entries: 0017
Oct 30 02:13:17 Webdesktop kernel: ....... : PRQ implemented: 1
Oct 30 02:13:17 Webdesktop kernel: ....... : IO APIC version: 0003
Oct 30 02:13:17 Webdesktop kernel: An unexpected IO-APIC was found. If this kernel release is less than
Oct 30 02:13:17 Webdesktop kernel: three months old please report this to linux-smp@vger.kernel.org
Oct 30 02:13:17 Webdesktop kernel: .... IRQ redirection table:
Oct 30 02:13:17 Webdesktop kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Oct 30 02:13:17 Webdesktop kernel: 00 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 01 001 01 0 0 0 0 0 1 1 39
Oct 30 02:13:17 Webdesktop kernel: 02 001 01 0 0 0 0 0 1 1 31
Oct 30 02:13:17 Webdesktop kernel: 03 001 01 0 0 0 0 0 1 1 41
Oct 30 02:13:17 Webdesktop kernel: 04 001 01 0 0 0 0 0 1 1 49
Oct 30 02:13:17 Webdesktop kernel: 05 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 06 001 01 0 0 0 0 0 1 1 51
Oct 30 02:13:17 Webdesktop kernel: 07 001 01 0 0 0 0 0 1 1 59
Oct 30 02:13:17 Webdesktop kernel: 08 001 01 0 0 0 0 0 1 1 61
Oct 30 02:13:17 Webdesktop kernel: 09 001 01 0 0 0 0 0 1 1 69
Oct 30 02:13:17 Webdesktop kernel: 0a 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 0b 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 0c 001 01 0 0 0 0 0 1 1 71
Oct 30 02:13:17 Webdesktop kernel: 0d 001 01 0 0 0 0 0 1 1 79
Oct 30 02:13:17 Webdesktop kernel: 0e 001 01 0 0 0 0 0 1 1 81
Oct 30 02:13:17 Webdesktop kernel: 0f 001 01 0 0 0 0 0 1 1 89
Oct 30 02:13:17 Webdesktop kernel: 10 001 01 1 1 0 1 0 1 1 91
Oct 30 02:13:17 Webdesktop kernel: 11 001 01 1 1 0 1 0 1 1 99
Oct 30 02:13:17 Webdesktop kernel: 12 001 01 1 1 0 1 0 1 1 A1
Oct 30 02:13:17 Webdesktop kernel: 13 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 14 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 15 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 16 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: 17 000 00 1 0 0 0 0 0 0 00
Oct 30 02:13:17 Webdesktop kernel: IRQ to pin mappings:
Oct 30 02:13:17 Webdesktop kernel: IRQ0 -> 0:2
Oct 30 02:13:17 Webdesktop kernel: IRQ1 -> 0:1
Oct 30 02:13:17 Webdesktop kernel: IRQ3 -> 0:3
Oct 30 02:13:17 Webdesktop kernel: IRQ4 -> 0:4
Oct 30 02:13:17 Webdesktop kernel: IRQ6 -> 0:6
Oct 30 02:13:17 Webdesktop kernel: IRQ7 -> 0:7
Oct 30 02:13:17 Webdesktop kernel: IRQ8 -> 0:8
Oct 30 02:13:17 Webdesktop kernel: IRQ9 -> 0:9
Oct 30 02:13:17 Webdesktop kernel: IRQ12 -> 0:12
Oct 30 02:13:17 Webdesktop kernel: IRQ13 -> 0:13
Oct 30 02:13:17 Webdesktop kernel: IRQ14 -> 0:14
Oct 30 02:13:17 Webdesktop kernel: IRQ15 -> 0:15
Oct 30 02:13:17 Webdesktop kernel: IRQ16 -> 0:16
Oct 30 02:13:17 Webdesktop kernel: IRQ17 -> 0:17
Oct 30 02:13:17 Webdesktop kernel: IRQ18 -> 0:18
Oct 30 02:13:17 Webdesktop kernel: .................................... done.
Oct 30 02:13:17 Webdesktop kernel: Using local APIC timer interrupts.
Oct 30 02:13:17 Webdesktop kernel: calibrating APIC timer ...
Oct 30 02:13:17 Webdesktop kernel: ..... CPU clock speed is 1357.4903 MHz.
Oct 30 02:13:17 Webdesktop kernel: ..... host bus clock speed is 201.1096 MHz.
Oct 30 02:13:17 Webdesktop kernel: cpu: 0, clocks: 2011096, slice: 1005548
Oct 30 02:13:17 Webdesktop kernel: CPU0<T0:2011088,T1:1005536,D:4,S:1005548,C:2011096>
Oct 30 02:13:17 Webdesktop kernel: migration_task 0 on cpu=0
Oct 30 02:13:17 Webdesktop kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
Oct 30 02:13:17 Webdesktop kernel: PCI: Using configuration type 1
Oct 30 02:13:17 Webdesktop kernel: PCI: Probing PCI hardware
Oct 30 02:13:17 Webdesktop kernel: Scanning bus 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:00 [1106/3099] 000600 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:08 [1106/b099] 000604 01
Oct 30 02:13:17 Webdesktop kernel: Found 00:40 [10b7/9200] 000200 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:48 [1000/0001] 000100 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:68 [1033/0035] 000c03 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:69 [1033/0035] 000c03 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:6a [1033/00e0] 000c03 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:88 [1106/3177] 000601 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:89 [1106/0571] 000101 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:8d [1106/3059] 000401 00
Oct 30 02:13:17 Webdesktop kernel: Found 00:90 [1106/3065] 000200 00
Oct 30 02:13:17 Webdesktop kernel: Fixups for bus 00
Oct 30 02:13:17 Webdesktop kernel: Scanning behind PCI bridge 00:01.0, config 010100, pass 0
Oct 30 02:13:17 Webdesktop kernel: Scanning bus 01
Oct 30 02:13:17 Webdesktop kernel: Found 01:00 [10de/002d] 000300 00
Oct 30 02:13:17 Webdesktop kernel: Fixups for bus 01
Oct 30 02:13:17 Webdesktop kernel: Bus scan for 01 returning with max=01
Oct 30 02:13:17 Webdesktop kernel: Scanning behind PCI bridge 00:01.0, config 010100, pass 1
Oct 30 02:13:17 Webdesktop kernel: Bus scan for 00 returning with max=01
Oct 30 02:13:17 Webdesktop kernel: PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Oct 30 02:13:17 Webdesktop kernel: PCI->APIC IRQ transform: (B0,I8,P0) -> 16
Oct 30 02:13:17 Webdesktop kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17
Oct 30 02:13:17 Webdesktop kernel: PCI->APIC IRQ transform: (B0,I17,P0) -> 16
Oct 30 02:13:17 Webdesktop kernel: PCI->APIC IRQ transform: (B0,I17,P2) -> 18
Oct 30 02:13:17 Webdesktop kernel: PCI->APIC IRQ transform: (B0,I18,P0) -> 16
Oct 30 02:13:17 Webdesktop kernel: isapnp: Scanning for PnP cards...
Oct 30 02:13:17 Webdesktop kernel: isapnp: No Plug & Play device found
Oct 30 02:13:17 Webdesktop kernel: Linux NET4.0 for Linux 2.4
Oct 30 02:13:17 Webdesktop kernel: Based upon Swansea University Computer Society NET3.039
Oct 30 02:13:17 Webdesktop kernel: Initializing RT netlink socket
Oct 30 02:13:17 Webdesktop kernel: Starting kswapd
Oct 30 02:13:17 Webdesktop kernel: Journalled Block Device driver loaded
Oct 30 02:13:17 Webdesktop kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
*** Oct 30 02:13:17 Webdesktop kernel: ACPI: System description tables not found
*** Oct 30 02:13:17 Webdesktop kernel: ACPI-0068: *** Error: Acpi_load_tables: Could not get RSDP, AE_ERROR
*** Oct 30 02:13:17 Webdesktop kernel: ACPI-0116: *** Error: Acpi_load_tables: Could not load tables: AE_ERROR
*** Oct 30 02:13:17 Webdesktop kernel: ACPI: System description table load failed
Oct 30 02:13:17 Webdesktop kernel: vesafb: framebuffer at 0xe4000000, mapped to 0xd080d000, size 4096k
Oct 30 02:13:17 Webdesktop kernel: vesafb: mode is 640x480x8, linelength=640, pages=11
Oct 30 02:13:17 Webdesktop kernel: vesafb: protected mode interface info at c000:0336
Oct 30 02:13:17 Webdesktop kernel: vesafb: scrolling: redraw
Oct 30 02:13:17 Webdesktop kernel: Console: switching to colour frame buffer device 80x30
-------------------
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2003-01-31 2:40 Steve Ripps
0 siblings, 0 replies; 31+ messages in thread
From: Steve Ripps @ 2003-01-31 2:40 UTC (permalink / raw
To: linux-smp
Gigabyte GA-7VAX Motherboard.
Linux version 2.4.20-ac2 (root@tux) (gcc version 3.2) #1 Thu Jan 30 16:10:49 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
found SMP MP-table at 000f4b50
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: root=/dev/md0
Initializing CPU#0
Detected 1540.538 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3073.63 BogoMIPS
Memory: 254244k/262080k available (1264k kernel code, 5408k reserved, 286k data, 276k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=32036 max_file_pages=0 max_inodes=0 max_dentries=32036
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
..changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-12, 2-17, 2-20, 2-21, 2-22, 2-23 not connected.
.TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
... register #00: 02000000
...... : physical APIC id: 02
... register #01: 00178003
...... : max redirection entries: 0017
...... : PRQ implemented: 1
...... : IO APIC version: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 99
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
.... CPU clock speed is 1540.4669 MHz.
.... host bus clock speed is 267.9072 MHz.
cpu: 0, clocks: 2679072, slice: 1339536
CPU0<T0:2679072,T1:1339536,D:0,S:1339536,C:2679072>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf9cf0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3189] at 00:00.0
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnPBIOS: Found PnP BIOS installation structure at 0xc00fa740
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa770, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1. Probably buggy MP table.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-00DEA0, ATA DISK drive
hda: DMA disabled
blk: queue c02f5d60, I/O limit 4095Mb (mask 0xffffffff)
hdc: WDC WD400BB-00DEA0, ATA DISK drive
hdd: Seagate STT20000A, ATAPI TAPE drive
hdc: DMA disabled
blk: queue c02f61ac, I/O limit 4095Mb (mask 0xffffffff)
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdc: host protected area => 1
hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc:<6> [PTBL] [4865/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 >
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 00000026]
[events: 00000026]
[events: 00000026]
[events: 00000026]
[events: 00000026]
[events: 00000026]
md: autorun ...
md: considering hdc8 ...
md: adding hdc8 ...
md: adding hda8 ...
md: created md2
md: bind<hda8,1>
md: bind<hdc8,2>
md: running: <hdc8><hda8>
md: hdc8's event counter: 00000026
md: hda8's event counter: 00000026
md: md2: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.
md2: max total readahead window set to 124k
md2: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc8 operational as mirror 1
raid1: device hda8 operational as mirror 0
raid1: raid set md2 not clean; reconstructing mirrors
raid1: raid set md2 active with 2 out of 2 mirrors
md: updating md2 RAID superblock on device
md: hdc8 [events: 00000027]<6>(write) hdc8's sb offset: 18579072
md: syncing RAID array md2
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 10000 KB/sec) for reconstruction.
md: using 124k window, over a total of 18579072 blocks.
md: hda8 [events: 00000027]<6>(write) hda8's sb offset: 18579072
md: considering hdc7 ...
md: adding hdc7 ...
md: adding hda7 ...
md: created md1
md: bind<hda7,1>
md: bind<hdc7,2>
md: running: <hdc7><hda7>
md: hdc7's event counter: 00000026
md: hda7's event counter: 00000026
md: md1: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc7 operational as mirror 1
raid1: device hda7 operational as mirror 0
raid1: raid set md1 not clean; reconstructing mirrors
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: hdc7 [events: 00000027]<6>(write) hdc7's sb offset: 16386176
md: delaying resync of md1 until md2 has finished resync (they share one or more physical units)
md: hda7 [events: 00000027]<6>(write) hda7's sb offset: 16386176
md: considering hdc6 ...
md: adding hdc6 ...
md: adding hda6 ...
md: created md0
md: bind<hda6,1>
md: bind<hdc6,2>
md: running: <hdc6><hda6>
md: hdc6's event counter: 00000026
md: hda6's event counter: 00000026
md: RAID level 1 does not need chunksize! Continuing anyway.
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc6 operational as mirror 1
raid1: device hda6 operational as mirror 0
raid1: raid set md0 active with 2 out of 2 mirrors
md: updating md0 RAID superblock on device
md: hdc6 [events: 00000027]<6>(write) hdc6's sb offset: 2048192
md: hda6 [events: 00000027]<6>(write) hda6's sb offset: 2048192
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 09:00) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 276k freed
blk: queue c02f5d60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c02f61ac, I/O limit 4095Mb (mask 0xffffffff)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: Seagate Model: STT20000A Rev: 8A51
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
Adding Swap: 127992k swap-space (priority 1)
reiserfs: checking transaction log (device 09:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Intel(R) PRO/100 Network Driver - version 2.1.24-k1
Copyright (c) 2002 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 S Desktop Adapter
Mem:0xdd020000 IRQ:19 Speed:0 Mbps Dx:N/A
Hardware receive checksums enabled
cpu cycle saver enabled
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 Fast Ethernet at 0xd09c2000, 00:20:ed:5b:56:7e, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139C'
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 292 bytes per conntrack
e100: eth0 NIC Link is Up 100 Mbps Full duplex
--
Steve Ripps
IT tech.
Samson Communications
This email message (and any accompanying file attachments) may contain
confidential or privileged information and is intended for the sole use of
the addressee(s) named above. If you are not the intended recipient, or the
person responsible for delivering this message to the intended recipient,
please notify the sender immediately and destroy all copies of the
original message.
Any unauthorised review, use, alteration, disclosure or distribution of this
email (including any attachments) by an unintended recipient is prohibited.
While all care is taken, the sender cannot guarantee that this email message
and any accompanying file attachments are free of viruses.
No responsibility is accepted for the content of any email which is sent by an
employee which is of a personal nature or which represents the personal
view of the sender.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An Unexpected IO-APIC Was Found
@ 2003-06-29 20:18 Joel Doerr
0 siblings, 0 replies; 31+ messages in thread
From: Joel Doerr @ 2003-06-29 20:18 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 175 bytes --]
Hello,
I just downloaded kernel-2.4.21 and saw this "unexpected IO-APIC" in the
dmesg. Don't know what the heck it is, just taking the time out to send you
the file.
- Joel
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 15360 bytes --]
PTR v0 [ACPIAM]
__va_range(0x3ff30000, 0x68): idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [A M I OEMRSDT 1024.775]
__va_range(0x3ff30200, 0x24): idx=8 mapped at ffff6000
__va_range(0x3ff30200, 0x81): idx=8 mapped at ffff6000
ACPI table found: FACP v2 [A M I OEMFACP 1024.775]
__va_range(0x3ff30390, 0x24): idx=8 mapped at ffff6000
__va_range(0x3ff30390, 0x5c): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [A M I OEMAPIC 1024.775]
__va_range(0x3ff30390, 0x5c): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
LAPIC (acpi_id[0x0002] id[0x1] enabled[1])
CPU 1 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16
IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
2 CPUs total
Local APIC address fee00000
__va_range(0x3ff40040, 0x24): idx=8 mapped at ffff6000
__va_range(0x3ff40040, 0x3f): idx=8 mapped at ffff6000
ACPI table found: OEMB v1 [A M I OEMBIOS 1024.775]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: ASUSTek Product ID: P4C800 APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 3006.861 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6003.09 BogoMIPS
Memory: 1032240k/1047744k available (1348k kernel code, 15116k reserved, 508k data, 128k init, 130240k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
per-CPU timeslice cutoff: 1463.08 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6003.09 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Total of 2 processors activated (12006.19 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-11 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 26.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 003 03 0 0 0 0 0 1 1 69
0a 003 03 0 0 0 0 0 1 1 71
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 79
0d 003 03 0 0 0 0 0 1 1 81
0e 003 03 0 0 0 0 0 1 1 89
0f 003 03 0 0 0 0 0 1 1 91
10 003 03 1 1 0 1 0 1 1 99
11 003 03 1 1 0 1 0 1 1 99
12 003 03 1 1 0 1 0 1 1 99
13 003 03 1 1 0 1 0 1 1 99
14 003 03 1 1 0 1 0 1 1 99
15 003 03 1 1 0 1 0 1 1 99
16 003 03 1 1 0 1 0 1 1 99
17 003 03 1 1 0 1 0 1 1 A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:23
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:16-> 0:17-> 0:18-> 0:19-> 0:20-> 0:21-> 0:22
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3006.9142 MHz.
..... host bus clock speed is 200.4608 MHz.
cpu: 0, clocks: 2004608, slice: 668202
CPU0<T0:2004608,T1:1336400,D:6,S:668202,C:2004608>
cpu: 1, clocks: 2004608, slice: 668202
CPU1<T0:2004608,T1:668192,D:12,S:668202,C:2004608>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
keyboard: Timeout - AT keyboard not present?(ed)
hdc: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
keyboard: Timeout - AT keyboard not present?(f4)
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 274k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 29160N Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue c1cee618, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST336607LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c1cee418, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST336607LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c1cee018, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
sdb: sdb1 sdb2
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 128k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
ehci-hcd 00:1d.7: irq 5, pci mem f8892c00
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 128.
ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 10:58:30 Jun 29 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xef00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xef20, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
Adding Swap: 2104504k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub.c: new USB device 00:1d.0-1, assigned address 2
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: USB device 2 (vend/prod 0x46d/0xc506) is not claimed by any active driver.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub.c: new USB device 00:1d.0-2, assigned address 3
usb.c: USB device 3 (vend/prod 0xc16/0x1) is not claimed by any active driver.
ohci1394: $Rev: 896 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[feaff800-feafffff] Max Packet=[2048]
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[feaff000-feaff7ff] Max Packet=[2048]
ieee1394: Host added: Node[00:1023] GUID[00e01800001cb0bf] [Linux OHCI-1394]
ieee1394: Host added: Node[01:1023] GUID[00023c00c1003afd] [Linux OHCI-1394]
hdc: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: DVD RW DRU-510A Rev: 1.0a
Type: CD-ROM ANSI SCSI revision: 02
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
usb-uhci.c: interrupt, status 2, frame# 703
input1: USB HID v1.00 Keyboard [Gyration GyroPoint RF Technology Receiver] on usb2:3.0
input2,hiddev0: USB HID v1.00 Mouse [Gyration GyroPoint RF Technology Receiver] on usb2:3.1
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb-uhci.c: ENXIO 84000380, flags 0, urb f76aa700, burb f7682780
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 84000380, flags 0, urb f76aa700, burb f7682780
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 84000380, flags 0, urb f76aa700, burb f7682780
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 18 ret -6
ip_tables: (C) 2000-2002 Netfilter core team
divert: allocating divert_blk for eth0
3C2000: 3Com Gigabit NIC Driver Version A10
Copyright (C) 2003 3Com Corporation.
Copyright (C) 2003 Marvell.
eth0: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
scatter-gather: enabled
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
lp0: console ready
1: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Trying generic Intel routines for device id: 2578
agpgart: AGP aperture is 64M @ 0xf4000000
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
[not found] <20030711174300.52EFB40042@papaya>
@ 2003-07-11 16:16 ` Gerbrand Oudenaarden
2003-07-11 20:43 ` Randy.Dunlap
0 siblings, 1 reply; 31+ messages in thread
From: Gerbrand Oudenaarden @ 2003-07-11 16:16 UTC (permalink / raw
To: linux-smp
Hi,
dmesg asked me to send a message to this address.
My configuration:
Supermicro P4SCA Mainboard
Single Pentium 4 2,8 GHz Processor
3 * 512 MB SDRAM DDR 400
4 * 200 GB Maxtor harddisks on Promise TX2000 IDE Raid card
1 * 3 GB Compaq IDE harddisk on mainboard IDE controller
I have the following problem: a few minutes after booting up with this
custom-compiled 2.4.21 kernel, the system freezes.
Oops: unable to handle kernel NULL pointer dereference at virtual address
00000000
[...]
Kernel Panic
I disabled hyperthreading in the BIOS. When I enable hyperthreading, I am
getting the same message.
hope this contributes to something.
Gerbrand
------ Forwarded Message
From: root@papaya.engagetv.com (root)
Date: Fri, 11 Jul 2003 19:43:00 +0200 (CEST)
To: undisclosed-recipients: ;
Linux version 2.4.21 (root@papaya) (gcc version 3.3.1 20030626 (Debian
prerelease)) #5 Fri Jul 11 19:10:24 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000060000000 (usable)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
640MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5480
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 393216
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 163840 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: Searched entire block, no RSDP was found.
ACPI: System description tables not found
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium 4(tm) XEON(tm) APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: auto BOOT_IMAGE=Linux-07-07 ro root=301
Initializing CPU#0
Detected 2795.269 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 5570.56 BogoMIPS
Memory: 1551448k/1572864k available (1543k kernel code, 21020k reserved,
500k data, 124k init, 655360k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-7, 2-9, 2-10, 2-11, 2-12, 2-20, 2-21 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 000 00 1 0 0 0 0 0 0 00
08 001 01 0 0 0 0 0 1 1 59
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 001 01 0 0 0 0 0 1 1 61
0e 001 01 0 0 0 0 0 1 1 69
0f 001 01 0 0 0 0 0 1 1 71
10 001 01 1 1 0 1 0 1 1 79
11 001 01 1 1 0 1 0 1 1 81
12 001 01 1 1 0 1 0 1 1 89
13 001 01 1 1 0 1 0 1 1 91
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 99
17 001 01 1 1 0 1 0 1 1 A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2795.4048 MHz.
..... host bus clock speed is 199.6716 MHz.
cpu: 0, clocks: 1996716, slice: 998358
CPU0<T0:1996704,T1:998336,D:10,S:998358,C:1996716>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I2,P0) -> 18
PCI->APIC IRQ transform: (B2,I3,P0) -> 17
PCI->APIC IRQ transform: (B2,I9,P0) -> 16
PCI->APIC IRQ transform: (B2,I10,P0) -> 22
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
Copyright (c) 1999-2003 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 Fast Ethernet at 0xf882e000, 00:40:f4:6b:e9:a1, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdb: C/H/S=65535/16/255 from BIOS ignored
hda: WDC AC23200L, ATA DISK drive
hdb: Maxtor 6Y200P0, ATA DISK drive
hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: host protected area => 1
hda: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=787/128/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 p6 > p4
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
pktgen.c: v1.2: Packet Generator for packet performance testing.
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
arp_tables: (C) 2002 David S. Miller
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ipv6_frag_init: Could not register protocol
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(recovery.c, 256): journal_recover: JBD: recovery, exit status 0, recovered
transactions 11635 to 11698
(recovery.c, 258): journal_recover: JBD: Replayed 989 and revoked 0/1 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 99251
ext3_orphan_cleanup: deleting unreferenced inode 99250
EXT3-fs: ide0(3,1): 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 124k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 439448k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
eth0: no IPv6 routers present
------ End of Forwarded Message
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: An unexpected IO-APIC was found
2003-07-11 16:16 ` Gerbrand Oudenaarden
@ 2003-07-11 20:43 ` Randy.Dunlap
0 siblings, 0 replies; 31+ messages in thread
From: Randy.Dunlap @ 2003-07-11 20:43 UTC (permalink / raw
To: Gerbrand Oudenaarden; +Cc: linux-smp
On Fri, 11 Jul 2003 18:16:22 +0200 Gerbrand Oudenaarden <gerbrand@oudenaarden.nl> wrote:
| Hi,
|
| dmesg asked me to send a message to this address.
|
| My configuration:
|
| Supermicro P4SCA Mainboard
| Single Pentium 4 2,8 GHz Processor
| 3 * 512 MB SDRAM DDR 400
| 4 * 200 GB Maxtor harddisks on Promise TX2000 IDE Raid card
| 1 * 3 GB Compaq IDE harddisk on mainboard IDE controller
|
|
| I have the following problem: a few minutes after booting up with this
| custom-compiled 2.4.21 kernel, the system freezes.
|
| Oops: unable to handle kernel NULL pointer dereference at virtual address
| 00000000
| [...]
| Kernel Panic
|
| I disabled hyperthreading in the BIOS. When I enable hyperthreading, I am
| getting the same message.
|
| hope this contributes to something.
|
| ------ Forwarded Message
| From: root@papaya.engagetv.com (root)
| Date: Fri, 11 Jul 2003 19:43:00 +0200 (CEST)
| To: undisclosed-recipients: ;
|
| Linux version 2.4.21 (root@papaya) (gcc version 3.3.1 20030626 (Debian
| prerelease)) #5 Fri Jul 11 19:10:24 CEST 2003
...
| testing the IO APIC.......................
|
| IO APIC #2......
| .... register #00: 02000000
| ....... : physical APIC id: 02
| ....... : Delivery Type: 0
| ....... : LTS : 0
| .... register #01: 00178020
| ....... : max redirection entries: 0017
| ....... : PRQ implemented: 1
| ....... : IO APIC version: 0020
| .... register #02: 00178020
| ....... : arbitration: 00
| An unexpected IO-APIC was found. If this kernel release is less than
| three months old please report this to linux-smp@vger.kernel.org
Hi,
This unexpected IO APIC has already been fixed.
If you want someone to address the kernel panic (above),
please send the full Oops/panic message text.
--
~Randy
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2003-07-24 22:03 Klaas de Waal
0 siblings, 0 replies; 31+ messages in thread
From: Klaas de Waal @ 2003-07-24 22:03 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 444 bytes --]
Hi,
Kernel 2.4.21 gives the message:
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
The "dmesg" log is attached.
Also the "dmesg" log of the same system booting RH9 is attached; this
one does not give this message.
For reference:
The system is "Medion", with MSI motherboard and SiS chipset, P4 2.66GHz.
Hope this is useful, regards,
Klaas de Waal
[-- Attachment #2: boot-2.4.21.log --]
[-- Type: text/plain, Size: 15312 bytes --]
ng APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: BOOT_IMAGE=LinuxNew ro root=30b hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Initializing CPU#0
Detected 2672.794 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5334.63 BogoMIPS
Memory: 774252k/786368k available (1977k kernel code, 11728k reserved, 658k data, 140k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
per-CPU timeslice cutoff: 1463.20 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-3, 2-5, 2-9, 2-11, 2-13 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178014
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0014
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 000 00 1 0 0 0 0 0 0 00
04 001 01 0 0 0 0 0 1 1 41
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 49
07 001 01 0 0 0 0 0 1 1 51
08 001 01 0 0 0 0 0 1 1 59
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 61
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 69
0d 000 00 1 0 0 0 0 0 0 00
0e 001 01 0 0 0 0 0 1 1 71
0f 001 01 0 0 0 0 0 1 1 79
10 001 01 1 1 0 1 0 1 1 81
11 001 01 1 1 0 1 0 1 1 89
12 001 01 1 1 0 1 0 1 1 91
13 001 01 1 1 0 1 0 1 1 99
14 001 01 1 1 0 1 0 1 1 A1
15 001 01 1 1 0 1 0 1 1 A9
16 001 01 1 1 0 1 0 1 1 B1
17 001 01 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2672.7920 MHz.
..... host bus clock speed is 133.6395 MHz.
cpu: 0, clocks: 1336395, slice: 668197
CPU0<T0:1336384,T1:668176,D:11,S:668197,C:1336395>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
PCI->APIC IRQ transform: (B0,I2,P1) -> 17
PCI->APIC IRQ transform: (B0,I2,P0) -> 16
PCI->APIC IRQ transform: (B0,I2,P2) -> 18
PCI->APIC IRQ transform: (B0,I3,P0) -> 20
PCI->APIC IRQ transform: (B0,I3,P1) -> 21
PCI->APIC IRQ transform: (B0,I3,P2) -> 22
PCI->APIC IRQ transform: (B0,I3,P3) -> 23
PCI->APIC IRQ transform: (B0,I4,P0) -> 19
PCI->APIC IRQ transform: (B0,I8,P0) -> 19
PCI->APIC IRQ transform: (B0,I10,P0) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vesafb: framebuffer at 0xd8000000, mapped to 0xf0800000, size 12288k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:def0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Unsupported SiS chipset (device id: 0648), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648 ATA 133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST3120023A, ATA DISK drive
blk: queue c04088a0, I/O limit 4095Mb (mask 0xffffffff)
hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
hdd: JLMS DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
ide-cd: passing drive hdc to ide-scsi emulation.
ide-cd: passing drive hdd to ide-scsi emulation.
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS1
Type: CD-ROM ANSI SCSI revision: 02
Vendor: JLMS Model: DVD-ROM LTD-165H Rev: CH0U
Type: CD-ROM ANSI SCSI revision: 02
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
host/usb-ohci.c: USB OHCI at membase 0xf1401000, IRQ 20
host/usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c18e1d00, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: f1401000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: no over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c18e1d00
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
host/usb-ohci.c: USB OHCI at membase 0xf1403000, IRQ 21
host/usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF c18e1ba0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: f1403000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: no over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c18e1ba0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
host/usb-ohci.c: USB OHCI at membase 0xf1405000, IRQ 22
host/usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 3
usb.c: kmalloc IF c18e1a40, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: f1405000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: no over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c18e1a40
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
reiserfs: checking transaction log (device 03:0b) ...
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 140k freed
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: new USB device 00:03.1-1, assigned address 2
Adding Swap: 1020088k swap-space (priority -1)
sis900.c: v1.08.06 9/24/2002
eth0: Unknown PHY transceiver found at address 0.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 31 as default
eth0: SiS 900 PCI Fast Ethernet at 0xec00, IRQ 19, 00:10:dc:8f:70:a7.
Intel 810 + AC97 Audio, version 0.24, 23:36:53 Jul 24 2003
i810: SiS 7012 found at IO 0xe800 and 0xe400, MEM 0x0000 and 0x0000, IRQ 18
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
NTFS driver v1.1.22 [Flags: R/O MODULE]
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: new USB device 00:03.1-1, assigned address 3
ttyS1: LSR safety check engaged!
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 303, change 10, 1.5 Mb/s
hub.c: new USB device 00:03.1-2, assigned address 4
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: port 2, portstatus 303, change 10, 1.5 Mb/s
hub.c: new USB device 00:03.1-2, assigned address 5
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=5 (error=-110)
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
[-- Attachment #3: boot-2.4.20-8.rh9.log --]
[-- Type: text/plain, Size: 10792 bytes --]
Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/1 hdc=ide-scsi vga=791
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2672.771 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5334.63 BogoMIPS
Memory: 769888k/786368k available (1347k kernel code, 13916k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd8000000, mapped to 0xf080d000, size 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:def0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
PCI: Found IRQ 11 for device 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648 ATA 133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST3120023A, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
hdd: JLMS DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf884b000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xf884d000, IRQ 3
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xf884f000, IRQ 5
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
ehci-hcd 00:03.3: PCI device 1039:7002 (Silicon Integrated Systems [SiS])
ehci-hcd 00:03.3: irq 11, pci mem f8857000
usb.c: new USB bus registered, assigned bus number 4
PCI: 00:03.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:03.3 PCI cache line size corrected to 128.
ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal
Adding Swap: 1020088k swap-space (priority -1)
hub.c: new USB device 00:03.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xdb0/0x6982) is not claimed by any active driver.
hub.c: new USB device 00:03.1-2, assigned address 3
input0: USB HID v1.00 Gamepad [Microsoft��� Microsoft��� SideWinder��� Game Pad USB] on usb2:3.0
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Medion Model: Flash XL CF Rev: 2.6D
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 9 for device 00:02.3
PCI: Sharing IRQ 9 with 00:0a.0
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e2426000-e24267ff] Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023] GUID[0000000000000000] [Linux OHCI-1394]
ieee1394: Host removed: Node[00:1023] GUID[0000000000000000] [Linux OHCI-1394]
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 9 for device 00:02.3
PCI: Sharing IRQ 9 with 00:0a.0
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e2426000-e24267ff] Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023] GUID[0000000000000000] [Linux OHCI-1394]
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS1
Type: CD-ROM ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU0 no microcode found! (sig=f27, pflags=4)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, HEWLETT-PACKARD DESKJET 940C
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 173x/40x writer cd/rw xa/form2 cdda tray
ip_tables: (C) 2000-2002 Netfilter core team
sis900.c: v1.08.06 9/24/2002
divert: allocating divert_blk for eth0
eth0: Unknown PHY transceiver found at address 0.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 31 as default
eth0: SiS 900 PCI Fast Ethernet at 0xec00, IRQ 5, 00:10:dc:8f:70:a7.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, HEWLETT-PACKARD DESKJET 940C
lp0: using parport0 (polling).
lp0: console ready
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2003-08-23 11:45 Renzo Toma
0 siblings, 0 replies; 31+ messages in thread
From: Renzo Toma @ 2003-08-23 11:45 UTC (permalink / raw
To: linux-smp
Hi there, while booting 2.4.21 on a P4 2.8Ghz /w hyperthreading I get
this:
---
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-12, 2-21, 2-22 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
---
I am sure you need more info, so please ask and I'll gather all your need.
Cheers,
Renzo
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2003-08-26 0:20 Eric C. Cooper
0 siblings, 0 replies; 31+ messages in thread
From: Eric C. Cooper @ 2003-08-26 0:20 UTC (permalink / raw
To: linux-smp
I got this warning message when I booted 2.4.22.
This machine has an ASUS P4S8X motherboard.
----
Linux version 2.4.22 (root@jaguar.home) (gcc version 3.3.1 20030626 (Debian prerelease)) #1 Mon Aug 25 18:12:50 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fffc000 (usable)
BIOS-e820: 000000005fffc000 - 000000005ffff000 (ACPI data)
BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 393212
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 163836 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5810
ACPI: RSDT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x5fffc000
ACPI: FADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x5fffc0c0
ACPI: BOOT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x5fffc030
ACPI: MADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x5fffc058
ACPI: DSDT (v001 ASUS P4S8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: auto BOOT_IMAGE=linux ro root=301 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2400.104 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 1551952k/1572848k available (1175k kernel code, 20508k reserved, 453k data, 108k init, 655344k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 001 01 1 1 0 1 0 1 1 71
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:20
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2400.2145 MHz.
..... host bus clock speed is 133.3451 MHz.
cpu: 0, clocks: 1333451, slice: 666725
CPU0<T0:1333440,T1:666704,D:11,S:666725,C:1333451>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
00:00:02[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
PCI: No IRQ known for interrupt pin A of device 00:03.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
--
Eric C. Cooper e c c @ c m u . e d u
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2003-08-28 20:57 Kelvin Wilcox
0 siblings, 0 replies; 31+ messages in thread
From: Kelvin Wilcox @ 2003-08-28 20:57 UTC (permalink / raw
To: 'linux-smp@vger.kernel.org'
Hi.
I've just installed Redhat 9 on a New PC Server I have.
P4 3Ghz 800fsb Hyperthreading Cpu
1GB PC400 RAM
ASUS P4P800-VM Motherboard.
Ive done a up2date and am now fully upto date.
in dmesg I have this error. Is it anything tobe concerned about,
or a way around it is known ? It says to mail you so thought
would give it a shot.
Regards, Kelvin Wilcox.
uname -a
Linux Shonky 2.4.20-20.9smp #1 SMP Mon Aug 18 11:32:15 EDT 2003 i686 i686
i386 GNU/Linux
Cut---- of dmesg --------
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
per-CPU timeslice cutoff: 1462.91 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
WARNING: No sibling found for CPU 0.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-21 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 22.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 51
07 0FF 0F 0 0 0 0 0 1 1 59
08 0FF 0F 0 0 0 0 0 1 1 61
09 0FF 0F 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 0FF 0F 0 0 0 0 0 1 1 71
0d 0FF 0F 0 0 0 0 0 1 1 79
0e 0FF 0F 0 0 0 0 0 1 1 81
0f 0FF 0F 0 0 0 0 0 1 1 89
10 0FF 0F 1 1 0 1 0 1 1 91
11 0FF 0F 1 1 0 1 0 1 1 99
12 0FF 0F 1 1 0 1 0 1 1 A1
13 0FF 0F 1 1 0 1 0 1 1 A9
14 0FF 0F 1 1 0 1 0 1 1 B1
15 000 00 1 0 0 0 0 0 0 00
16 0FF 0F 1 1 0 1 0 1 1 B9
17 0FF 0F 1 1 0 1 0 1 1 C1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2003-09-02 3:48 ratan
0 siblings, 0 replies; 31+ messages in thread
From: ratan @ 2003-09-02 3:48 UTC (permalink / raw
To: linux-smp
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 000 00 1 0 0 0 0 0 0 00
04 0FF 0F 0 0 0 0 0 1 1 41
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 49
07 0FF 0F 0 0 0 0 0 1 1 51
08 0FF 0F 0 0 0 0 0 1 1 59
09 0FF 0F 0 0 0 0 0 1 1 61
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 0FF 0F 0 0 0 0 0 1 1 69
0d 0FF 0F 0 0 0 0 0 1 1 71
0e 0FF 0F 0 0 0 0 0 1 1 79
0f 0FF 0F 0 0 0 0 0 1 1 81
10 0FF 0F 1 1 0 1 0 1 1 89
11 0FF 0F 1 1 0 1 0 1 1 91
12 0FF 0F 1 1 0 1 0 1 1 99
13 0FF 0F 1 1 0 1 0 1 1 A1
14 0FF 0F 1 1 0 1 0 1 1 A9
15 000 00 1 0 0 0 0 0 0 00
16 0FF 0F 1 1 0 1 0 1 1 B1
17 0FF 0F 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2003-09-11 0:29 Andriy Rysin
0 siblings, 0 replies; 31+ messages in thread
From: Andriy Rysin @ 2003-09-11 0:29 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 51 bytes --]
if you need more info, please let me know.
Andriy
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 14930 bytes --]
Linux version 2.4.22-20.1.2024.2.36.nptlsmp (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 SMP Wed Sep 3 10:36:05 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5690
ACPI: RSDT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0c0
ACPI: BOOT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS P4S533-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=2.4.22 ro BOOT_FILE=/boot/vmlinuz-2.4.22-20.1.2024.2.36.nptlsmp hdc=ide-scsi root=LABEL=/ panic=60
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 3059.080 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6107.95 BogoMIPS
Memory: 513568k/524272k available (1638k kernel code, 10316k reserved, 1190k data, 164k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
per-CPU timeslice cutoff: 1462.70 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6107.95 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
Total of 2 processors activated (12215.91 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 003 03 1 1 0 1 0 1 1 71
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:20
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3058.8786 MHz.
..... host bus clock speed is 132.9945 MHz.
cpu: 0, clocks: 1329945, slice: 443315
CPU0<T0:1329936,T1:886608,D:13,S:443315,C:1329945>
cpu: 1, clocks: 1329945, slice: 443315
CPU1<T0:1329936,T1:443296,D:10,S:443315,C:1329945>
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
mapping CPU#0's runqueue to CPU#1's runqueue.
Starting migration thread for cpu 0
smp_num_cpus: 2.
Starting migration thread for cpu 1
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
00:00:02[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
PCI: No IRQ known for interrupt pin A of device 00:03.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Asus Laptop ACPI Extras version 0.24a
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD1200JB-00CRA1, ATA DISK drive
blk: queue c049bd60, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-48125W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 228k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
3ware Storage Controller device driver for Linux v1.02.00.036.
scsi0 : Found a 3ware Storage Controller at 0x9400, IRQ: 17, P-chip: 1.3
scsi0 : 3ware Storage Controller
blk: queue c1673618, I/O limit 4095Mb (mask 0xffffffff)
Vendor: 3ware Model: Logical Disk 0 Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 00
blk: queue c1673418, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 960478720 512-byte hdwr sectors (491765 MB)
sda: sda1
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 164k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: No IRQ known for interrupt pin A of device 00:03.0
usb-ohci.c: USB OHCI at membase 0xe0887000, IRQ 9
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xe0889000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem e0892000
usb.c: new USB bus registered, assigned bus number 3
PCI: 00:03.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:03.3 PCI cache line size corrected to 128.
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
Adding Swap: 891568k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdc: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-48125W Rev: VS04
Type: CD-ROM ANSI SCSI revision: 02
blk: queue c049bd60, I/O limit 4095Mb (mask 0xffffffff)
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2003-11-06 7:25 Ole Lindbjerg
0 siblings, 0 replies; 31+ messages in thread
From: Ole Lindbjerg @ 2003-11-06 7:25 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 477 bytes --]
Hi
I just enabled HyperThreading on my DELL pc.
XP found the drivers, but Mandrake found an error. Se attached log.
Please reply how to solve.
<<systemlog.log>>
Venlig hilsen/best regards
Ole Lindbjerg
Software Engineer, CCNA
Elsam Engineering A/S
Kraftværksvej 53
DK-7000 Fredericia
Tel.: +45 79233333
Fax: +45 75564477
Web: www.elsam-eng.com
Mail: oli@elsam-eng.com
He who sees his own mistakes, has no time to consider those of others...
[-- Attachment #2: systemlog.log --]
[-- Type: application/octet-stream, Size: 34373 bytes --]
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-provided physical RAM map:
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 000000003ff70000 - 000000003ff72000 (ACPI NVS)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 000000003ff72000 - 000000003ff93000 (ACPI data)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 000000003ff93000 - 0000000040000000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 5 21:38:52 Mandrake-Freja partmon: ^[[65G[^[[1;32m
Nov 5 21:38:52 Mandrake-Freja kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 5 21:38:52 Mandrake-Freja kernel: 127MB HIGHMEM available.
Nov 5 21:38:52 Mandrake-Freja kernel: 896MB LOWMEM available.
Nov 5 21:38:52 Mandrake-Freja kernel: found SMP MP-table at 000fe710
Nov 5 21:38:52 Mandrake-Freja kernel: hm, page 000fe000 reserved twice.
Nov 5 21:38:52 Mandrake-Freja kernel: hm, page 000ff000 reserved twice.
Nov 5 21:38:52 Mandrake-Freja kernel: hm, page 000f0000 reserved twice.
Nov 5 21:38:52 Mandrake-Freja kernel: On node 0 totalpages: 262000
Nov 5 21:38:52 Mandrake-Freja kernel: zone(0): 4096 pages.
Nov 5 21:38:52 Mandrake-Freja kernel: zone(1): 225280 pages.
Nov 5 21:38:52 Mandrake-Freja kernel: zone(2): 32624 pages.
Nov 5 21:38:52 Mandrake-Freja kernel: Intel MultiProcessor Specification v1.4
Nov 5 21:38:52 Mandrake-Freja kernel: Virtual Wire compatibility mode.
Nov 5 21:38:52 Mandrake-Freja kernel: OEM ID: DELL Product ID: Opti GX270 APIC at: 0xFEE00000
Nov 5 21:38:52 Mandrake-Freja kernel: Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
Nov 5 21:38:52 Mandrake-Freja kernel: I/O APIC #2 Version 32 at 0xFEC00000.
Nov 5 21:38:52 Mandrake-Freja kernel: Enabling APIC mode: Flat.^IUsing 1 I/O APICs
Nov 5 21:38:52 Mandrake-Freja kernel: Processors: 1
Nov 5 21:38:52 Mandrake-Freja kernel: Kernel command line: BOOT_IMAGE=linux-enterpris ro root=305 devfs=mount hdd=ide-scsi acpi=off
Nov 5 21:38:52 Mandrake-Freja kernel: ide_setup: hdd=ide-scsi
Nov 5 21:38:52 Mandrake-Freja kernel: Initializing CPU#0
Nov 5 21:38:52 Mandrake-Freja kernel: Detected 2593.573 MHz processor.
Nov 5 21:38:52 Mandrake-Freja kernel: Console: colour VGA+ 80x25
Nov 5 21:38:52 Mandrake-Freja kernel: Calibrating delay loop... 5177.34 BogoMIPS
Nov 5 21:38:52 Mandrake-Freja kernel: Memory: 1031772k/1048000k available (1584k kernel code, 15844k reserved, 1135k data, 156k init, 130496k highmem)
Nov 5 21:38:52 Mandrake-Freja kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 5 21:38:52 Mandrake-Freja kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 5 21:38:52 Mandrake-Freja kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 5 21:38:52 Mandrake-Freja kernel: Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 5 21:38:52 Mandrake-Freja kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: L2 cache: 512K
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: Physical Processor ID: 0
Nov 5 21:38:52 Mandrake-Freja kernel: Intel machine check architecture supported.
Nov 5 21:38:52 Mandrake-Freja kernel: Intel machine check reporting enabled on CPU#0.
Nov 5 21:38:52 Mandrake-Freja kernel: Enabling fast FPU save and restore... done.
Nov 5 21:38:52 Mandrake-Freja kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 5 21:38:52 Mandrake-Freja kernel: Checking 'hlt' instruction... OK.
Nov 5 21:38:52 Mandrake-Freja kernel: POSIX conformance testing by UNIFIX
Nov 5 21:38:52 Mandrake-Freja kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 5 21:38:52 Mandrake-Freja kernel: mtrr: detected mtrr type: Intel
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: L2 cache: 512K
Nov 5 21:38:52 Mandrake-Freja kernel: CPU: Physical Processor ID: 0
Nov 5 21:38:52 Mandrake-Freja kernel: Intel machine check reporting enabled on CPU#0.
Nov 5 21:38:52 Mandrake-Freja kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Nov 5 21:38:52 Mandrake-Freja kernel: per-CPU timeslice cutoff: 1462.72 usecs.
Nov 5 21:38:52 Mandrake-Freja kernel: enabled ExtINT on CPU#0
Nov 5 21:38:52 Mandrake-Freja kernel: ESR value before enabling vector: 00000040
Nov 5 21:38:52 Mandrake-Freja kernel: ESR value after enabling vector: 00000000
Nov 5 21:38:52 Mandrake-Freja kernel: Error: only one processor found.
Nov 5 21:38:52 Mandrake-Freja kernel: WARNING: No sibling found for CPU 0.
Nov 5 21:38:52 Mandrake-Freja kernel: ENABLING IO-APIC IRQs
Nov 5 21:38:52 Mandrake-Freja kernel: Setting 2 in the phys_id_present_map
Nov 5 21:38:52 Mandrake-Freja kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Nov 5 21:38:52 Mandrake-Freja kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 5 21:38:52 Mandrake-Freja kernel: testing the IO APIC.......................
Nov 5 21:38:52 Mandrake-Freja kernel:
Nov 5 21:38:52 Mandrake-Freja kernel: An unexpected IO-APIC was found. If this kernel release is less than
Nov 5 21:38:52 Mandrake-Freja kernel: three months old please report this to linux-smp@vger.kernel.org
Nov 5 21:38:52 Mandrake-Freja partmon:
Nov 5 21:38:52 Mandrake-Freja kernel: .................................... done.
Nov 5 21:38:52 Mandrake-Freja kernel: Using local APIC timer interrupts.
Nov 5 21:38:52 Mandrake-Freja kernel: calibrating APIC timer ...
Nov 5 21:38:52 Mandrake-Freja kernel: ..... CPU clock speed is 2593.5429 MHz.
Nov 5 21:38:52 Mandrake-Freja kernel: ..... host bus clock speed is 199.5030 MHz.
Nov 5 21:38:52 Mandrake-Freja kernel: cpu: 0, clocks: 1995030, slice: 997515
Nov 5 21:38:52 Mandrake-Freja kernel: CPU0<T0:1995024,T1:997504,D:5,S:997515,C:1995030>
Nov 5 21:38:52 Mandrake-Freja kernel: Waiting on wait_init_idle (map = 0x0)
Nov 5 21:38:52 Mandrake-Freja kernel: All processors have done init_idle
Nov 5 21:38:52 Mandrake-Freja kernel: ACPI: Subsystem revision 20030122
Nov 5 21:38:52 Mandrake-Freja kernel: ACPI: Disabled via command line (acpi=off)
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbabb, last bus=2
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: Using configuration type 1
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: Probing PCI hardware
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: ACPI tables contain no PCI IRQ routing entries
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: Probing PCI hardware (bus 00)
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Nov 5 21:38:52 Mandrake-Freja kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
Nov 5 21:38:52 Mandrake-Freja kernel: PCI: Using IRQ router default [8086/24d0] at 00:1f.0
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I29,P3) -> 23
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I31,P0) -> 18
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I31,P0) -> 18
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B2,I9,P0) -> 18
Nov 5 21:38:52 Mandrake-Freja kernel: PCI->APIC IRQ transform: (B2,I12,P0) -> 18
Nov 5 21:38:52 Mandrake-Freja kernel: isapnp: Scanning for PnP cards...
Nov 5 21:38:52 Mandrake-Freja kernel: isapnp: No Plug & Play device found
Nov 5 21:38:52 Mandrake-Freja kernel: Linux NET4.0 for Linux 2.4
Nov 5 21:38:52 Mandrake-Freja kernel: Based upon Swansea University Computer Society NET3.039
Nov 5 21:38:52 Mandrake-Freja kernel: Initializing RT netlink socket
Nov 5 21:38:52 Mandrake-Freja kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Nov 5 21:38:52 Mandrake-Freja kernel: Starting kswapd
Nov 5 21:38:52 Mandrake-Freja kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Nov 5 21:38:52 Mandrake-Freja kernel: VFS: Disk quotas vdquot_6.5.1
Nov 5 21:38:52 Mandrake-Freja kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Nov 5 21:38:52 Mandrake-Freja kernel: devfs: boot_options: 0x1
Nov 5 21:38:52 Mandrake-Freja kernel: pty: 1024 Unix98 ptys configured
Nov 5 21:38:52 Mandrake-Freja kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 5 21:38:52 Mandrake-Freja kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 5 21:38:52 Mandrake-Freja kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Nov 5 21:38:52 Mandrake-Freja kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
Nov 5 21:38:52 Mandrake-Freja kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 5 21:38:52 Mandrake-Freja kernel: ICH5: IDE controller at PCI slot 00:1f.1
Nov 5 21:38:52 Mandrake-Freja kernel: ICH5: chipset revision 2
Nov 5 21:38:52 Mandrake-Freja kernel: ICH5: not 100%% native mode: will probe irqs later
Nov 5 21:38:52 Mandrake-Freja kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Nov 5 21:38:52 Mandrake-Freja kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Nov 5 21:38:52 Mandrake-Freja kernel: hda: WDC WD800BB-75CAA0, ATA DISK drive
Nov 5 21:38:52 Mandrake-Freja kernel: blk: queue c042d000, I/O limit 4095Mb (mask 0xffffffff)
Nov 5 21:38:52 Mandrake-Freja kernel: hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
Nov 5 21:38:52 Mandrake-Freja kernel: hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
Nov 5 21:38:52 Mandrake-Freja kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 5 21:38:52 Mandrake-Freja kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 5 21:38:52 Mandrake-Freja kernel: hda: host protected area => 1
Nov 5 21:38:52 Mandrake-Freja kernel: hda: setmax LBA 156301488, native 156250000
Nov 5 21:38:52 Mandrake-Freja kernel: hda: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=9726/255/63, UDMA(100)
Nov 5 21:38:52 Mandrake-Freja kernel: Partition check:
Nov 5 21:38:52 Mandrake-Freja kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
Nov 5 21:38:52 Mandrake-Freja kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 5 21:38:52 Mandrake-Freja kernel: md: Autodetecting RAID arrays.
Nov 5 21:38:52 Mandrake-Freja kernel: md: autorun ...
Nov 5 21:38:52 Mandrake-Freja kernel: md: ... autorun DONE.
Nov 5 21:38:52 Mandrake-Freja kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 5 21:38:52 Mandrake-Freja kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 5 21:38:52 Mandrake-Freja kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Nov 5 21:38:52 Mandrake-Freja kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov 5 21:38:52 Mandrake-Freja kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 5 21:38:52 Mandrake-Freja kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 5 21:38:52 Mandrake-Freja kernel: RAMDISK: Compressed image found at block 0
Nov 5 21:38:52 Mandrake-Freja kernel: Freeing initrd memory: 86k freed
Nov 5 21:38:52 Mandrake-Freja kernel: VFS: Mounted root (ext2 filesystem).
Nov 5 21:38:52 Mandrake-Freja kernel: Mounted devfs on /dev
Nov 5 21:38:52 Mandrake-Freja kernel: Journalled Block Device driver loaded
Nov 5 21:38:52 Mandrake-Freja kernel: kjournald starting. Commit interval 5 seconds
Nov 5 21:38:52 Mandrake-Freja kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 5 21:38:52 Mandrake-Freja kernel: Mounted devfs on /dev
Nov 5 21:38:52 Mandrake-Freja kernel: Freeing unused kernel memory: 156k freed
Nov 5 21:38:52 Mandrake-Freja kernel: Real Time Clock Driver v1.10e
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: registered new driver usbdevfs
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: registered new driver hub
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: $Revision: 1.275 $ time 15:05:31 Mar 14 2003
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: High bandwidth mode enabled
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 16
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: Detected 2 ports
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: USB hub found
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: 2 ports detected
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 19
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: Detected 2 ports
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: USB hub found
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: 2 ports detected
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: USB UHCI at I/O 0xff40, IRQ 18
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: Detected 2 ports
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: USB hub found
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: 2 ports detected
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: USB UHCI at I/O 0xff20, IRQ 16
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: Detected 2 ports
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: USB hub found
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: 2 ports detected
Nov 5 21:38:52 Mandrake-Freja kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Nov 5 21:38:52 Mandrake-Freja kernel: ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
Nov 5 21:38:52 Mandrake-Freja kernel: ehci-hcd 00:1d.7: irq 23, pci mem f888c800
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: new USB bus registered, assigned bus number 5
Nov 5 21:38:52 Mandrake-Freja kernel: ehci-hcd 00:1d.7: enabled 64bit PCI DMA
Nov 5 21:38:52 Mandrake-Freja kernel: ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec-20
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: USB hub found
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: 8 ports detected
Nov 5 21:38:52 Mandrake-Freja kernel: usbdevfs: remount parameter error
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: registered new driver usblp
Nov 5 21:38:52 Mandrake-Freja kernel: printer.c: v0.11: USB Printer Device Class driver
Nov 5 21:38:52 Mandrake-Freja kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Nov 5 21:38:52 Mandrake-Freja kernel: Adding Swap: 506008k swap-space (priority -1)
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: connect-debounce failed, port 1 disabled
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: new USB device 00:1d.0-1, assigned address 2
Nov 5 21:38:52 Mandrake-Freja kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2811
Nov 5 21:38:52 Mandrake-Freja kernel: hub.c: new USB device 00:1d.3-1, assigned address 2
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: USB device 2 (vend/prod 0x471/0x311) is not claimed by any active driver.
Nov 5 21:38:52 Mandrake-Freja kernel: Linux video capture interface: v1.00
Nov 5 21:38:52 Mandrake-Freja kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.10 loaded.
Nov 5 21:38:52 Mandrake-Freja kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Nov 5 21:38:52 Mandrake-Freja kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Nov 5 21:38:52 Mandrake-Freja kernel: usb.c: registered new driver Philips webcam
Nov 5 21:38:52 Mandrake-Freja kernel: pwc Philips PCVC740K (ToUCam Pro) USB webcam detected.
Nov 5 21:38:52 Mandrake-Freja kernel: pwc Registered as /dev/video0.
Nov 5 21:38:52 Mandrake-Freja kernel: SCSI subsystem driver Revision: 1.00
Nov 5 21:38:52 Mandrake-Freja rc: Starting partmon: succeeded
Nov 5 21:38:52 Mandrake-Freja kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Nov 5 21:38:52 Mandrake-Freja kernel: Vendor: _NEC Model: DVD+RW ND-1100A Rev: 10FD
Nov 5 21:38:52 Mandrake-Freja kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 5 21:38:52 Mandrake-Freja kernel: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Nov 5 21:38:52 Mandrake-Freja kernel: Uniform CD-ROM driver Revision: 3.12
Nov 5 21:38:52 Mandrake-Freja kernel: kjournald starting. Commit interval 5 seconds
Nov 5 21:38:52 Mandrake-Freja kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Nov 5 21:38:52 Mandrake-Freja kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 5 21:38:52 Mandrake-Freja kernel: NTFS driver 2.1.1a [Flags: R/O MODULE].
Nov 5 21:38:52 Mandrake-Freja kernel: NTFS volume version 3.1.
Nov 5 21:38:52 Mandrake-Freja kernel: NTFS volume version 3.1.
Nov 5 21:38:52 Mandrake-Freja kernel: Intel(R) PRO/1000 Network Driver - version 4.4.19-k2
Nov 5 21:38:52 Mandrake-Freja kernel: Copyright (c) 1999-2002 Intel Corporation.
Nov 5 21:38:52 Mandrake-Freja kernel: eth0: Intel(R) PRO/1000 Network Connection
Nov 5 21:38:52 Mandrake-Freja kernel: inserting floppy driver for 2.4.21-0.13mdkenterprise
Nov 5 21:38:52 Mandrake-Freja kernel: Floppy drive(s): fd0 is 1.44M
Nov 5 21:38:52 Mandrake-Freja kernel: FDC 0 is a post-1991 82077
Nov 5 21:38:52 Mandrake-Freja kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Nov 5 21:38:52 Mandrake-Freja kernel: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Nov 5 21:38:52 Mandrake-Freja kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
Nov 5 21:38:52 Mandrake-Freja kernel: CSLIP: code copyright 1989 Regents of the University of California
Nov 5 21:38:52 Mandrake-Freja kernel: PPP generic driver version 2.4.2
Nov 5 21:38:52 Mandrake-Freja kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 5 21:38:52 Mandrake-Freja nfslock: rpc.lockd startup succeeded
Nov 5 21:38:52 Mandrake-Freja rpc.statd[1064]: Version 1.0.1 Starting
Nov 5 21:38:52 Mandrake-Freja nfslock: rpc.statd startup succeeded
Nov 5 21:38:52 Mandrake-Freja radvd[1078]: version 0.7.1 started
Nov 5 21:38:52 Mandrake-Freja radvd[1078]: can't create socket(AF_INET6): Address family not supported by protocol
Nov 5 21:38:52 Mandrake-Freja radvd: radvd startup failed
Nov 5 21:38:52 Mandrake-Freja kernel: Intel 810 + AC97 Audio, version 0.24, 15:02:43 Mar 14 2003
Nov 5 21:38:52 Mandrake-Freja kernel: i810: Intel ICH5 found at IO 0xedc0 and 0xee00, MEM 0xfebffa00 and 0xfebff900, IRQ 17
Nov 5 21:38:52 Mandrake-Freja kernel: i810: Intel ICH5 mmio at 0xf889da00 and 0xf89b8900
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: Primary codec has ID 0
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: Audio Controller supports 6 channels.
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: Defaulting to base 2 channel mode.
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: Resetting connection 0
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: Connection 0 with codec id 0
Nov 5 21:38:52 Mandrake-Freja kernel: ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
Nov 5 21:38:52 Mandrake-Freja kernel: i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Nov 5 21:38:52 Mandrake-Freja ifplugd[954]: Link beat detected.
Nov 5 21:38:52 Mandrake-Freja ifplugd[954]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Nov 5 21:38:52 Mandrake-Freja sound: Loading sound module (i810_audio) succeeded
Nov 5 21:38:53 Mandrake-Freja aumix: vol set to 80, 80
Nov 5 21:38:53 Mandrake-Freja aumix: pcm set to 80, 80
Nov 5 21:38:53 Mandrake-Freja aumix: speaker set to 67, 67
Nov 5 21:38:53 Mandrake-Freja aumix: line set to 67, 67, P
Nov 5 21:38:53 Mandrake-Freja aumix: mic set to 0, 0, R
Nov 5 21:38:53 Mandrake-Freja aumix: cd set to 80, 80, P
Nov 5 21:38:53 Mandrake-Freja aumix: pcm2 set to 67, 67
Nov 5 21:38:53 Mandrake-Freja aumix: igain set to 67, 67, P
Nov 5 21:38:53 Mandrake-Freja aumix: line1 set to 67, 67, P
Nov 5 21:38:53 Mandrake-Freja aumix: phin set to 67, 67, P
Nov 5 21:38:53 Mandrake-Freja aumix: phout set to 67, 67
Nov 5 21:38:53 Mandrake-Freja aumix: video set to 67, 67, P
Nov 5 21:38:53 Mandrake-Freja sound: Loading mixer settings succeeded
Nov 5 21:38:53 Mandrake-Freja random: Initializing random number generator: succeeded
Nov 5 21:38:53 Mandrake-Freja xfs: xfs startup succeeded
Nov 5 21:38:53 Mandrake-Freja xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont (unreadable)
Nov 5 21:38:53 Mandrake-Freja xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
Nov 5 21:38:53 Mandrake-Freja xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
Nov 5 21:38:53 Mandrake-Freja netfs: Mounting other filesystems: succeeded
Nov 5 21:38:53 Mandrake-Freja apmd[1222]: Version: apmd 3.1.0, apm driver 1.16, APM BIOS 1.2
Nov 5 21:38:53 Mandrake-Freja apmd: apmd startup succeeded
Nov 5 21:38:53 Mandrake-Freja dm: Starting display manager:
Nov 5 21:38:53 Mandrake-Freja dm: Display manager startup succeeded
Nov 5 21:38:53 Mandrake-Freja dm:
Nov 5 21:38:53 Mandrake-Freja rc: Starting dm: succeeded
Nov 5 21:38:53 Mandrake-Freja atd: atd startup succeeded
Nov 5 21:38:54 Mandrake-Freja xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/pcf_drakfont:unscaled (unreadable)
Nov 5 21:38:51 Mandrake-Freja harddrake: succeeded
Nov 5 21:38:51 Mandrake-Freja network: Setting network parameters: succeeded
Nov 5 21:38:51 Mandrake-Freja network: Bringing up loopback interface: succeeded
Nov 5 21:38:51 Mandrake-Freja ifplugd[954]: Warning: Could not get interface address.
Nov 5 21:38:51 Mandrake-Freja ifplugd[954]: Using interface eth0/00:0B:DB:72:BE:D5 with driver e1000 4.4.19-k2
Nov 5 21:38:51 Mandrake-Freja ifplugd[954]: ifplugd 0.13 successfully initialized, link beat not detected.
Nov 5 21:38:51 Mandrake-Freja network: Bringing up interface eth0: failed
Nov 5 21:38:51 Mandrake-Freja internet: Checking internet connections to start at boot succeeded
Nov 5 21:38:51 Mandrake-Freja portmap: portmap startup succeeded
Nov 5 21:38:54 Mandrake-Freja saslauthd[1284]: START: saslauthd 2.1.12
Nov 5 21:38:54 Mandrake-Freja saslauthd[1294]: master PID is: 1294
Nov 5 21:38:54 Mandrake-Freja saslauthd: saslauthd startup succeeded
Nov 5 21:38:55 Mandrake-Freja saslauthd[1294]: daemon started, listening on /var/lib/sasl2/mux
Nov 5 21:38:55 Mandrake-Freja acpid: acpid: can't open /proc/acpi/event: No such file or directory
Nov 5 21:38:55 Mandrake-Freja acpid: acpid startup failed
Nov 5 21:38:55 Mandrake-Freja ifplugd[954]: Program executed successfully.
Nov 5 21:38:55 Mandrake-Freja sshd: Starting sshd:
Nov 5 21:38:55 Mandrake-Freja sshd: succeeded
Nov 5 21:38:55 Mandrake-Freja sshd: ^[[65G[^[[1;32m
Nov 5 21:38:55 Mandrake-Freja sshd:
Nov 5 21:38:55 Mandrake-Freja sshd[1363]: Server listening on 0.0.0.0 port 22.
Nov 5 21:38:55 Mandrake-Freja rc: Starting sshd: succeeded
Nov 5 21:38:55 Mandrake-Freja tmdns[1382]: enter main loop
Nov 5 21:38:55 Mandrake-Freja tmdns: tmdns startup succeeded
Nov 5 21:38:55 Mandrake-Freja apmd[1222]: Using AC power
Nov 5 21:38:55 Mandrake-Freja apmd[1222]: Battery: absent
Nov 5 21:38:56 Mandrake-Freja tmdns[1382]: claim name "Mandrake-Freja.local", type 1
Nov 5 21:38:57 Mandrake-Freja xinetd[1410]: Service ftp: attribute already set: disable [line=16]
Nov 5 21:38:58 Mandrake-Freja xinetd[1410]: xinetd Version 2.3.10 started with libwrap options compiled in.
Nov 5 21:38:58 Mandrake-Freja xinetd[1410]: Started working: 2 available services
Nov 5 21:39:00 Mandrake-Freja xinetd: xinetd-opstart succeeded
Nov 5 21:39:00 Mandrake-Freja devfsd[106]: error calling: "unlink" in "GLOBAL"
Nov 5 21:39:00 Mandrake-Freja devfsd[106]: error calling: "unlink" in "GLOBAL"
Nov 5 21:39:00 Mandrake-Freja devfsd[106]: error copying: "/dev/ptal-printd" to "/lib/dev-state/ptal-printd"
Nov 5 21:39:00 Mandrake-Freja ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:PSC_2100_Series>, pid=1432, e=2 ptal-mlcd successfully initialized.
Nov 5 21:39:00 Mandrake-Freja ptal-printd: ptal-printd(mlc:usb:PSC_2100_Series) successfully initialized using /var/run/ptal-printd/mlc_usb_PSC_2100_Series*.
Nov 5 21:39:03 Mandrake-Freja kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Nov 5 21:39:03 Mandrake-Freja kernel: parport0: irq 7 detected
Nov 5 21:39:03 Mandrake-Freja kernel: lp0: using parport0 (polling).
Nov 5 21:39:05 Mandrake-Freja ptal-mlcd: SYSLOG at /export/home/gb.local/rpm/BUILD/hpoj-0.90/mlcd/bp/ex/ExMgr.h:564, dev=<mlc:usb:PSC_2100_Series@/dev/usb/lp0>, pid=1432, e=11 ptal-mlcd successfully activated, mode=1284.4.
Nov 5 21:39:05 Mandrake-Freja cups: cupsd startup succeeded
Nov 5 21:39:06 Mandrake-Freja nfs: Starting NFS services: succeeded
Nov 5 21:39:06 Mandrake-Freja nfs: rpc.nfsd startup succeeded
Nov 5 21:39:06 Mandrake-Freja nfs: rpc.mountd startup succeeded
Nov 5 21:39:06 Mandrake-Freja rwhod: rwhod startup succeeded
Nov 5 21:39:07 Mandrake-Freja loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/dk-latin1.kmap.gz
Nov 5 21:39:07 Mandrake-Freja keytable: Loading keymap: dk-latin1 succeeded
Nov 5 21:39:07 Mandrake-Freja loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz
Nov 5 21:39:07 Mandrake-Freja keytable: Loading compose keys: compose.latin9.inc succeeded
Nov 5 21:39:07 Mandrake-Freja keytable: succeeded
Nov 5 21:39:07 Mandrake-Freja postfix: Starting postfix:
Nov 5 21:39:07 Mandrake-Freja postfix: postalias: warning: My hostname Mandrake-Freja is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
Nov 5 21:39:07 Mandrake-Freja postfix: postmap: warning: My hostname Mandrake-Freja is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
Nov 5 21:39:07 Mandrake-Freja last message repeated 4 times
Nov 5 21:39:08 Mandrake-Freja postfix: succeeded
Nov 5 21:39:08 Mandrake-Freja postfix: ^[[65G[^[[1;32m
Nov 5 21:39:08 Mandrake-Freja postfix:
Nov 5 21:39:09 Mandrake-Freja rc: Starting postfix: succeeded
Nov 5 21:39:10 Mandrake-Freja httpd2: httpd2: Could not determine the server's fully qualified domain name, using 172.16.1.16 for ServerName
Nov 5 21:39:11 Mandrake-Freja httpd: httpd2 startup succeeded
Nov 5 21:39:12 Mandrake-Freja numlock: Starting numlock: ^[[65G[^[[1;32m
Nov 5 21:39:12 Mandrake-Freja numlock:
Nov 5 21:39:12 Mandrake-Freja rc: Starting numlock: succeeded
Nov 5 21:39:12 Mandrake-Freja proftpd: proftpd startup succeeded
Nov 5 21:39:12 Mandrake-Freja proftpd[2056]: Mandrake-Freja - ProFTPD 1.2.7 (stable) (built Wed Jan 15 15:01:02 CET 2003) standalone mode STARTUP
Nov 5 21:39:12 Mandrake-Freja crond[2071]: (CRON) STARTUP (fork ok)
Nov 5 21:39:12 Mandrake-Freja crond: crond startup succeeded
Nov 5 21:39:13 Mandrake-Freja start: Starting Webmin server in /usr/share/webmin
Nov 5 21:39:13 Mandrake-Freja webmin: Starting Webmin succeeded
Nov 5 21:39:13 Mandrake-Freja smb: smbd startup succeeded
Nov 5 21:39:13 Mandrake-Freja smb: nmbd startup succeeded
Nov 5 21:39:14 Mandrake-Freja lisa: Starting lisa: succeeded
Nov 5 21:39:14 Mandrake-Freja rc: Starting kheader: succeeded
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: Caught SIGHUP
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: unknown group: "video", defaulting to GID=0
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//dvd.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//dynamic.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//rdvd.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//dvd2.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//rdvd2.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//mouse.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//psaux.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//modem.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfs/conf.d//ttyS0.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd[106]: read config file: "/etc/devfsd.conf"
Nov 5 21:39:14 Mandrake-Freja devfsd: Running devfsd actions: succeeded
Nov 5 21:39:15 Mandrake-Freja netconf: Checking kernel configuration
Nov 5 21:39:15 Mandrake-Freja linuxconf: Running Linuxconf hooks: succeeded
Nov 5 21:39:19 Mandrake-Freja kde3(pam_unix)[1289]: session opened for user ole by (uid=0)
nov 5 21:39:21 Mandrake-Freja gconfd (ole-2502): starter (version 2.2.0), pid 2502 bruger 'ole'
nov 5 21:39:21 Mandrake-Freja gconfd (ole-2502): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.mandatory" til en skrivebeskyttet konfigureringskilde ved position 0
nov 5 21:39:21 Mandrake-Freja gconfd (ole-2502): Bestemte adressen "xml:readwrite:/home/ole/.gconf" til en skrivbar konfigureringskilde ved position 1
nov 5 21:39:21 Mandrake-Freja gconfd (ole-2502): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.defaults" til en skrivebeskyttet konfigureringskilde ved position 2
Nov 5 21:39:22 Mandrake-Freja xinetd[2510]: warning: can't get client address: Transport endpoint is not connected
Nov 5 21:40:00 Mandrake-Freja CROND[2539]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:40:00 Mandrake-Freja CROND[2540]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/gate_news)
Nov 5 21:40:13 Mandrake-Freja smbd[2106]: [2003/11/05 21:40:13, 0] smbd/server.c:open_sockets(238)
Nov 5 21:40:13 Mandrake-Freja smbd[2106]: Got SIGHUP
Nov 5 21:40:13 Mandrake-Freja smb: smbd -HUP succeeded
Nov 5 21:41:00 Mandrake-Freja CROND[2554]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:42:00 Mandrake-Freja CROND[2590]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
nov 5 21:42:48 Mandrake-Freja gconfd (root-2623): starter (version 2.2.0), pid 2623 bruger 'root'
nov 5 21:42:48 Mandrake-Freja gconfd (root-2623): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.mandatory" til en skrivebeskyttet konfigureringskilde ved position 0
nov 5 21:42:48 Mandrake-Freja gconfd (root-2623): Bestemte adressen "xml:readwrite:/root/.gconf" til en skrivbar konfigureringskilde ved position 1
nov 5 21:42:48 Mandrake-Freja gconfd (root-2623): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.defaults" til en skrivebeskyttet konfigureringskilde ved position 2
Nov 5 21:43:00 Mandrake-Freja CROND[2625]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:44:00 Mandrake-Freja CROND[2629]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]: [2003/11/05 21:44:57, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(404)
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]: *****
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]:
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]: Samba name server MANDRAKE-FREJA is now a local master browser for workgroup MDKGROUP on subnet 172.16.1.16
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]:
Nov 5 21:44:57 Mandrake-Freja nmbd[2116]: *****
Nov 5 21:45:01 Mandrake-Freja CROND[2634]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:45:01 Mandrake-Freja CROND[2635]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/gate_news)
Nov 5 21:46:00 Mandrake-Freja CROND[2638]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:47:00 Mandrake-Freja CROND[2640]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:48:00 Mandrake-Freja CROND[2642]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
nov 5 21:48:48 Mandrake-Freja gconfd (root-2623): GConf-server er ikke i brug, lukker ned.
nov 5 21:48:48 Mandrake-Freja gconfd (root-2623): Afslutter
Nov 5 21:49:00 Mandrake-Freja CROND[2704]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:50:00 Mandrake-Freja CROND[2718]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
Nov 5 21:50:00 Mandrake-Freja CROND[2719]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/gate_news)
nov 5 21:50:49 Mandrake-Freja gconfd (root-2729): starter (version 2.2.0), pid 2729 bruger 'root'
nov 5 21:50:49 Mandrake-Freja gconfd (root-2729): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.mandatory" til en skrivebeskyttet konfigureringskilde ved position 0
nov 5 21:50:49 Mandrake-Freja gconfd (root-2729): Bestemte adressen "xml:readwrite:/root/.gconf" til en skrivbar konfigureringskilde ved position 1
nov 5 21:50:49 Mandrake-Freja gconfd (root-2729): Bestemte adressen "xml:readonly:/etc/gconf/gconf.xml.defaults" til en skrivebeskyttet konfigureringskilde ved position 2
Nov 5 21:51:00 Mandrake-Freja CROND[2731]: (mail) CMD (/usr/bin/python -S /var/lib/mailman/cron/qrunner)
nov 5 21:51:36 Mandrake-Freja su(pam_unix)[2735]: session opened for user root by ole(uid=501)
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found....
@ 2003-12-05 23:48 Jens-S. Voeckler
0 siblings, 0 replies; 31+ messages in thread
From: Jens-S. Voeckler @ 2003-12-05 23:48 UTC (permalink / raw
To: linux-smp
Hi,
the kernel message said to tell you - just in case I sent the whole dmesg
output for you, at the bottom. Note that, although both CPUs in the ASUS
P4S800 ACPI Rev 1004 go to work, the interrupts are not balanced:
# cat /proc/interrupts
CPU0 CPU1
0: 61728 0 IO-APIC-edge timer
1: 1186 0 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
12: 746 0 IO-APIC-edge PS/2 Mouse
14: 10095 1 IO-APIC-edge ide0
15: 4472 0 IO-APIC-edge ide1
18: 288 0 IO-APIC-level SiS SI7012
19: 3050 0 IO-APIC-level eth0
20: 0 0 IO-APIC-level acpi
23: 0 0 IO-APIC-level ehci_hcd
NMI: 0 0
LOC: 61641 61639
ERR: 0
MIS: 0
This is the output from the BIOS setting true for PnP OS - but it does not
appear to make a lot of a difference concerning that one CPU does not get
any load share of interrupts. When doing many intensive tasks in parallel,
it appears as if one CPU "saturates" before the other one is doing things.
# cat boot.log
Linux version 2.4.23 (root@dhcp-152-226.asci.uchicago.edu) (gcc version 3.3.2) #1 SMP Thu Dec 4 18:45:42 CST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 262140
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32764 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5850
ACPI: RSDT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
ACPI: BOOT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
ACPI: MADT (v001 ASUS P4S800 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
ACPI: DSDT (v001 ASUS P4S800 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3])
ACPI BALANCE SET
Using ACPI (MADT) for SMP configuration information
Kernel command line: ro root=/dev/hda3 hdc=ide-scsi vga=791 apm=off single
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2600.129 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5190.45 BogoMIPS
Memory: 1032836k/1048560k available (1897k kernel code, 15336k reserved, 607k data, 132k init, 131056k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
per-CPU timeslice cutoff: 1462.82 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5190.45 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
Total of 2 processors activated (10380.90 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2600.2865 MHz.
..... host bus clock speed is 200.0217 MHz.
cpu: 0, clocks: 2000217, slice: 666739
CPU0<T0:2000208,T1:1333456,D:13,S:666739,C:2000217>
cpu: 1, clocks: 2000217, slice: 666739
CPU1<T0:2000208,T1:666720,D:10,S:666739,C:2000217>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xf1100, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
00:00:02[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 003 03 0 0 0 0 0 1 1 71
0b 003 03 0 0 0 0 0 1 1 79
0c 003 03 0 0 0 0 0 1 1 81
0d 003 03 0 0 0 0 0 1 1 89
0e 003 03 0 0 0 0 0 1 1 91
0f 003 03 0 0 0 0 0 1 1 99
10 003 03 1 1 0 1 0 1 1 B1
11 003 03 1 1 0 1 0 1 1 B9
12 003 03 1 1 0 1 0 1 1 C1
13 003 03 1 1 0 1 0 1 1 C9
14 003 03 0 1 0 1 0 1 1 A9
15 003 03 1 1 0 1 0 1 1 D1
16 003 03 1 1 0 1 0 1 1 D9
17 003 03 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:20
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xf0000000, mapped to 0xf885e000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5490
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 256M @ 0xd0000000
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD400JB-00ENA0, ATA DISK drive
hdb: WDC WD2000JB-32FUA0, ATA DISK drive
blk: queue c03d3b40, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03d3c88, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/8192KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 390721968 sectors (200050 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 00:03.3 (0004 -> 0006)
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem f8806000
usb.c: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 18:46:52 Dec 4 2003
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding Swap: 2096472k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,65)) ...
for (ide0(3,65))
ide0(3,65):Using r5 hash to sort names
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-52327S Rev: QS0B
Type: CD-ROM ANSI SCSI revision: 02
hdc: DMA disabled
--
Ciao,
Dipl.-Ing. Jens-S. Vöckler voeckler at cs dot uchicago dot edu
University of Chicago; Research Institutes Building #402;
5640 South Ellis Avenue; Chicago, IL 60637-1433; USA; +1 773 834 6693
You can rely on NFS for only one thing - don't!
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2003-12-21 23:18 Luc Van Rompaey
0 siblings, 0 replies; 31+ messages in thread
From: Luc Van Rompaey @ 2003-12-21 23:18 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
Hi there,
I'm a SuSE Linux Professional 9.0 user, and my boot.msg file reports
that it finds an unexpected IO-APIC.
Since my kernel is less than three months old (I'm running "Linux
version 2.4.21-144-smp4G," which I installed through a YaST Online
Update run just yesterday), I am hereby reporting this, as the text in
the file asks me to do.
Please find attached to this message, the full contents of my boot.msg
file.
Best Greetings,
Luc Van Rompaey
[-- Attachment #2: boot.msg --]
[-- Type: text/plain, Size: 28234 bytes --]
Inspecting /boot/System.map-2.4.21-144-smp4G
Loaded 21746 symbols from /boot/System.map-2.4.21-144-smp4G.
Symbols match kernel version 2.4.21.
Loaded 546 symbols from 15 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-144-smp4G (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Fri Nov 14 00:07:01 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
<4> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
<4> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
<4> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>501MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0002000
<4>found SMP MP-table at 000ff780
<4>hm, page 000ff000 reserved twice.
<4>hm, page 00100000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 130864
<4>zone(0): 4096 pages.
<4>zone(1): 126768 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f9fb0
<6>ACPI: RSDT (v001 A M I OEMRSDT 01024.00802) @ 0x1ff30000
<6>ACPI: FADT (v002 A M I OEMFACP 01024.00802) @ 0x1ff30200
<6>ACPI: MADT (v001 A M I OEMAPIC 01024.00802) @ 0x1ff30390
<6>ACPI: OEMB (v001 A M I OEMBIOS 01024.00802) @ 0x1ff40040
<6>ACPI: DSDT (v001 P4C81 P4C81053 00000.00083) @ 0x00000000
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Building zonelist for node : 0
<4>Kernel command line: ro root=LABEL=suse-root hdc=ide-scsi
<6>ide_setup: hdc=ide-scsi
<6>Initializing CPU#0
<4>Detected 3006.861 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 6003.09 BogoMIPS
<6>Memory: 507844k/523456k available (1867k kernel code, 11008k reserved, 638k data, 188k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
<4>per-CPU timeslice cutoff: 1463.08 usecs.
<4>task migration cache decay timeout: 10 msecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<3>Error: only one processor found.
<4>WARNING: No sibling found for CPU 0.
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0020
<7>.... register #02: 00178020
<7>....... : arbitration: 00
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 1 1 0 0 0 1 1 71
<7> 0a 001 01 0 0 0 0 0 1 1 79
<7> 0b 001 01 0 0 0 0 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 06C 0C 1 0 0 0 0 0 2 FF
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 3006.9854 MHz.
<4>..... host bus clock speed is 200.4656 MHz.
<4>cpu: 0, clocks: 2004656, slice: 1002328
<4>CPU0<T0:2004656,T1:1002320,D:8,S:1002328,C:2004656>
<4>migration_task 0 on cpu=0
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>PCI: Probing PCI hardware
<7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1
<7>00:00:1f[A] -> 2-18 -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1
<7>00:00:1f[B] -> 2-17 -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1
<7>00:00:1d[A] -> 2-16 -> IRQ 16
<7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1
<7>00:00:1d[B] -> 2-19 -> IRQ 19
<7>Pin 2-18 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1
<7>00:00:1d[D] -> 2-23 -> IRQ 23
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1
<7>00:02:08[A] -> 2-20 -> IRQ 20
<7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1
<7>00:02:09[A] -> 2-21 -> IRQ 21
<7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1
<7>00:02:09[B] -> 2-22 -> IRQ 22
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-22 already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 32716
<5>aio_setup: sizeof(struct page) = 48
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX-4: IDE controller at PCI slot 00:1f.1
<4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
<6>PIIX-4: chipset revision 2
<6>PIIX-4: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: Maxtor 6Y120L0, ATA DISK drive
<4>hdb: Maxtor 6Y120L0, ATA DISK drive
<4>blk: queue c046ad40, I/O limit 4095Mb (mask 0xffffffff)
<4>blk: queue c046aea4, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: SONY DVD RW DRU-500A, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
<4>hdb: attached ide-disk driver.
<4>hdb: host protected area => 1
<6>hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
<6>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4
<6> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 >
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 1120k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<4> <Adaptec 29160 Ultra160 SCSI adapter>
<4> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<4>blk: queue df521618, I/O limit 4095Mb (mask 0xffffffff)
<4>(scsi0:A:1): 20.000MB/s transfers (20.000MHz, offset 15)
<4>(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
<4>(scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 16)
<4>(scsi0:A:8): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
<4> Vendor: IOMEGA Model: ZIP 100 Rev: E.08
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>blk: queue df521418, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>blk: queue df521818, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.05
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>blk: queue df52e818, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.05
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>blk: queue df521a18, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: QUANTUM Model: ATLAS10K2-TY367L Rev: DA40
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>blk: queue df521c18, I/O limit 4095Mb (mask 0xffffffff)
<4>scsi0:A:8:0: Tagged Queuing enabled. Depth 32
<4>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
<4>Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sense key Not Ready
<4>Additional sense indicates Medium not present
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<6> sda: I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> unable to read partition table
<4>SCSI device sdb: 71721820 512-byte hdwr sectors (36722 MB)
<6> sdb: sdb1 sdb2 sdb3 sdb4
<6>Journalled Block Device driver loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Freeing unused kernel memory: 188k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,18), internal journal
<6>device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,18), internal journal
<6>lvm-mp: allocating 42 lowmem entries at c215b000
<6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sense key Not Ready
<4>Additional sense indicates Medium not present
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<4>sda: Write Protect is off
<6> sda: I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> unable to read partition table
<6>Device not ready. Make sure there is a disc in the drive.
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sense key Not Ready
<4>Additional sense indicates Medium not present
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<4>sda: Write Protect is off
<6> sda: I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 2097144
<4> I/O error: dev 08:00, sector 0
<4> I/O error: dev 08:00, sector 0
<4> unable to read partition table
<6>Device not ready. Make sure there is a disc in the drive.
<4> I/O error: dev 08:00, sector 0
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,18), internal journal
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>NTFS driver 2.1.4a [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>NTFS volume version 3.1.
<6>Adding Swap: 1060248k swap-space (priority -1)
<4>hdc: attached ide-scsi driver.
<6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: SONY Model: DVD RW DRU-500A Rev: 1.0d
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>hdc: CHECK for good STATUS
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun Dec 21 20:54:26 2003
<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.md boot.device-mapper)
Run file system check on root for device mapper setup
fsck 1.34 (25-Jul-2003)
suse-root (/dev/sdb2): clean, 268175/1452480 files, 1253785/2899732 blocks
doneRemounting root file system (/) read/write...
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
Remounting root file system (/) read-only again...
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.lvm)
Run file system check on root for LVM activation
fsck 1.34 (25-Jul-2003)
suse-root (/dev/sdb2): clean, 268175/1452480 files, 1253785/2899732 blocks
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
suse-root (/dev/sdb2): clean, 268175/1452480 files, 1253785/2899732 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdb2 on /Other/Linux/Boot/Main type ext2 (rw)
/dev/hdb3 on /Other/Linux/Boot/Test type ext2 (rw)
/dev/hdb6 on /Other/Linux/Root/RedHat type ext3 (rw)
/dev/hda1 on /Other/Windows/Windows98/Windows98 type vfat (rw,shortname=mixed)
/dev/hdb1 on /Other/Windows/Windows98/X-Files type vfat (rw,shortname=mixed)
/dev/hda2 on /Other/Windows/Windows2000/System type ntfs (ro)
/dev/hda3 on /Other/Windows/Windows2000/TA102140W2KT type ntfs (ro)
/dev/hda4 on /Other/Windows/Windows2000/Test type ntfs (ro)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
Loading required kernel modules
doneRestore device permissionsdone
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up IDE DMA mode
/dev/hdc:
setting using_dma to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
using_dma = 1 (on)
done
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.quota)
<notice>exit status of (boot.quota) is (0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'suse-wkst1'done
Setting up loopback interface done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(42,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(42,3)
Boot logging started on /dev/tty1(/dev/console) at Sun Dec 21 21:54:34 2003
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn)
Initializing random number generatordone
<notice>exit status of (random isdn) is (0 0)
<notice>start services (network)
Setting up network interfaces:
lo done
eth0 IP/Netmask: 169.254.1.11 / 255.255.0.0 done
eth1 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -D -N -t 999999 -h suse-wkst1 eth1 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=18 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=25 HOME=/ SHLVL=4 sscripts=38 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
<notice>pidofproc: dhcpcd 672
IP/Netmask: 10.0.0.39 / 255.255.255.0done
ppp0 manual
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .. ]done
<notice>exit status of (hotplug) is (0)
<notice>start services (resmgr)
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>exit status of (resmgr) is (0)
<notice>start services (splash_early portmap)
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>exit status of (splash_early portmap) is (0 0)
<notice>start services (smbfs)
Mount SMB File System unused
<notice>exit status of (smbfs) is (6)
<notice>start services (sshd fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules (ac battery button fan processor thermal ) done
Starting acpid done
Starting SSH daemondone
Starting sound driver: emu10k1done
Restoring the previous sound settingdone
<notice>exit status of (sshd fbset alsasound acpid) is (0 0 0 0)
<notice>start services (splash kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Loading keymap azerty/be-latin1.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Stop Unicode mode
doneLoading console font lat1-16.psfu -m none (B
done<notice>exit status of (splash kbd cups) is (5 0 0)
<notice>start services (smpppd postfix hwscan)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting hardware scan on bootStarting SMPPPDdone
Starting mail service (Postfix)done
<notice>exit status of (smpppd postfix hwscan) is (0 0 0)
<notice>start services (xdm)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=35 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=en_GB PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_GB sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm) is (0)
<notice>start services (nscd cron)
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting Name Service Cache Daemondone
Starting CRON daemondone
<notice>exit status of (nscd cron) is (0 0)
<notice>start services (splash_late)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash
<notice>exit status of (splash_late) is (0)
<notice>killproc: kill(461,3)
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-01-07 11:25 Thorsten Sedeke
0 siblings, 0 replies; 31+ messages in thread
From: Thorsten Sedeke @ 2004-01-07 11:25 UTC (permalink / raw
To: linux-smp
Inspecting /boot/System.map-2.4.21-169-smp
Loaded 22002 symbols from /boot/System.map-2.4.21-169-smp.
Symbols match kernel version 2.4.21.
Loaded 191 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-169-smp (root@i386.suse.de) (gcc version 3.2.2) #1 SMP Fri Jan 2 19:10:04 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ff30000 (usable)
<4> BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data)
<4> BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS)
<4> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>128MB vmalloc/ioremap area available.
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0002000
<4>found SMP MP-table at 000ff780
<4>hm, page 000ff000 reserved twice.
<4>hm, page 00100000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 524080
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 294704 pages.
<6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f9e60
<6>ACPI: RSDT (v001 A M I OEMRSDT 01792.00801) @ 0x7ff30000
<6>ACPI: FADT (v002 A M I OEMFACP 01792.00801) @ 0x7ff30200
<6>ACPI: MADT (v001 A M I OEMAPIC 01792.00801) @ 0x7ff30390
<6>ACPI: OEMB (v001 A M I OEMBIOS 01792.00801) @ 0x7ff40040
<6>ACPI: DSDT (v001 P4C81 P4C81084 00000.00132) @ 0x00000000
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/sda5 vga=791
<6>Initializing CPU#0
<4>Detected 2605.968 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 5203.55 BogoMIPS
<6>Memory: 2057984k/2096320k available (1877k kernel code, 29628k reserved, 644k data, 184k init, 1178816k highmem)
<6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
<4>per-CPU timeslice cutoff: 1462.88 usecs.
<4>task migration cache decay timeout: 10 msecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 5203.55 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
<6>Total of 2 processors activated (10407.11 BogoMIPS).
<4>cpu_sibling_map[0] = 1
<4>cpu_sibling_map[1] = 0
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0020
<7>.... register #02: 00178020
<7>....... : arbitration: 00
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 068 08 1 0 0 0 0 0 2 10
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 003 03 0 0 0 0 0 1 1 51
<7> 06 003 03 0 0 0 0 0 1 1 59
<7> 07 003 03 0 0 0 0 0 1 1 61
<7> 08 003 03 0 0 0 0 0 1 1 69
<7> 09 003 03 1 1 0 0 0 1 1 71
<7> 0a 003 03 0 0 0 0 0 1 1 79
<7> 0b 003 03 0 0 0 0 0 1 1 81
<7> 0c 003 03 0 0 0 0 0 1 1 89
<7> 0d 003 03 0 0 0 0 0 1 1 91
<7> 0e 003 03 0 0 0 0 0 1 1 99
<7> 0f 003 03 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 2605.8304 MHz.
<4>..... host bus clock speed is 200.4483 MHz.
<4>cpu: 0, clocks: 2004483, slice: 668161
<4>CPU0<T0:2004480,T1:1336304,D:15,S:668161,C:2004483>
<4>cpu: 1, clocks: 2004483, slice: 668161
<4>CPU1<T0:2004480,T1:668144,D:14,S:668161,C:2004483>
<4>checking TSC synchronization across CPUs: passed.
<4>migration_task 0 on cpu=0
<4>migration_task 1 on cpu=1
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>PCI: Probing PCI hardware
<7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1
<7>00:00:1f[A] -> 2-18 -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1
<7>00:00:1f[B] -> 2-17 -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1
<7>00:00:1d[A] -> 2-16 -> IRQ 16
<7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1
<7>00:00:1d[B] -> 2-19 -> IRQ 19
<7>Pin 2-18 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1
<7>00:00:1d[D] -> 2-23 -> IRQ 23
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1
<7>00:02:08[A] -> 2-20 -> IRQ 20
<7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1
<7>00:02:09[A] -> 2-21 -> IRQ 21
<7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1
<7>00:02:09[B] -> 2-22 -> IRQ 22
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-23 already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: disabled - APM is not SMP safe.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 131020
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881b000, size 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
<6>vesafb: protected mode interface info at c000:b7d0
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture.... found (1024x768, 19160 bytes, v2).
<4>Console: switching to colour frame buffer device 125x42
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX-4: IDE controller at PCI slot 00:1f.1
<4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
<6>PIIX-4: chipset revision 2
<6>PIIX-4: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
<4>hda: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>ide-floppy driver 0.99.newide
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 16384 buckets, 128Kbytes
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 1160k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<4>3ware Storage Controller device driver for Linux v1.02.00.032.
<5>scsi0 : Found a 3ware Storage Controller at 0xdfa0, IRQ: 23, P-chip: 1.3
<6>scsi0 : 3ware Storage Controller
<4>blk: queue c286ae18, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: 3ware Model: Logical Disk 0 Rev: 1.0
<4> Type: Direct-Access ANSI SCSI revision: 00
<4>blk: queue c286ac18, I/O limit 4095Mb (mask 0xffffffff)
<4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>SCSI device sda: 937739136 512-byte hdwr sectors (480122 MB)
<6>Partition check:
<6> sda: sda1 < sda5 sda6 sda7 sda8 >
<6>aec671x_detect:
<6> ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:df00, IRQ:20.
<6> ID: 5 Quantum DLT4000 DA97
<6> ID: 7 Host Adapter
<6>scsi1 : ACARD AEC-6710/6712/67160 PCI Ultra/W/LVD SCSI-3 Adapter Driver V2.6+ac
<4> Vendor: Quantum Model: DLT4000 Rev: DA97
<4> Type: Sequential-Access ANSI SCSI revision: 02
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device sd(8,5)) ...
<4>for (sd(8,5))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 184k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>reiserfs: enabling write barrier flush mode
<6>lvm-mp: allocating 42 lowmem entries at f546a000
<6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
<4>reiserfs: enabling write barrier flush mode
<6>Adding Swap: 1052216k swap-space (priority 42)
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device sd(8,8)) ...
<4>for (sd(8,8))
<4>Using r5 hash to sort names
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using writeback data mode
<4>reiserfs: checking transaction log (device sd(8,7)) ...
<4>for (sd(8,7))
<4>Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Jan 7 12:49:26 2004
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x805 of format 3.6 with standard journal
Blocks (total/free): 526113/177206 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
Reiserfs super block in block 16 on 0x808 of format 3.6 with standard journal
Blocks (total/free): 89642692/81650174 by 4096 bytes
Filesystem is clean
Replaying journal..
0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x807 of format 3.6 with standard journal
Blocks (total/free): 26776330/25300063 by 4096 bytes
Filesystem is clean
Replaying journal..
0 transactions replayed
Checking internal tree..finished
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda8 on /home type reiserfs (rw,acl,usrquota)
/dev/sda7 on /var type reiserfs (rw,noatime,data=writeback)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'server'
done
Setting up loopback interface
done
Enabling syn flood protection
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
done<notice>killproc: kill(40,29)
Boot logging started on /dev/tty1(/dev/console) at Wed Jan 7 12:50:25 2004
Master Resource Control: previous runlevel: N, switching to runlevel:
5
Initializing random number generator
done
Setting up network interfaces:
lo
done
eth0 IP/Netmask: 192.168.8.82 / 255.255.255.0
done
Running /etc/init.d/boot.local
done<notice>killproc: kill(40,3)
INIT: Entering runlevel: 5
<notice>/etc/init.d/rc5.d/S01random start
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/frox/dev/log -a /var/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c
done
1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hotplug start
Starting hotplugging services [ net pci usb .. ]
done
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S09cyrus start
Starting IMAP/POP3 service (cyrus-imapd)<notice>startproc: execve (/usr/lib/cyrus/bin/master) [ /usr/lib/cyrus/bin/master ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/cyrus/bin/master ]
done
<notice>'/etc/init.d/rc5.d/S09cyrus start' exits with status 0
<notice>/etc/init.d/rc5.d/S09nmb start
Starting Samba ldap NMB daemon <notice>startproc: execve (/usr/lib/samba/ldap/nmbd) [ /usr/lib/samba/ldap/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/ldap/nmbd ]
done
<notice>'/etc/init.d/rc5.d/S09nmb start' exits with status 0
<notice>/etc/init.d/rc5.d/S09portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
Starting service saslauthd<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S09saslauthd start
<notice>startproc: execve (/usr/sbin/saslauthd) [ /usr/sbin/saslauthd -a pam ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/saslauthd ]
done
<notice>'/etc/init.d/rc5.d/S09saslauthd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09sysMonitor start
Starting sysMonitor <notice>startproc: execve (/usr/lib/sysMonitor/rrdtimer) [ /usr/lib/sysMonitor/rrdtimer Dp ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/sysMonitor/rrdtimer ]
done
<notice>'/etc/init.d/rc5.d/S09sysMonitor start' exits with status 0
<notice>/etc/init.d/rc5.d/S10nfslock start
Starting NFS file locking daemon
done
Starting NFS stat daemon <notice>startproc: execve (/sbin/rpc.statd) [ /sbin/rpc.statd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/rpc.statd ]
done
Mount SMB File System
unused
<notice>'/etc/init.d/rc5.d/S10nfslock start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smbfs start
<notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 6
<notice>/etc/init.d/rc5.d/S13alsasound start
Starting sound driver
done
<notice>'/etc/init.d/rc5.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S13dracd start
Starting service DRAC<notice>startproc: execve (/usr/sbin/rpc.dracd) [ /usr/sbin/rpc.dracd -i -e 5 /etc/postfix/dracd.db ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/rpc.dracd ]
done
<notice>'/etc/init.d/rc5.d/S13dracd start' exits with status 0
<notice>/etc/init.d/rc5.d/S13fbset start
<notice>'/etc/init.d/rc5.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S13ldap start
Starting ldap-server<notice>startproc: execve (/usr/lib/openldap/slapd) [ /usr/lib/openldap/slapd -h ldap:/// ldaps:/// -u ldap -g mail ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/openldap/slapd ]
done
<notice>'/etc/init.d/rc5.d/S13ldap start' exits with status 0
<notice>/etc/init.d/rc5.d/S13named start
Starting name server BIND 9 <notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/sbin:/usr/sbin:/bin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/named ]
done
<notice>'/etc/init.d/rc5.d/S13named start' exits with status 0
<notice>/etc/init.d/rc5.d/S13quota start
Turning on quota
/dev/sda8 [/home]: user quotas turned on
done
<notice>'/etc/init.d/rc5.d/S13quota start' exits with status 0
<notice>/etc/init.d/rc5.d/S13raw start
<notice>'/etc/init.d/rc5.d/S13raw start' exits with status 0
<notice>/etc/init.d/rc5.d/S13rpmconfigcheck start
Searching for unresolved configuration files
done
Please check the following files (see /var/adm/rpmconfigcheck):
/etc/cups/mime.convs.rpmnew
/etc/cups/mime.types.rpmnew
/etc/named.conf.rpmnew
<notice>'/etc/init.d/rc5.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S13sessiond start
Starting sessiond <notice>startproc: execve (/usr/bin/sessiond) [ /usr/bin/sessiond -I 127.0.0.1 -P 33333 -c -n 1000 -S 5 -l ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/bin/sessiond ]
done
<notice>'/etc/init.d/rc5.d/S13sessiond start' exits with status 0
<notice>/etc/init.d/rc5.d/S13spamd start
Starting spamd <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d -c -a -L -u nobody ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
done
<notice>'/etc/init.d/rc5.d/S13spamd start' exits with status 0
<notice>/etc/init.d/rc5.d/S14cups start
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>'/etc/init.d/rc5.d/S14cups start' exits with status 0
<notice>/etc/init.d/rc5.d/S14kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneKeyboard: Typematic Rate set to 24.0 cps (delay = 500 ms)
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S14kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S14oracle start
#############################################################################
# Begin of O R A C L E startup section #
#############################################################################
SETTINGS start from /etc/sysconfig/oracle
- Set Kernel Parameters for Oracle: yes
- Start Oracle OCFS: no
- Start Oracle OCM: no
- Start Oracle GSD: no
- Start Oracle Database: yes
- Start Oracle Listener: yes
- Start Oracle Webserver: yes
- Start Oracle CManager: no
- Start Oracle Agent: yes
- Start Oracle Internet Filesystem: no
- Start Oracle Directory Manager: no
Setting kernel parameters for Oracle, see file
/etc/sysconfig/oracle for explanations.
Shared memory: SHMMAX=3294967296 SHMMNI=4096 SHMALL=2097152
Semaphore values: SEMMSL=1250 SEMMNS=32000 SEMOPM=100 SEMMNI=256
Other values: FILE_MAX_KERNEL=131072 IP_LOCAL_PORT_RANGE=1024 65000
VM_MAPPED_RATIO=1000 AIO_MAX_SIZE=262144
ULIMIT values: MAX_CORE_FILE_SIZE_SHELL=unlimited
FILE_MAX_SHELL=65536 PROCESSES_MAX_SHELL=16384
Kernel parameters set for Oracle:
done
- Starting Oracle Cluster Filesystem...
unused
- Starting Oracle Cluster Manager...
unused
- Starting Oracle GSD...
unused
+ Starting Database(s)...
Can't find init file for Database "sfgb".
Database "sfgb" NOT started.
Status of Oracle database(s) start:
done
- Starting Listener...
done
- Starting Apache...
done
- Starting Agent...
done
- Starting Connection Manager...
unused
- Starting Oracle Internet Filesystem...
unused
- Starting Oracle Internet Directory...
unused
#############################################################################
# End of O R A C L E section #
#############################################################################
<notice>'/etc/init.d/rc5.d/S14oracle start' exits with status 0
<notice>/etc/init.d/rc5.d/S14splash start
<notice>'/etc/init.d/rc5.d/S14splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S14suad start
Starting suad <notice>startproc: execve (/usr/sbin/suad) [ /usr/sbin/suad -I 127.0.0.1 -P 33333 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/suad ]
done
<notice>'/etc/init.d/rc5.d/S14suad start' exits with status 0
<notice>/etc/init.d/rc5.d/S15hwscan start
Starting hardware scan on boot<notice>Starting kernel based NFS server'/etc/init.d/rc5.d/S15hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S15nfsserver start
<notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
done
<notice>'/etc/init.d/rc5.d/S15nfsserver start' exits with status 0
<notice>/etc/init.d/rc5.d/S15postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc5.d/S15postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S15smb start
Samba SMB: Waiting for cupsd to get ready
done
Starting Samba ldap SMB daemon <notice>startproc: execve (/usr/lib/samba/ldap/smbd) [ /usr/lib/samba/ldap/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/lib/samba/ldap/smbd ]
done
<notice>'/etc/init.d/rc5.d/S15smb start' exits with status 0
<notice>/etc/init.d/rc5.d/S15xntpd start
Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -U ntp ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
done
<notice>'/etc/init.d/rc5.d/S15xntpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S16fetchd start
Starting fetchd <notice>startproc: execve (/usr/sbin/fetchd.pl) [ /usr/sbin/fetchd.pl ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/fetchd.pl ]
done
<notice>'/etc/init.d/rc5.d/S16fetchd start' exits with status 0
<notice>/etc/init.d/rc5.d/S16mailgraph start
Starting mailgraph <notice>startproc: execve (/usr/sbin/mailgraph.pl) [ /usr/sbin/mailgraph.pl -l /var/log/mail ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/mailgraph.pl ]
done
<notice>'/etc/init.d/rc5.d/S16mailgraph start' exits with status 0
<notice>/etc/init.d/rc5.d/S16xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=791 RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=lp RC_LANG=de_DE@euro LC_CTYPE=de_DE@euro LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S16xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S17apache start
Starting httpd [ PERL SSL ]<notice>startproc: execve (/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf -D SSL ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LD_LIBRARY_PATH=:/lib INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 DBROOT=/dev/null HOME=/ SHLVL=2 ORACLE_HOME= _=/sbin/startproc DAEMON=/usr/sbin/httpd ]
adding language DE
adding language CZ
adding language EN
adding language ES
adding language HU
adding language IT
done
<notice>'/etc/init.d/rc5.d/S17apache start' exits with status 0
<notice>Starting service at daemon/etc/init.d/rc5.d/S17atd start
<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S17atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S17cron start
Starting CRON daemon
done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>'/etc/init.d/rc5.d/S17cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S17frox start
Starting Frox (outbound transparent FTP proxy) <notice>startproc: execve (/usr/sbin/frox) [ /usr/sbin/frox ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/frox ]
[chroot]
done
<notice>'/etc/init.d/rc5.d/S17frox start' exits with status 0
<notice>/etc/init.d/rc5.d/S17nscd start
Starting Name Service Cache Daemon
done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>'/etc/init.d/rc5.d/S17nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S18squid start
Starting WWW-proxy squid <notice>startproc: execve (/usr/sbin/squid) [ /usr/sbin/squid -sYD ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=125 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=42 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/squid ]
done
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: smbfs
<notice>'/etc/init.d/rc5.d/S18squid start' exits with status 0
<notice>/etc/init.d/rc5.d/S21splash_late start
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
<notice>killproc: kill(237,3)
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-02-01 9:58 Reiner Miericke
0 siblings, 0 replies; 31+ messages in thread
From: Reiner Miericke @ 2004-02-01 9:58 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 24 bytes --]
Regards
Reiner Miericke
[-- Attachment #2: boot.messages --]
[-- Type: text/plain, Size: 15273 bytes --]
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #4 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 4
Building zonelist for node : 0
Kernel command line: root=/dev/sda5 vga=0x317 hda=ide-scsi hdalun=0 acpi=off desktop splash=silent
ide_setup: hda=ide-scsi
ide_setup: hdalun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 2405.863 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4751.36 BogoMIPS
Memory: 1023276k/1048512k available (1874k kernel code, 16528k reserved, 638k data, 188k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
per-CPU timeslice cutoff: 1463.08 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4800.51 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Booting processor 2/6 eip 3000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4800.51 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#2.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Booting processor 3/7 eip 3000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4800.51 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#3.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Total of 4 processors activated (19152.89 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
cpu_sibling_map[2] = 3
cpu_sibling_map[3] = 2
ENABLING IO-APIC IRQs
Setting 4 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 4 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 4-0, 4-5, 4-9, 4-11, 4-20, 4-21 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 25.
number of IO-APIC #4 registers: 24.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 00F 0F 0 0 0 0 0 1 1 39
02 00F 0F 0 0 0 0 0 1 1 31
03 00F 0F 0 0 0 0 0 1 1 41
04 00F 0F 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 00F 0F 0 0 0 0 0 1 1 51
07 00F 0F 0 0 0 0 0 1 1 59
08 00F 0F 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 00F 0F 0 0 0 0 0 1 1 69
0b 000 00 1 0 0 0 0 0 0 00
0c 00F 0F 0 0 0 0 0 1 1 71
0d 00F 0F 0 0 0 0 0 1 1 79
0e 00F 0F 0 0 0 0 0 1 1 81
0f 00F 0F 0 0 0 0 0 1 1 89
10 00F 0F 1 1 0 1 0 1 1 91
11 00F 0F 1 1 0 1 0 1 1 99
12 00F 0F 1 1 0 1 0 1 1 A1
13 00F 0F 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 00F 0F 1 1 0 1 0 1 1 B1
17 00F 0F 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2429.0057 MHz.
..... host bus clock speed is 134.0947 MHz.
cpu: 0, clocks: 134947, slice: 26989
CPU0<T0:134944,T1:107952,D:3,S:26989,C:134947>
cpu: 1, clocks: 134947, slice: 26989
cpu: 2, clocks: 134947, slice: 26989
cpu: 3, clocks: 134947, slice: 26989
CPU1<T0:134944,T1:80960,D:6,S:26989,C:134947>
CPU2<T0:134944,T1:53968,D:9,S:26989,C:134947>
CPU3<T0:134944,T1:26976,D:12,S:26989,C:134947>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
migration_task 2 on cpu=2
migration_task 3 on cpu=3
ACPI: Subsystem revision 20030619
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfbac0, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I10,P0) -> 22
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 65532
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xf0000000, mapped to 0xf8810000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:7d20
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 22326 bytes, found (1024x768, 11098 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 118x38
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5-SATA: IDE controller at PCI slot 00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
hdb: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
hdc: ST3160023AS, ATA DISK drive
blk: queue c047cfe8, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hdc: hdc1 hdc2 hdc3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 394k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
ncr53c8xx: at PCI bus 3, device 10, function 0
ncr53c8xx: 53c895 detected
ncr53c895-0: rev 0x1 on pci bus 3 device 10 function 0 irq 22
ncr53c895-0: ID 7, Fast-40, Parity Checking
scsi0 : ncr53c8xx-3.4.3b-20010512
Vendor: IBM Model: DPSS-336950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
ncr53c895-0-<1,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
SCSI device sda: 72170880 512-byte hdwr sectors (36951 MB)
sda: sda1 sda2 < sda5 > sda3
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device sd(8,5)) ...
for (sd(8,5))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 188k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c263c000
LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 730948k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdb: attached ide-cdrom driver.
hdb: ATAPI 48X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hda: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Intel(R) PRO/1000 Network Driver - version 5.2.16
Copyright (c) 1999-2003 Intel Corporation.
PCI: Setting latency timer of device 02:01.0 to 64
eth0: Intel(R) PRO/1000 Network Connection
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2 Enhanced Host Controller
ehci_hcd 00:1d.7: irq 23, pci mem fa97d000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 32.
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 16:53:01 Dec 19 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xbc00, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
mice: PS/2 mouse device common for all mice
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 48000
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
eth0: no IPv6 routers present
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux video capture interface: v1.00
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-02-03 0:11 Aron Lentsch
0 siblings, 0 replies; 31+ messages in thread
From: Aron Lentsch @ 2004-02-03 0:11 UTC (permalink / raw
To: linux-smp
[-- Attachment #1.1: Type: text/plain, Size: 974 bytes --]
Found the following message in my kernel:
--------------------------------------------------------------
An unexpected IO-APIC was found. If this kernel release is less
than
three months old please report this to linux-smp@vger.kernel.org
--------------------------------------------------------------
I tried installing kernel 2.4.24. For details please see attached
dmesg output
as well as my kernel configuration file .config. I just
recompiled the
kernel with 'make mrproper' and the unchanged config file - the
problem
persists.
The problem expressis itself through the strange behaviour of my
USB bus.
Only he front-side hub/port is working, not the one in the bask.
Hope this helps!
Please email if you need more details,
Cheers,
Aron
--
| A r o n L E N T S C H
|
| 178, rue P. Vaillant Couturier
| 94140 Alfortville - FRANCE
|
| home: aron.lentsch@gmx.net | +33-1-4353-2433
| office: aron.lentsch@cnes.fr | +33-1-6087-7324
[-- Attachment #1.2: dmesg_ioacpi_problem --]
[-- Type: application/octet-stream, Size: 13237 bytes --]
Linux version 2.4.24 (root@nipper) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon Feb 2 23:45:11 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dffc000 (usable)
BIOS-e820: 000000000dffc000 - 000000000dfff000 (ACPI data)
BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
223MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 57340
zone(0): 4096 pages.
zone(1): 53244 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f57c0
ACPI: RSDT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0dffc000
ACPI: FADT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0dffc0c0
ACPI: BOOT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0dffc030
ACPI: MADT (v001 ASUS P4S8L 0x42302e31 MSFT 0x31313031) @ 0x0dffc058
ACPI: DSDT (v001 ASUS P4S8L 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x14] polarity[0x3] trigger[0x3])
ACPI BALANCE SET
Using ACPI (MADT) for SMP configuration information
Kernel command line: root=/dev/hda3
Initializing CPU#0
Detected 2000.197 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 223440k/229360k available (1700k kernel code, 5532k reserved, 590k data, 156k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2000.1349 MHz.
..... host bus clock speed is 100.0065 MHz.
cpu: 0, clocks: 1000065, slice: 500032
CPU0<T0:1000064,T1:500032,D:0,S:500032,C:1000065>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xf1070, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xa9 -> IRQ 20 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
00:00:02[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-16 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 71
0b 001 01 0 0 0 0 0 1 1 79
0c 001 01 0 0 0 0 0 1 1 81
0d 001 01 0 0 0 0 0 1 1 89
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 001 01 1 1 0 1 0 1 1 B1
11 001 01 1 1 0 1 0 1 1 B9
12 001 01 1 1 0 1 0 1 1 C1
13 001 01 1 1 0 1 0 1 1 C9
14 001 01 0 1 0 1 0 1 1 A9
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:20
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
floppy0: no floppy controllers found
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
hda: Maxtor 6Y160P0, ATA DISK drive
hdb: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
blk: queue c03abae0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 320173056 sectors (163929 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 218k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,3)) ...
for (ide0(3,3))
ide0(3,3):Using r5 hash to sort names
Freeing unused kernel memory: 156k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xce8e6000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xce8e8000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xce8ea000, IRQ 22
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:03.0-1, assigned address 2
input: USB HID v1.10 Keyboard [Zippy RF Keyboard Mouse] on usb1:2.0
input: USB HID v1.10 Mouse [Zippy RF Keyboard Mouse] on usb1:2.1
LVM version 1.0.7(28/03/2003) module loaded
hub.c: new USB device 00:03.2-2, assigned address 2
input: USB HID v1.10 Mouse [ELECOM ELECOM USB mouse with wheel ] on usb3:2.0
loop: loaded (max 8 devices)
Adding Swap: 987988k swap-space (priority -1)
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,7)) ...
for (ide0(3,7))
ide0(3,7):Using r5 hash to sort names
NTFS driver v1.1.22 [Flags: R/O MODULE]
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[df000000-df0007ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000437875]
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1791 buckets, 14328 max) - 292 bytes per conntrack
b44.c:v0.92 (Nov 4, 2003)
divert: allocating divert_blk for eth0
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0e:a6:0d:cb:ec
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
Intel 810 + AC97 Audio, version 0.24, 00:40:37 Feb 3 2004
i810: SiS 7012 found at IO 0x9000 and 0x9400, MEM 0x0000 and 0x0000, IRQ 18
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
[-- Attachment #1.3: .config --]
[-- Type: application/octet-stream, Size: 38772 bytes --]
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_F00F_WORKS_OK=y
CONFIG_X86_MCE=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
CONFIG_EISA=y
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_TCIC=y
CONFIG_I82092=y
CONFIG_I82365=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_RELAXED_AML is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_CISS_MONITOR_THREAD is not set
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_STATS=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_LVM=m
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_LOCAL=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_KHTTPD is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
# CONFIG_IP_SCTP is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_VLAN_8021Q=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_BRIDGE=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_ISAPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA100=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_AMD74XX_OVERRIDE is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_ATARAID=m
CONFIG_BLK_DEV_ATARAID_PDC=m
CONFIG_BLK_DEV_ATARAID_HPT=m
CONFIG_BLK_DEV_ATARAID_SII=m
#
# SCSI support
#
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=4
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=253
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_ENABLE_RD_STRM=y
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT=y
CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_OLD_PROC_STATS=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
# CONFIG_SCSI_MEGARAID2 is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PCI2000=m
CONFIG_SCSI_PCI2220I=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_SCSI_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=m
# CONFIG_FUSION_BOOT is not set
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_ISENSE is not set
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_NET_FC=y
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_LAN=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
CONFIG_NET_SB1000=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
# CONFIG_ULTRAMCA is not set
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_CS89x0=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
CONFIG_DE4X5=m
CONFIG_DGRS=m
CONFIG_DM9102=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_WINBOND_840=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m
CONFIG_AIRONET4500=m
CONFIG_AIRONET4500_NONCS=m
CONFIG_AIRONET4500_PNP=y
CONFIG_AIRONET4500_PCI=y
CONFIG_AIRONET4500_ISA=y
CONFIG_AIRONET4500_I365=y
CONFIG_AIRONET4500_PROC=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_NET_WIRELESS=y
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_TMSISA=m
CONFIG_ABYSS=m
# CONFIG_MADGEMC is not set
CONFIG_SMCTR=m
CONFIG_NET_FC=y
CONFIG_IPHASE5526=m
CONFIG_RCPCI=m
CONFIG_SHAPER=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
# CONFIG_COMX is not set
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
CONFIG_ATI_XX20=m
CONFIG_SEALEVEL_4021=m
# CONFIG_SYNCLINK_SYNCPPP is not set
# CONFIG_HDLC is not set
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_VENDOR_SANGOMA=m
CONFIG_WANPIPE_CHDLC=y
CONFIG_WANPIPE_FR=y
CONFIG_WANPIPE_X25=y
CONFIG_WANPIPE_PPP=y
CONFIG_WANPIPE_MULTPPP=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# ATM drivers
#
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_ZATM_EXACT_TS=y
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_HE is not set
#
# Amateur Radio support
#
CONFIG_HAMRADIO=m
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
# CONFIG_DMASCC is not set
# CONFIG_SCC is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_BAYCOM_PAR is not set
# CONFIG_BAYCOM_EPP is not set
CONFIG_SOUNDMODEM=m
CONFIG_SOUNDMODEM_SBC=y
CONFIG_SOUNDMODEM_WSS=y
CONFIG_SOUNDMODEM_AFSK1200=y
CONFIG_SOUNDMODEM_AFSK2400_7=y
CONFIG_SOUNDMODEM_AFSK2400_8=y
CONFIG_SOUNDMODEM_AFSK2666=y
CONFIG_SOUNDMODEM_HAPN4800=y
CONFIG_SOUNDMODEM_PSK4800=y
CONFIG_SOUNDMODEM_FSK9600=y
# CONFIG_YAM is not set
#
# IrDA (infrared) support
#
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_USB_IRDA=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_OLD=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_BOOL=y
CONFIG_ISDN_PPP=y
# CONFIG_IPPP_FILTER is not set
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
# CONFIG_ISDN_DIVERSION is not set
#
# Passive ISDN cards
#
CONFIG_ISDN_DRV_HISAX=m
CONFIG_ISDN_HISAX=y
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=m
CONFIG_HISAX_DEBUG=y
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_USB_AUERISDN=m
#
# Active ISDN cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_ISDN_DRV_EICON=m
CONFIG_ISDN_DRV_EICON_DIVAS=m
# CONFIG_ISDN_DRV_EICON_OLD is not set
CONFIG_ISDN_DRV_TPAM=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_EXTENDED=y
CONFIG_SERIAL_MANY_PORTS=y
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
# CONFIG_HUB6 is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
# CONFIG_SCx200_I2C is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# Mice
#
CONFIG_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_LOGIBUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
CONFIG_MK712_MOUSE=m
#
# Joysticks
#
CONFIG_INPUT_GAMEPORT=m
CONFIG_INPUT_NS558=m
CONFIG_INPUT_LIGHTNING=m
CONFIG_INPUT_PCIGAME=m
CONFIG_INPUT_CS461X=m
CONFIG_INPUT_EMU10K1=m
CONFIG_INPUT_SERIO=m
CONFIG_INPUT_SERPORT=m
CONFIG_INPUT_ANALOG=m
CONFIG_INPUT_A3D=m
CONFIG_INPUT_ADI=m
CONFIG_INPUT_COBRA=m
CONFIG_INPUT_GF2K=m
CONFIG_INPUT_GRIP=m
CONFIG_INPUT_INTERACT=m
CONFIG_INPUT_TMDC=m
CONFIG_INPUT_SIDEWINDER=m
CONFIG_INPUT_IFORCE_USB=m
CONFIG_INPUT_IFORCE_232=m
CONFIG_INPUT_WARRIOR=m
CONFIG_INPUT_MAGELLAN=m
CONFIG_INPUT_SPACEORB=m
CONFIG_INPUT_SPACEBALL=m
CONFIG_INPUT_STINGER=m
CONFIG_INPUT_DB9=m
CONFIG_INPUT_GAMECON=m
CONFIG_INPUT_TURBOGRAFX=m
# CONFIG_QIC02_TAPE is not set
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_PCWATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_WAFER_WDT=m
CONFIG_I810_TCO=m
# CONFIG_MIXCOMWD is not set
# CONFIG_60XX_WDT is not set
CONFIG_SC1200_WDT=m
# CONFIG_SCx200_WDT is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_W83877F_WDT=m
CONFIG_WDT=m
CONFIG_WDTPCI=m
# CONFIG_WDT_501 is not set
CONFIG_MACHZ_WDT=m
CONFIG_AMD7XX_TCO=m
# CONFIG_SCx200_GPIO is not set
CONFIG_AMD_RNG=m
CONFIG_INTEL_RNG=m
# CONFIG_HW_RANDOM is not set
CONFIG_AMD_PM768=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD_K8 is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_ATI is not set
#
# Direct Rendering Manager (XFree86 DRI support)
#
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
CONFIG_DRM_NEW=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
# CONFIG_DRM_I810_XFREE_41 is not set
CONFIG_DRM_I830=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
#
# PCMCIA character devices
#
CONFIG_PCMCIA_SERIAL_CS=m
CONFIG_SYNCLINK_CS=m
CONFIG_MWAVE=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
CONFIG_I2C_PARPORT=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZR36120=m
CONFIG_VIDEO_MEYE=m
#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_MIROPCM20_RDS=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
#
# File systems
#
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_JFS_FS=m
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_MINIX_FS=m
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_RW=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_ZISOFS_FS=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_RIVA=m
CONFIG_FB_CLGEN=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_PM2_PCI=y
CONFIG_FB_PM3=m
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=m
CONFIG_FB_HGA=m
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G450 is not set
CONFIG_FB_MATROX_G100A=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
# CONFIG_FB_MATROX_PROC is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_ATY128=m
# CONFIG_FB_INTEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_3DFX=m
CONFIG_FB_VOODOO1=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_VGA_PLANES=m
CONFIG_FBCON_HGA=m
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=m
CONFIG_SOUND_ALI5455=m
# CONFIG_SOUND_ALI5455_CODECSPDIFOUT_PCMOUTSHARE is not set
# CONFIG_SOUND_ALI5455_CODECSPDIFOUT_CODECINDEPENDENTDMA is not set
# CONFIG_SOUND_ALI5455_CONTROLLERSPDIFOUT_PCMOUTSHARE is not set
# CONFIG_SOUND_ALI5455_CONTROLLERSPDIFOUT_CONTROLLERINDEPENDENTDMA is not set
CONFIG_SOUND_BT878=m
CONFIG_SOUND_CMPCI=m
CONFIG_SOUND_CMPCI_FM=y
CONFIG_SOUND_CMPCI_FMIO=388
CONFIG_SOUND_CMPCI_FMIO=388
CONFIG_SOUND_CMPCI_MIDI=y
CONFIG_SOUND_CMPCI_MPUIO=330
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_CMPCI_CM8738=y
# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set
CONFIG_SOUND_CMPCI_SPDIFLOOP=y
CONFIG_SOUND_CMPCI_SPEAKERS=2
CONFIG_SOUND_EMU10K1=m
CONFIG_MIDI_EMU10K1=m
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_FORTE=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_RME96XX=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_AD1889=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
CONFIG_SOUND_GUS16=y
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_PAS=m
# CONFIG_PAS_JOYSTICK is not set
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_KAHLUA=m
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
CONFIG_SOUND_YMFPCI_LEGACY=y
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=m
# CONFIG_SOUND_AD1980 is not set
# CONFIG_SOUND_WM97XX is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
# CONFIG_USB_SL811HS_ALT is not set
# CONFIG_USB_SL811HS is not set
CONFIG_USB_AUDIO=m
# CONFIG_USB_EMI26 is not set
CONFIG_USB_MIDI=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=m
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_DC2XX is not set
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m
# CONFIG_USB_W9968CF is not set
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_DABUSB=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_KAWETH=m
CONFIG_USB_CATC=m
# CONFIG_USB_AX8817X is not set
CONFIG_USB_CDCETHER=m
CONFIG_USB_USBNET=m
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_TIGL=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
# CONFIG_USB_SPEEDTOUCH is not set
#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
CONFIG_BLUEZ=m
CONFIG_BLUEZ_L2CAP=m
CONFIG_BLUEZ_SCO=m
CONFIG_BLUEZ_RFCOMM=m
CONFIG_BLUEZ_RFCOMM_TTY=m
CONFIG_BLUEZ_BNEP=m
CONFIG_BLUEZ_BNEP_MC_FILTER=m
CONFIG_BLUEZ_BNEP_PROTO_FILTER=m
# CONFIG_BLUEZ_CMTP is not set
#
# Bluetooth device drivers
#
CONFIG_BLUEZ_HCIUSB=m
CONFIG_BLUEZ_USB_SCO=m
CONFIG_BLUEZ_HCIUART=m
CONFIG_BLUEZ_HCIUART_H4=m
CONFIG_BLUEZ_HCIUART_BCSP=m
# CONFIG_BLUEZ_HCIUART_BCSP_TXCRC is not set
# CONFIG_BLUEZ_HCIBFUSB is not set
CONFIG_BLUEZ_HCIDTL1=m
CONFIG_BLUEZ_HCIBT3C=m
CONFIG_BLUEZ_HCIBLUECARD=m
CONFIG_BLUEZ_HCIBTUART=m
CONFIG_BLUEZ_HCIVHCI=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_LOG_BUF_SHIFT=0
#
# Cryptographic options
#
CONFIG_CRYPTO=m
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
# CONFIG_FW_LOADER is not set
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-02-11 8:58 Michael Ben-Gershon
0 siblings, 0 replies; 31+ messages in thread
From: Michael Ben-Gershon @ 2004-02-11 8:58 UTC (permalink / raw
To: linux-smp
I received the following message from the kernel:
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
I am not quite sure what I am meant to report. I am using an ASUS
P4S800 board. kernel 2.4.24 (standard).
The stuff I think is relevant from dmesg is as follows:
If there is anything else I can help with, please let me know.
=======================================================================
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
00:00:02[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
=======================================================================
Michael Ben-Gershon
mybg@netvision.net.il
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-03-10 15:52 John W. Sopko Jr.
0 siblings, 0 replies; 31+ messages in thread
From: John W. Sopko Jr. @ 2004-03-10 15:52 UTC (permalink / raw
To: linux-smp
I have been having problems with my system locking up. I saw the
following in /var/log/messages. I am running:
Red Hat Enterpise linux AS with the latest kernel, 2.4.21-9.0.1.ELsmp
It is a single P4 processor system running in hyperthread mode, that is
itis running the smp kernel. Let me know if you want more info.
Mar 10 10:38:08 lark kernel: ESR value after enabling vector: 00000000
Mar 10 10:38:08 lark kernel: Booting processor 1/1 eip 2000
Mar 10 10:38:08 lark kernel: Initializing CPU#1
Mar 10 10:38:08 lark kernel: masked ExtINT on CPU#1
Mar 10 10:38:08 lark kernel: ESR value before enabling vector: 00000000
Mar 10 10:38:08 lark kernel: ESR value after enabling vector: 00000000
Mar 10 10:38:08 lark kernel: Calibrating delay loop... 5583.66 BogoMIPS
Mar 10 10:38:08 lark kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 10 10:38:08 lark kernel: CPU: L2 cache: 512K
Mar 10 10:38:08 lark kernel: CPU: Physical Processor ID: 0
Mar 10 10:38:08 lark kernel: Intel machine check reporting enabled on CPU#1.
Mar 10 10:38:08 lark rpc.statd[913]: Version 1.0.5 Starting
Mar 10 10:38:08 lark kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping 09
Mar 10 10:38:08 lark kernel: Total of 2 processors activated (11154.22
BogoMIPS).
Mar 10 10:38:08 lark kernel: ENABLING IO-APIC IRQs
Mar 10 10:38:08 lark kernel: Setting 2 in the phys_id_present_map
Mar 10 10:38:08 lark kernel: ...changing IO-APIC physical APIC ID to 2
... ok.
Mar 10 10:38:08 lark nfslock: rpc.statd startup succeeded
Mar 10 10:38:08 lark kernel: ..TIMER: vector=0x31 pin1=-1 pin2=0
Mar 10 10:38:08 lark kernel: ...trying to set up timer (IRQ0) through
the 8259A ...
Mar 10 10:38:08 lark kernel: ..... (found pin 0) ...works.
Mar 10 10:38:08 lark kernel: testing the IO APIC.......................
Mar 10 10:38:08 lark kernel:
Mar 10 10:38:08 lark kernel: An unexpected IO-APIC was found. If this
kernel release is less than
Mar 10 10:38:08 lark kernel: three months old please report this to
linux-smp@vger.kernel.org
Mar 10 10:38:08 lark kernel: .................................... done.
Mar 10 10:38:08 lark kernel: Using local APIC timer interrupts.
Mar 10 10:38:08 lark kernel: calibrating APIC timer ...
Mar 10 10:38:08 lark kernel: ..... CPU clock speed is 2793.2953 MHz.
Mar 10 10:38:08 lark kernel: ..... host bus clock speed is 199.5208 MHz.
Mar 10 10:38:08 lark kernel: cpu: 0, clocks: 1995208, slice: 665069
Mar 10 10:38:08 lark kernel:
CPU0<T0:1995200,T1:1330128,D:3,S:665069,C:1995208>
Mar 10 10:38:08 lark kernel: cpu: 1, clocks: 1995208, slice: 665069
Mar 10 10:38:08 lark kernel:
CPU1<T0:1995200,T1:665056,D:6,S:665069,C:1995208>
Mar 10 10:38:08 lark kernel: cpu_sibling_map[0] = 1
Mar 10 10:38:08 lark kernel: cpu_sibling_map[1] = 0
Mar 10 10:38:08 lark kernel: mapping CPU#0's runqueue to CPU#1's runqueue.
Mar 10 10:38:08 lark kernel: zapping low mappings.
Mar 10 10:38:08 lark kernel: Starting migration thread for cpu 0
Mar 10 10:38:08 lark kernel: Starting migration thread for cpu 1
--
John W. Sopko Jr. University of North Carolina
email: sopko AT cs.unc.edu Computer Science Dept., CB 3175
Phone: 919-962-1844 Sitterson Hall; Room 044
Fax: 919-962-1799 Chapel Hill, NC 27599-3175
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-03-10 20:45 novak_martinek
0 siblings, 0 replies; 31+ messages in thread
From: novak_martinek @ 2004-03-10 20:45 UTC (permalink / raw
To: linux-smp
Hello,
it is motherboard ASUS P4P800. BIOS version P4P81015.
Best regards
MArtin Novak
Linux version 2.4.20-30.9smp (bhcompile@porky.devel.redhat.com) (gcc version
3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Wed Feb 4 20:36:46 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 130864
zone(0): 4096 pages.
zone(1): 126768 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f9e30
RSD PTR v0 [ACPIAM]
__va_range(0x1ff30000, 0x68): idx=10 mapped at ffff5000
ACPI table found: RSDT v1 [A M I OEMRSDT 256.1064]
__va_range(0x1ff30200, 0x24): idx=10 mapped at ffff5000
__va_range(0x1ff30200, 0x81): idx=10 mapped at ffff5000
ACPI table found: FACP v2 [A M I OEMFACP 256.1064]
__va_range(0x1ff30390, 0x24): idx=10 mapped at ffff5000
__va_range(0x1ff30390, 0x5c): idx=10 mapped at ffff5000
ACPI table found: APIC v1 [A M I OEMAPIC 256.1064]
__va_range(0x1ff30390, 0x5c): idx=10 mapped at ffff5000
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
LAPIC (acpi_id[0x0002] id[0x1] enabled[1])
CPU 1 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16
IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
2 CPUs total
Local APIC address fee00000
__va_range(0x1ff40040, 0x24): idx=10 mapped at ffff5000
__va_range(0x1ff40040, 0x3f): idx=10 mapped at ffff5000
ACPI table found: OEMB v1 [A M I OEMBIOS 256.1064]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: ASUSTek Product ID: APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 3335.505 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6658.45 BogoMIPS
Memory: 509928k/523456k available (1493k kernel code, 10964k reserved, 1099k
data, 156k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
per-CPU timeslice cutoff: 1462.93 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6658.45 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
Total of 2 processors activated (13316.91 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-03-16 19:32 Vincent M Caruso
0 siblings, 0 replies; 31+ messages in thread
From: Vincent M Caruso @ 2004-03-16 19:32 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 687 bytes --]
As instructed I am forewarding/ reporting a problem regarding the latest
Red Hat Enterprise WS 3 installed kernel which is an apparent conflict with
my machine. See attached logs for your analysis. Could you please tell me
if there is a fix, either temporary or permanent that I can apply. Or
let me know if there is a timeline to add support for this ASUS P4P800
mother board and what ever the features on the mother board that Linux does
not seem to be liking which is causing the unexpected IO-APIC.
Thanks
Vince Caruso
Cartographer- Linux administrator
US Geological Survey
Red Hat Enterprise Linux Customer number 608648
703-648-4586
(See attached file: error_logs.doc)
[-- Attachment #2: error_logs.doc --]
[-- Type: application/msword, Size: 44544 bytes --]
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2004-04-24 21:25 OXYGEN Web Solutions
0 siblings, 0 replies; 31+ messages in thread
From: OXYGEN Web Solutions @ 2004-04-24 21:25 UTC (permalink / raw
To: linux-smp
Dear Master,
i found this error in bootup process of my REDHAT Linux 9, i was installed
2.4.20-31.9smp 2-3 days ago. i have Dual XEON 2.4 HT.
the error:
======================================
testing the IO APIC.......................
Apr 24 01:31:28 w kernel:
Apr 24 01:31:28 w kernel: An unexpected IO-APIC was found. If this kernel
release is less than
Apr 24 01:31:28 w kernel: three months old please report this to
linux-smp@vger.kernel.org
Apr 24 01:31:28 w kernel: .................................... done.
======================================
Best regards, omid
OXYGEN Web Solutions
http://www.oxygenws.com
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found.
@ 2004-06-01 17:53 Sérgio M. Basto
0 siblings, 0 replies; 31+ messages in thread
From: Sérgio M. Basto @ 2004-06-01 17:53 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 1582 bytes --]
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
well is just 1 pentium 4 xeon with HT, on one mother board asus
http://www.asus.com.tw/support/download/item.aspx?ModelName=P4S800-MX&Type=All&SLanguage=en-us
but since is asked. The computer works fine, I upgrade for the latest
bios but have no effects, ACPI works fine.
root@rh10:~#cat /proc/interrupts
CPU0
0: 3139566 local-APIC-edge timer
1: 33012 IO-APIC-edge keyboard
8: 1 IO-APIC-edge rtc
12: 789425 IO-APIC-edge PS/2 Mouse
14: 174518 IO-APIC-edge ide0
15: 482394 IO-APIC-edge ide1
18: 90 IO-APIC-level SiS SI7012
19: 735141 IO-APIC-level eth0
20: 0 none acpi, usb-ohci
21: 0 IO-APIC-level usb-ohci
23: 0 IO-APIC-level ehci_hcd
NMI: 0
LOC: 3139527
ERR: 0
MIS: 0
root@rh10:~#cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 5
cpu MHz : 2800.834
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5583.66
thanks,
Sergio M. B.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 12768 bytes --]
Linux version 2.4.27-pre4 (root@rh10.fe.up.pt) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #2 Mon May 31 19:34:56 WEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003dffc000 (usable)
BIOS-e820: 000000003dffc000 - 000000003dfff000 (ACPI data)
BIOS-e820: 000000003dfff000 - 000000003e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
95MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 253948
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 24572 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5700
ACPI: RSDT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc000
ACPI: FADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc0c0
ACPI: BOOT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc030
ACPI: MADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc058
ACPI: DSDT (v001 ASUS P4S800MX 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
Using ACPI (MADT) for SMP configuration information
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 2800.834 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5583.66 BogoMIPS
Memory: 1000632k/1015792k available (1531k kernel code, 14772k reserved, 592k data, 156k init, 98288k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=0 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2800.8321 MHz.
..... host bus clock speed is 200.0592 MHz.
cpu: 0, clocks: 2000592, slice: 1000296
CPU0<T0:2000592,T1:1000288,D:8,S:1000296,C:2000592>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
PCI: Using configuration type 1
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:...............................................................................................................................
Table [DSDT](id F004) - 318 Objects with 46 Devices 127 Methods 6 Regions
ACPI Namespace successfully loaded at root c035605c
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000E420 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-0867 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000E430 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.......................................
Initialized 6/6 Regions 0/0 Fields 22/22 Buffers 11/11 Packages (327 nodes)
Executing all Device _STA and_INI methods:.................................................
49 Devices found containing: 49 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
00:00:02[A] -> 2-16 -> IRQ 16 level low
00:00:02[B] -> 2-17 -> IRQ 17 level low
00:00:02[C] -> 2-18 -> IRQ 18 level low
00:00:02[D] -> 2-19 -> IRQ 19 level low
00:00:03[B] -> 2-21 -> IRQ 21 level low
00:00:03[C] -> 2-22 -> IRQ 22 level low
00:00:03[D] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 1 0 0 0 0 1 1 41
03 001 01 0 0 0 0 0 1 1 49
04 001 01 0 0 0 0 0 1 1 51
05 001 01 0 0 0 0 0 1 1 59
06 001 01 0 0 0 0 0 1 1 61
07 001 01 0 0 0 0 0 1 1 69
08 001 01 0 0 0 0 0 1 1 71
09 001 01 0 0 0 0 0 1 1 79
0a 001 01 0 0 0 0 0 1 1 81
0b 001 01 0 0 0 0 0 1 1 89
0c 001 01 0 0 0 0 0 1 1 91
0d 001 01 0 0 0 0 0 1 1 99
0e 001 01 0 0 0 0 0 1 1 A1
0f 001 01 0 0 0 0 0 1 1 A9
10 001 01 1 1 0 1 0 1 1 B1
11 001 01 1 1 0 1 0 1 1 B9
12 001 01 1 1 0 1 0 1 1 C1
13 001 01 1 1 0 1 0 1 1 C9
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
ACPI: Power Button (FF) [PWRF]
acpi_processor-2174 [22] acpi_processor_get_inf: Invalid PBLK length [5]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
hda: ST380011A, ATA DISK drive
blk: queue c037fa80, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 159k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 156k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf8855000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xf8857000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem f8860000
usb.c: new USB bus registered, assigned bus number 3
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 1831368k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2005-02-01 22:30 Marco Iannacone
0 siblings, 0 replies; 31+ messages in thread
From: Marco Iannacone @ 2005-02-01 22:30 UTC (permalink / raw
To: linux-smp
Dear Sirs,
while reading the outcome of dmesg on my system, I found a message requesting
me to report it to you.
my kernel is:
# uname -a
Linux home 2.4.21-273-smp4G #1 SMP Mon Jan 17 13:19:07 UTC 2005 i686 i686 i386
GNU/Linux
I'm running SuSE 9.0 on an Asus P4C800 Deluxe motherboard.
below you can find the dmesg output containing your e-mail address.
if you need additional information, just contact me.
regards,
Marco
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2998.0048 MHz.
..... host bus clock speed is 199.0869 MHz.
cpu: 0, clocks: 199869, slice: 66623
CPU0<T0:199856,T1:133232,D:1,S:66623,C:199869>
cpu: 1, clocks: 199869, slice: 66623
CPU1<T0:199856,T1:66608,D:2,S:66623,C:199869>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2005-03-18 10:30 Andrew Bird
2005-03-18 13:34 ` Erik Mouw
0 siblings, 1 reply; 31+ messages in thread
From: Andrew Bird @ 2005-03-18 10:30 UTC (permalink / raw
To: linux-smp
Hi there
I have several Opteron boards of Tyan Thunder K8SR (S2881) type. They are
reporting 'An unexpected IO-APIC was found' when booted with kernel 2.4.29. I
am reporting this as asked to do in the machines messages file. The machines
are around 1 year old now so I expected them to be recognised by 2.4.29.
Regards
Andrew Bird
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: An unexpected IO-APIC was found
2005-03-18 10:30 Andrew Bird
@ 2005-03-18 13:34 ` Erik Mouw
0 siblings, 0 replies; 31+ messages in thread
From: Erik Mouw @ 2005-03-18 13:34 UTC (permalink / raw
To: Andrew Bird; +Cc: linux-smp
On Fri, Mar 18, 2005 at 10:30:14AM +0000, Andrew Bird wrote:
> I have several Opteron boards of Tyan Thunder K8SR (S2881) type. They are
> reporting 'An unexpected IO-APIC was found' when booted with kernel 2.4.29. I
> am reporting this as asked to do in the machines messages file. The machines
> are around 1 year old now so I expected them to be recognised by 2.4.29.
Randy Dunlap's boilerplate reply:
These messages are informational only, they don't represent a
problem when taken alone.
More info:
Several of these messages have been "fixed"
in later versions of 2.4 and eliminated in Linux 2.6.
They are informational only and don't affect the operations of Linux.
They come from Linux having a known-valid list of IO APIC devices
and that list not being updated very often (hence the message
removal in Linux 2.6).
BTW, you should seriously consider running linux-2.6 on that board. 2.6
has better support for the x86_64 NUMA architecture, both the memory
manager and the scheduler know about it. Since september 2004 I've been
running 2.6.8.1 on a dual CPU 8GB Thunder K8W (S2885, more PCI slots
than an S2881, no on-board scsi controller) and unfortunately it went
down six days ago due to a power failure.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2005-05-04 11:11 Jacques Basson
0 siblings, 0 replies; 31+ messages in thread
From: Jacques Basson @ 2005-05-04 11:11 UTC (permalink / raw
To: linux-smp
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb620, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
PCI: Probing PCI hardware
00:00:09[A] -> 2-17 -> IRQ 17 level low
00:00:09[B] -> 2-18 -> IRQ 18 level low
00:00:09[C] -> 2-19 -> IRQ 19 level low
00:00:09[D] -> 2-16 -> IRQ 16 level low
00:00:03[A] -> 2-20 -> IRQ 20 level low
00:00:03[B] -> 2-21 -> IRQ 21 level low
00:00:03[C] -> 2-22 -> IRQ 22 level low
00:00:03[D] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
..... register #00: 02000000
........ : physical APIC id: 02
........ : Delivery Type: 0
........ : LTS : 0
..... register #01: 00178014
........ : max redirection entries: 0017
........ : PRQ implemented: 1
........ : IO APIC version: 0014
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
..... register #02: 02000000
........ : arbitration: 02
..... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 C1
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 001 01 1 1 0 1 0 1 1 C9
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
..................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
sisfb: Video ROM found and mapped to 0xc00c0000
sisfb: Framebuffer at 0xe0000000, mapped to 0xce807000, size 32768k
sisfb: MMIO at 0xed000000, mapped to 0xd0808000, size 128k
sisfb: Memory heap starting at 32160K, size 32K
sisfb: CRT1 DDC probing failed
sisfb: Mode is 1024x768x32 (60Hz)
sisfb: Initial vbflags 0x0
Console: switching to colour frame buffer device 128x48
sisfb: 2D acceleration is enabled, scroll-mode ypan (auto-max)
fb0: SiS 661 frame buffer device, Version 1.7.10
sisfb: (C) 2001-2004 Thomas Winischhofer.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI parallel port detected: 9710:9845, I/O at 0xbc00(0x0)
parport1: PC-style at 0xbc00 [PCSPP(,...)]
ttyS04 at port 0xac00 (irq = 17) is a 16550A
ttyS05 at port 0xb000 (irq = 17) is a 16550A
ttyS06 at port 0xb400 (irq = 17) is a 16550A
ttyS07 at port 0xb800 (irq = 17) is a 16550A
Software Watchdog Timer: 0.05, timer margin: 60 sec
sis900.c: v1.08.07 11/02/2003
eth0: ICS LAN PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xa800, IRQ 19, 00:0f:ea:cb:bf:22.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: ST380011A, ATA DISK drive
hdc: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: setmax_ext LBA 156301488, native 156299375
hda: 156299375 sectors (80025 MB) w/2048KiB Cache, CHS=9729/255/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
Partition check:
hda: hda1 hda2
hdc: hdc1
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem d0829000
usb.c: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 8 ports detected
host/usb-ohci.c: USB OHCI at membase 0xd082b000, IRQ 20
host/usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0
Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
host/usb-ohci.c: USB OHCI at membase 0xd082d000, IRQ 21
host/usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0
Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
host/usb-ohci.c: USB OHCI at membase 0xd082f000, IRQ 22
host/usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0
Controller (#3)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
intel8x0_measure_ac97_clock: measured 41973 usecs
intel8x0: clocking to 48000
eth0: Media Link On 100mbps full-duplex
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2005-08-16 12:23 De Vivo Giancarlo
0 siblings, 0 replies; 31+ messages in thread
From: De Vivo Giancarlo @ 2005-08-16 12:23 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: text/plain, Size: 95 bytes --]
Hi, I hope that could be useful...
Anyway if you need more info mail me.
Bye
--
Giancarlo
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 17645 bytes --]
Linux version 2.4.31 (root@opteron) (gcc version 3.3.4) #3 SMP Fri Aug 12 17:10:10 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
BIOS-e820: 00000000cff60000 - 00000000cff72000 (ACPI data)
BIOS-e820: 00000000cff72000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
2431MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7380
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
On node 0 totalpages: 851808
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 622432 pages.
ACPI: RSDP (v002 PTLTD ) @ 0x000f7320
ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0xcff6d6f5
ACPI: FADT (v003 SUN SUNmetro 0x06040000 PTEC 0x000f4240) @ 0xcff71db6
ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0xcff71eaa
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xcff71f72
ACPI: DSDT (v001 SUN K85AE 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Unknown CPU [15:5] APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Unknown CPU [15:5] APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: IOAPIC (id[0x03] address[0xd0000000] global_irq_base[0x18])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 17, address 0xd0000000, IRQ 24-27
ACPI: IOAPIC (id[0x04] address[0xd0010000] global_irq_base[0x1c])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 17, address 0xd0010000, IRQ 28-31
ACPI: IOAPIC (id[0x05] address[0xd0500000] global_irq_base[0x20])
IOAPIC[3]: Assigned apic_id 5
IOAPIC[3]: apic_id 5, version 17, address 0xd0500000, IRQ 32-35
ACPI: IOAPIC (id[0x06] address[0xd0510000] global_irq_base[0x24])
IOAPIC[4]: Assigned apic_id 6
IOAPIC[4]: apic_id 6, version 17, address 0xd0510000, IRQ 36-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=Linux-smp ro root=803 hda=ide-scsi hdc=ide-scsi
ide_setup: hda=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2393.195 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4771.02 BogoMIPS
Memory: 3362984k/3407232k available (2458k kernel code, 43852k reserved, 733k data, 168k init, 2489728k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000
CPU0: AMD Opteron(tm) Processor 250 stepping 0a
per-CPU timeslice cutoff: 2925.82 usecs.
masked ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4784.12 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: Common caps: 078bfbff e1d3fbff 00000000 00000000
CPU1: AMD Opteron(tm) Processor 250 stepping 0a
Total of 2 processors activated (9555.14 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-1, 4-2, 4-3, 5-0, 5-1, 5-2, 5-3, 6-0, 6-1, 6-2, 6-3 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2393.4181 MHz.
..... host bus clock speed is 199.4515 MHz.
cpu: 0, clocks: 1994515, slice: 664838
CPU0<T0:1994512,T1:1329664,D:10,S:664838,C:1994515>
cpu: 1, clocks: 1994515, slice: 664838
CPU1<T0:1994512,T1:664832,D:4,S:664838,C:1994515>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfd822, last bus=23
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
ACPI: PCI Root Bridge [PCI1] (00:08)
PCI: Probing PCI hardware (bus 08)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z00D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PB._PRT]
PCI: Probing PCI hardware
00:00:07[A] -> 2-16 -> IRQ 16 level low
00:00:07[B] -> 2-17 -> IRQ 17 level low
00:00:07[C] -> 2-18 -> IRQ 18 level low
00:00:07[D] -> 2-19 -> IRQ 19 level low
00:02:01[A] -> 3-2 -> IRQ 26 level low
00:02:01[B] -> 3-3 -> IRQ 27 level low
00:02:01[C] -> 3-0 -> IRQ 24 level low
00:02:01[D] -> 3-1 -> IRQ 25 level low
00:03:02[A] -> 4-0 -> IRQ 28 level low
00:03:01[A] -> 4-3 -> IRQ 31 level low
00:03:01[C] -> 4-1 -> IRQ 29 level low
00:03:01[D] -> 4-2 -> IRQ 30 level low
00:0e:02[A] -> 5-1 -> IRQ 33 level low
00:0e:02[B] -> 5-2 -> IRQ 34 level low
00:0e:02[C] -> 5-3 -> IRQ 35 level low
00:0e:02[D] -> 5-0 -> IRQ 32 level low
00:13:04[A] -> 6-3 -> IRQ 39 level low
00:13:04[B] -> 6-2 -> IRQ 38 level low
00:13:03[A] -> 6-0 -> IRQ 36 level low
00:13:03[B] -> 6-1 -> IRQ 37 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 4.
number of IO-APIC #4 registers: 4.
number of IO-APIC #5 registers: 4.
number of IO-APIC #6 registers: 4.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 1 0 1 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00030011
....... : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 D9
01 003 03 1 1 0 1 0 1 1 E1
02 003 03 1 1 0 1 0 1 1 C9
03 003 03 1 1 0 1 0 1 1 D1
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00030011
....... : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 E9
01 003 03 1 1 0 1 0 1 1 3A
02 003 03 1 1 0 1 0 1 1 42
03 003 03 1 1 0 1 0 1 1 32
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00030011
....... : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 62
01 003 03 1 1 0 1 0 1 1 4A
02 003 03 1 1 0 1 0 1 1 52
03 003 03 1 1 0 1 0 1 1 5A
IO APIC #6......
.... register #00: 06000000
....... : physical APIC id: 06
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00030011
....... : max redirection entries: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 7A
01 003 03 1 1 0 1 0 1 1 82
02 003 03 1 1 0 1 0 1 1 72
03 003 03 1 1 0 1 0 1 1 6A
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ24 -> 1:0
IRQ25 -> 1:1
IRQ26 -> 1:2
IRQ27 -> 1:3
IRQ28 -> 2:0
IRQ29 -> 2:1
IRQ30 -> 2:2
IRQ31 -> 2:3
IRQ32 -> 3:0
IRQ33 -> 3:1
IRQ34 -> 3:2
IRQ35 -> 3:3
IRQ36 -> 4:0
IRQ37 -> 4:1
IRQ38 -> 4:2
IRQ39 -> 4:3
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xe0000000, mapped to 0xf8815000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
hda: AOPEN COM5232/AAH, ATAPI CD/DVD-ROM drive
hdc: AOPEN DUW1608/ARR, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem driver Revision: 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2005 17:07:05)
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
(scsi2:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
Vendor: SEAGATE Model: ST373307LW Rev: 0007
Type: Direct-Access ANSI SCSI revision: 03
scsi2:A:0:0: Tagged Queuing enabled. Depth 64
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
Partition check:
sda: sda1 sda2 sda3
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2518.800 MB/sec
32regs : 2138.400 MB/sec
pIII_sse : 7369.200 MB/sec
pII_mmx : 6306.000 MB/sec
p5_mmx : 6606.400 MB/sec
raid5: using function: pIII_sse (7369.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
Adding Swap: 2008116k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 3176M
agpgart: Detected AMD On-CPU GART chipset
agpgart: AGP aperture is 128M @ 0xd8000000
hda: attached ide-scsi driver.
hdc: attached ide-scsi driver.
scsi3 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: AOPEN Model: COM5232/AAH Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Vendor: AOPEN Model: DUW1608/ARR Rev: A04b
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi3, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 4x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2006-03-18 10:23 Andreas Schenk
2006-03-18 16:31 ` Randy.Dunlap
0 siblings, 1 reply; 31+ messages in thread
From: Andreas Schenk @ 2006-03-18 10:23 UTC (permalink / raw
To: linux-smp
Hi,
although my kernel release is more than three months old, I dare to send this
report, since it might nevertheless be of some value. I do not understand
what it is about, though, but I do know a little about APIC.
If it is not too much, please let me know, if this mail is of some value and
-- if this is still not too much -- give me some explanation, or a link.
Thanks
Andreas Schenk
I have SuSE linux 9.0, with kernel
<4>Linux version 2.4.21-273-smp4G (root@dilbert) (gcc-Version 3.3.1 (SuSE
Linux)) #1 SMP So Apr 10 10:58:58 CEST 2005
[...]
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23
not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>....... : Delivery Type: 0
<7>....... : LTS : 0
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0020
<7>.... register #02: 00178020
<7>....... : arbitration: 00
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 003 03 0 0 0 0 0 1 1 51
<7> 06 003 03 0 0 0 0 0 1 1 59
<7> 07 003 03 0 0 0 0 0 1 1 61
<7> 08 003 03 0 0 0 0 0 1 1 69
<7> 09 003 03 1 1 0 0 0 1 1 71
<7> 0a 003 03 0 0 0 0 0 1 1 79
<7> 0b 003 03 0 0 0 0 0 1 1 81
<7> 0c 003 03 0 0 0 0 0 1 1 89
<7> 0d 003 03 0 0 0 0 0 1 1 91
<7> 0e 003 03 0 0 0 0 0 1 1 99
<7> 0f 003 03 0 0 0 0 0 1 1 A1
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
[...]
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: An unexpected IO-APIC was found
2006-03-18 10:23 Andreas Schenk
@ 2006-03-18 16:31 ` Randy.Dunlap
0 siblings, 0 replies; 31+ messages in thread
From: Randy.Dunlap @ 2006-03-18 16:31 UTC (permalink / raw
To: Andreas Schenk; +Cc: linux-smp
On Sat, 18 Mar 2006 11:23:11 +0100 Andreas Schenk wrote:
> Hi,
>
> although my kernel release is more than three months old, I dare to send this
> report, since it might nevertheless be of some value. I do not understand
> what it is about, though, but I do know a little about APIC.
>
> If it is not too much, please let me know, if this mail is of some value and
> -- if this is still not too much -- give me some explanation, or a link.
This has been fixed for several years now.
In this case (this specific hardware chipset), register 2 is a
duplicate of register 1 so it is skipped.
This isn't causing any run-time problems.
> Thanks
>
> Andreas Schenk
>
> I have SuSE linux 9.0, with kernel
>
> <4>Linux version 2.4.21-273-smp4G (root@dilbert) (gcc-Version 3.3.1 (SuSE
> Linux)) #1 SMP So Apr 10 10:58:58 CEST 2005
>
> [...]
>
> <4>ENABLING IO-APIC IRQs
> <7>init IO_APIC IRQs
> <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23
> not connected.
> <6>..TIMER: vector=0x31 pin1=2 pin2=0
> <7>number of MP IRQ sources: 16.
> <7>number of IO-APIC #2 registers: 24.
> <6>testing the IO APIC.......................
> <4>
> <7>IO APIC #2......
> <7>.... register #00: 02000000
> <7>....... : physical APIC id: 02
> <7>....... : Delivery Type: 0
> <7>....... : LTS : 0
> <7>.... register #01: 00178020
> <7>....... : max redirection entries: 0017
> <7>....... : PRQ implemented: 1
> <7>....... : IO APIC version: 0020
> <7>.... register #02: 00178020
> <7>....... : arbitration: 00
> <4>An unexpected IO-APIC was found. If this kernel release is less than
> <4>three months old please report this to linux-smp@vger.kernel.org
---
~Randy
^ permalink raw reply [flat|nested] 31+ messages in thread
* An unexpected IO-APIC was found
@ 2008-11-16 12:03 Duane Paddock - Personal
0 siblings, 0 replies; 31+ messages in thread
From: Duane Paddock - Personal @ 2008-11-16 12:03 UTC (permalink / raw
To: linux-smp
[-- Attachment #1: Type: TEXT/PLAIN, Size: 321 bytes --]
I noticed this message in my system logs after replacing the motherboard.
"An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org"
The MB is an ASUS P4S533-MX, quite old, early 2003.
Attached is a complete dmesg for kernel 2.4.36.9
Duane.
[-- Attachment #2: Type: TEXT/PLAIN, Size: 13666 bytes --]
Linux version 2.4.36.9 (root@hebe) (gcc version 3.3.6) #1 Sat Nov 15 14:19:18 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fffc000 (usable)
BIOS-e820: 000000007fffc000 - 000000007ffff000 (ACPI data)
BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524284
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294908 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5670
ACPI: RSDT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @ 0x7fffc000
ACPI: FADT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @ 0x7fffc0c0
ACPI: BOOT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @ 0x7fffc030
ACPI: MADT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @ 0x7fffc058
ACPI: DSDT (v001 ASUS P4S533MX 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
Using ACPI (MADT) for SMP configuration information
Kernel command line: rootflags=data=writeback root=/dev/discs/disc0/part3 ro hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 2793.018 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5570.56 BogoMIPS
Memory: 2069340k/2097136k available (1740k kernel code, 27408k reserved, 569k data, 132k init, 1179632k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2792.9754 MHz.
..... host bus clock speed is 132.9987 MHz.
cpu: 0, clocks: 1329987, slice: 664993
CPU0<T0:1329984,T1:664976,D:15,S:664993,C:1329987>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
00:00:02[A] -> 2-16 -> IRQ 16 level low
00:00:02[B] -> 2-17 -> IRQ 17 level low
00:00:02[C] -> 2-18 -> IRQ 18 level low
00:00:02[D] -> 2-19 -> IRQ 19 level low
00:00:03[B] -> 2-21 -> IRQ 21 level low
00:00:03[C] -> 2-22 -> IRQ 22 level low
00:00:03[D] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178080
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
....... : arbitration: 02
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 B1
11 001 01 1 1 0 1 0 1 1 B9
12 001 01 1 1 0 1 0 1 1 C1
13 001 01 1 1 0 1 0 1 1 C9
14 001 01 0 1 0 1 0 1 1 A9
15 001 01 1 1 0 1 0 1 1 D1
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD1600AAJB-00PVA0, ATA DISK drive
hdb: WDC WD1600AAJB-00PVA0, ATA DISK drive
hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p2 p3
/dev/ide/host0/bus0/target1/lun0: p2 p3
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
Adding Swap: 2008084k swap-space (priority 1)
Adding Swap: 2008084k swap-space (priority 1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Real Time Clock Driver v1.10f
i2c-core.o: i2c core module version 2.10.5 (20071024)
i2c-dev.o: i2c /dev entries driver module version 2.10.5 (20071024)
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.07 Wed Jul 2 12:17:43 PDT 2008
D-Link DL2000-based linux driver v1.19 2003/12/16
eth0: D-Link DGE-550T Gigabit Ethernet Adapter, 00:05:5d:95:5c:e9, IRQ 17
sis900.c: v1.08.07 11/02/2003
eth1: Realtek RTL8201 PHY transceiver found at address 1.
eth1: Using transceiver found at address 1 as default
eth1: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 19, 00:0e:a6:2c:81:f2.
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITEON Model: DVD-ROM LTD163 Rev: GDHJ
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-RAM GSA-H55N Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem f8ea4000
usb.c: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xf8eac000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xf8eae000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
intel8x0_measure_ac97_clock: measured 58327 usecs
intel8x0: clocking to 48000
usb.c: registered new driver snd-usb-audio
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
i2c-proc.o version 2.10.5 (20071024)
i2c-isa.o version 2.10.7 (20080701)
i2c-dev.o: Registered 'ISA main adapter' as minor 0
i2c-proc.o version 2.10.5 (20071024)
it87.o version 2.10.7 (20080701)
it87: Found IT8705F chip at 0x290, revision 2
eth0: Link off
hub.c: new USB device 00:03.1-1, assigned address 2
hiddev0: USB HID v1.11 Device [Belkin Belkin UPS] on usb3:2.0
hub.c: new USB device 00:03.1-2, assigned address 3
input: USB HID v1.00 Device [Griffin Technology, Inc. radioSHARK] on usb3:3.2
eth0: Link up
Auto 1000 Mbps, Full duplex
Enable Tx Flow Control
Enable Rx Flow Control
hub.c: new USB device 00:03.0-1, assigned address 2
input: USB HID v1.00 Keyboard [0430:0005] on usb2:2.0
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
eth0: no IPv6 routers present
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: Detected SiS 651 chipset
agpgart: AGP aperture is 64M @ 0xf0000000
i2c-dev.o: Registered 'NVIDIA i2c adapter 0 at 1:00.0' as minor 1
i2c-dev.o: Registered 'NVIDIA i2c adapter 1 at 1:00.0' as minor 2
i2c-dev.o: Registered 'NVIDIA i2c adapter 2 at 1:00.0' as minor 3
eth1: Media Link On 100mbps full-duplex
eth1: no IPv6 routers present
^ permalink raw reply [flat|nested] 31+ messages in thread
end of thread, other threads:[~2008-11-16 12:03 UTC | newest]
Thread overview: 31+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-16 12:23 An unexpected IO-APIC was found De Vivo Giancarlo
-- strict thread matches above, loose matches on Subject: below --
2008-11-16 12:03 Duane Paddock - Personal
2006-03-18 10:23 Andreas Schenk
2006-03-18 16:31 ` Randy.Dunlap
2005-05-04 11:11 Jacques Basson
2005-03-18 10:30 Andrew Bird
2005-03-18 13:34 ` Erik Mouw
2005-02-01 22:30 Marco Iannacone
2004-06-01 17:53 Sérgio M. Basto
2004-04-24 21:25 OXYGEN Web Solutions
2004-03-16 19:32 Vincent M Caruso
2004-03-10 20:45 novak_martinek
2004-03-10 15:52 John W. Sopko Jr.
2004-02-11 8:58 Michael Ben-Gershon
2004-02-03 0:11 Aron Lentsch
2004-02-01 9:58 Reiner Miericke
2004-01-07 11:25 Thorsten Sedeke
2003-12-21 23:18 Luc Van Rompaey
2003-12-05 23:48 Jens-S. Voeckler
2003-11-06 7:25 Ole Lindbjerg
2003-09-11 0:29 Andriy Rysin
2003-09-02 3:48 ratan
2003-08-28 20:57 Kelvin Wilcox
2003-08-26 0:20 Eric C. Cooper
2003-08-23 11:45 Renzo Toma
2003-07-24 22:03 Klaas de Waal
[not found] <20030711174300.52EFB40042@papaya>
2003-07-11 16:16 ` Gerbrand Oudenaarden
2003-07-11 20:43 ` Randy.Dunlap
2003-06-29 20:18 An Unexpected IO-APIC Was Found Joel Doerr
2003-01-31 2:40 An unexpected IO-APIC was found Steve Ripps
2002-10-30 21:31 An Unexpected " Jonathan Thorpe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).