From: Arnd Bergmann <arnd@kernel.org>
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: linux-sh@vger.kernel.org, Rich Felker <dalias@libc.org>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 2/4] sh: remove unused sh4-202 support
Date: Wed, 2 Aug 2023 20:48:47 +0200 [thread overview]
Message-ID: <20230802184849.1019466-2-arnd@kernel.org> (raw)
In-Reply-To: <20230802184849.1019466-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
This early prototype of the SH4 CPU was only used in
the "microdev" board that is now removed, so all of the
sh4-202 supoprt can also be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/sh/Kconfig | 5 -
arch/sh/kernel/cpu/sh4/Makefile | 4 -
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 174 -------------------------
arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 139 --------------------
4 files changed, 322 deletions(-)
delete mode 100644 arch/sh/kernel/cpu/sh4/clock-sh4-202.c
delete mode 100644 arch/sh/kernel/cpu/sh4/setup-sh4-202.c
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d3df67f215ca5..d785329e57151 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -383,10 +383,6 @@ config CPU_SUBTYPE_SH7760
bool "Support SH7760 processor"
select CPU_SH4
-config CPU_SUBTYPE_SH4_202
- bool "Support SH4-202 processor"
- select CPU_SH4
-
# SH-4A Processor Support
config CPU_SUBTYPE_SH7723
@@ -517,7 +513,6 @@ config SH_PCLK_FREQ
CPU_SUBTYPE_SH7263 || \
CPU_SUBTYPE_MXG
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
- default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
help
This option is used to specify the peripheral clock frequency.
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 00c16331e07e5..02e3ee16e15ce 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -23,15 +23,11 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
# Primary on-chip clocks (common)
ifndef CONFIG_CPU_SH4A
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
endif
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
-
obj-y += $(clock-y)
obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763cb25..0000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3 0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
- int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
- int divisor = clk->parent->rate / rate;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
- if (frqcr3_divisors[i] == divisor)
- return frqcr3_values[i];
-
- /* Safe fallback */
- return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
- .recalc = emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
- .recalc = femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
- int i;
-
- /*
- * For some reason, the shoc_clk seems to be set to some really
- * insane value at boot (values outside of the allowable frequency
- * range for instance). We deal with this by scaling it back down
- * to something sensible just in case.
- *
- * Start scaling from the high end down until we find something
- * that passes rate verification..
- */
- for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
- int divisor = frqcr3_divisors[i];
-
- if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
- break;
- }
-
- WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
- int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
- return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *bclk = clk_get(NULL, "bus_clk");
- unsigned long bclk_rate = clk_get_rate(bclk);
-
- clk_put(bclk);
-
- if (rate > bclk_rate)
- return 1;
- if (rate > 66000000)
- return 1;
-
- return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long frqcr3;
- unsigned int tmp;
-
- /* Make sure we have something sensible to switch to */
- if (shoc_clk_verify_rate(clk, rate) != 0)
- return -EINVAL;
-
- tmp = frqcr3_lookup(clk, rate);
-
- frqcr3 = __raw_readl(CPG2_FRQCR3);
- frqcr3 &= ~(0x0007 << 6);
- frqcr3 |= tmp << 6;
- __raw_writel(frqcr3, CPG2_FRQCR3);
-
- clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
- return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
- .init = shoc_clk_init,
- .recalc = shoc_clk_recalc,
- .set_rate = shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
- .flags = CLK_ENABLE_ON_INIT,
- .ops = &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
- &sh4202_emi_clk,
- &sh4202_femi_clk,
- &sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
- CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
- CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
- struct clk *clk;
- int i, ret = 0;
-
- cpg_clk_init();
-
- clk = clk_get(NULL, "master_clk");
- for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
- struct clk *clkp = sh4202_onchip_clocks[i];
-
- clkp->parent = clk;
- ret |= clk_register(clkp);
- }
-
- clk_put(clk);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index 363463e53d99c..0000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- * Copyright (C) 2009 Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct scif_platform_data scif0_platform_data = {
- .scscr = SCSCR_REIE,
- .type = PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xffe80000, 0x100),
- DEFINE_RES_IRQ(evt2irq(0x700)),
- DEFINE_RES_IRQ(evt2irq(0x720)),
- DEFINE_RES_IRQ(evt2irq(0x760)),
- DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .resource = scif0_resources,
- .num_resources = ARRAY_SIZE(scif0_resources),
- .dev = {
- .platform_data = &scif0_platform_data,
- },
-};
-
-static struct sh_timer_platform_data tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(evt2irq(0x400)),
- DEFINE_RES_IRQ(evt2irq(0x420)),
- DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
- .name = "sh-tmu",
- .id = 0,
- .dev = {
- .platform_data = &tmu0_platform_data,
- },
- .resource = tmu0_resources,
- .num_resources = ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
- return platform_add_devices(sh4202_devices,
- ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
- &scif0_device,
- &tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
- sh_early_platform_add_devices(sh4202_early_devices,
- ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
- UNUSED = 0,
-
- /* interrupt sources */
- IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
- INTC_VECT(HUDI, 0x600),
- INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
- INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
- INTC_VECT(RTC, 0x4c0),
- INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
- INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
- INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
- { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
- { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
- { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
- NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
- INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
- INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
- NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
- register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR 0xffd00000UL
-#define INTC_ICR_IRLM (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
- switch (mode) {
- case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
- __raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_intc_controller(&intc_desc_irlm);
- break;
- default:
- BUG();
- }
-}
--
2.39.2
next prev parent reply other threads:[~2023-08-02 18:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-02 18:48 [PATCH 1/4] sh: remove stale microdev board Arnd Bergmann
2023-08-02 18:48 ` Arnd Bergmann [this message]
2023-09-08 10:00 ` [PATCH 2/4] sh: remove unused sh4-202 support John Paul Adrian Glaubitz
2023-08-02 18:48 ` [PATCH 3/4] sh: remove superhyway bus support Arnd Bergmann
2023-08-03 7:58 ` D. Jeff Dionne
2023-08-03 8:44 ` John Paul Adrian Glaubitz
2023-08-03 9:19 ` Arnd Bergmann
2023-08-03 9:36 ` John Paul Adrian Glaubitz
2023-08-03 9:58 ` Arnd Bergmann
2023-09-08 10:02 ` John Paul Adrian Glaubitz
2023-08-02 18:48 ` [PATCH 4/4] sh: machvec: remove custom ioport_{un,}map() Arnd Bergmann
2023-09-08 10:10 ` John Paul Adrian Glaubitz
2023-09-08 10:20 ` Geert Uytterhoeven
2023-09-08 10:21 ` John Paul Adrian Glaubitz
2023-09-08 10:23 ` John Paul Adrian Glaubitz
2023-09-13 12:32 ` Geert Uytterhoeven
2023-09-13 14:08 ` Arnd Bergmann
2023-09-13 14:13 ` Geert Uytterhoeven
2023-09-13 14:30 ` Arnd Bergmann
2023-09-14 6:23 ` John Paul Adrian Glaubitz
2023-09-14 15:56 ` Arnd Bergmann
2023-09-15 15:41 ` Geert Uytterhoeven
2023-09-15 15:49 ` Arnd Bergmann
2023-09-21 7:45 ` John Paul Adrian Glaubitz
2023-09-21 8:52 ` Geert Uytterhoeven
2023-09-25 7:08 ` Yoshinori Sato
2023-09-25 7:36 ` Arnd Bergmann
2023-09-26 22:15 ` John Paul Adrian Glaubitz
2023-09-08 9:59 ` [PATCH 1/4] sh: remove stale microdev board John Paul Adrian Glaubitz
2023-09-09 22:06 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230802184849.1019466-2-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=dalias@libc.org \
--cc=geert+renesas@glider.be \
--cc=glaubitz@physik.fu-berlin.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).