From: Hugo Villeneuve <hugo@hugovil.com>
To: "Konstantin P." <ria.freelander@gmail.com>
Cc: "Konstantin Pugin" <rilian.la.te@ya.ru>,
krzk@kernel.org, conor@kernel.org, lkp@intel.com, vz@mleia.com,
robh@kernel.org, jcmvbkbc@gmail.com, nicolas.ferre@microchip.com,
manikanta.guntupalli@amd.com, corbet@lwn.net,
ychuang3@nuvoton.com, u.kleine-koenig@pengutronix.de,
Maarten.Brock@sttls.nl, "Andy Shevchenko" <andy@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Herve Codina" <herve.codina@bootlin.com>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Hugo Villeneuve" <hvilleneuve@dimonoff.com>,
"Lech Perczak" <lech.perczak@camlingroup.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: Re: [PATCH v8 3/3] serial: sc16is7xx: add support for EXAR XR20M1172 UART
Date: Thu, 25 Apr 2024 11:48:24 -0400 [thread overview]
Message-ID: <20240425114824.2898f89cbe9a7096f6018cfb@hugovil.com> (raw)
In-Reply-To: <CAF1WSux0DX6KrQrPAVXvLefPPVFeCHSPuLPa+X7rL8j0o60LEw@mail.gmail.com>
On Thu, 25 Apr 2024 18:43:20 +0300
"Konstantin P." <ria.freelander@gmail.com> wrote:
> On Thu, Apr 25, 2024 at 6:26 PM Hugo Villeneuve <hugo@hugovil.com> wrote:
> >
> > On Wed, 24 Apr 2024 22:18:54 +0300
> > Konstantin Pugin <rilian.la.te@ya.ru> wrote:
> >
> > Hi Konstantin,
> >
> > > From: Konstantin Pugin <ria.freelander@gmail.com>
> > >
> > > XR20M1172 register set is mostly compatible with SC16IS762, but it has
> > > a support for additional division rates of UART with special DLD register.
> >
> > -> "... but it supports additional division rates with special..."
> >
> > > So, add handling this register by appropriate devicetree bindings.
> >
> > I am not sure about this, support for DLD is added in the driver,
> > not in device tree. You can probably drop that sentence?
> >
> > >
> > > Reviewed-by: Andy Shevchenko <andy@kernel.org>
> > > Signed-off-by: Konstantin Pugin <ria.freelander@gmail.com>
> > > ---
> > > drivers/tty/serial/Kconfig | 3 +-
> > > drivers/tty/serial/sc16is7xx.c | 61 ++++++++++++++++++++++++++++--
> > > drivers/tty/serial/sc16is7xx.h | 1 +
> > > drivers/tty/serial/sc16is7xx_i2c.c | 1 +
> > > drivers/tty/serial/sc16is7xx_spi.c | 1 +
> > > 5 files changed, 62 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> > > index 4fdd7857ef4d..9d0438cfe147 100644
> > > --- a/drivers/tty/serial/Kconfig
> > > +++ b/drivers/tty/serial/Kconfig
> > > @@ -1029,7 +1029,7 @@ config SERIAL_SC16IS7XX_CORE
> > > select SERIAL_SC16IS7XX_SPI if SPI_MASTER
> > > select SERIAL_SC16IS7XX_I2C if I2C
> > > help
> > > - Core driver for NXP SC16IS7xx UARTs.
> > > + Core driver for NXP SC16IS7xx and compatible UARTs.
> > > Supported ICs are:
> > >
> > > SC16IS740
> > > @@ -1038,6 +1038,7 @@ config SERIAL_SC16IS7XX_CORE
> > > SC16IS752
> > > SC16IS760
> > > SC16IS762
> > > + XR20M1172 (Exar)
> > >
> > > The driver supports both I2C and SPI interfaces.
> > >
> > > diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> > > index dfcc804f558f..09c9e52d7ec2 100644
> > > --- a/drivers/tty/serial/sc16is7xx.c
> > > +++ b/drivers/tty/serial/sc16is7xx.c
> > > @@ -10,6 +10,7 @@
> > > #undef DEFAULT_SYMBOL_NAMESPACE
> > > #define DEFAULT_SYMBOL_NAMESPACE SERIAL_NXP_SC16IS7XX
> > >
> > > +#include <linux/bitfield.h>
> > > #include <linux/clk.h>
> > > #include <linux/delay.h>
> > > #include <linux/device.h>
> > > @@ -68,6 +69,7 @@
> > > /* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
> > > #define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */
> > > #define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */
> > > +#define XR20M117X_DLD_REG (0x02) /* Divisor Fractional Register */
> >
> > Remove "Register".
> >
> > Also, DLD register needs EFR[4] = 1 to be accessed, so maybe add this
> > to the comment:
> >
> > /* Divisor Fractional (requires EFR[4] = 1) */
> >
> >
> > >
> > > /* Enhanced Register set: Only if (LCR == 0xBF) */
> > > #define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */
> > > @@ -221,6 +223,20 @@
> > > #define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0)
> > > #define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4)
> > >
> > > +/*
> > > + * Divisor Fractional Register bits (EXAR extension).
> > > + * EXAR hardware is mostly compatible with SC16IS7XX, but supports additional feature:
> > > + * 4x and 8x divisor, instead of default 16x. It has a special register to program it.
> > > + * Bits 0 to 3 is fractional divisor, it used to set value of last 16 bits of
> > > + * uartclk * (16 / divisor) / baud, in case of default it will be uartclk / baud.
> > > + * Bits 4 and 5 used as switches, and should not be set to 1 simultaneously.
> > > + */
> > > +
> > > +#define XR20M117X_DLD_16X 0
> > > +#define XR20M117X_DLD_DIV_MASK GENMASK(3, 0)
> > > +#define XR20M117X_DLD_8X BIT(4)
> > > +#define XR20M117X_DLD_4X BIT(5)
> > > +
> > > /*
> > > * TLR register bits
> > > * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
> > > @@ -523,6 +539,13 @@ const struct sc16is7xx_devtype sc16is762_devtype = {
> > > };
> > > EXPORT_SYMBOL_GPL(sc16is762_devtype);
> > >
> > > +const struct sc16is7xx_devtype xr20m1172_devtype = {
> > > + .name = "XR20M1172",
> > > + .nr_gpio = 8,
> > > + .nr_uart = 2,
> > > +};
> > > +EXPORT_SYMBOL_GPL(xr20m1172_devtype);
> > > +
> > > static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
> > > {
> > > switch (reg) {
> > > @@ -555,18 +578,43 @@ static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg)
> > > return reg == SC16IS7XX_RHR_REG;
> > > }
> > >
> > > +static bool sc16is7xx_has_dld(struct device *dev)
> > > +{
> > > + struct sc16is7xx_port *s = dev_get_drvdata(dev);
> > > +
> > > + if (s->devtype == &xr20m1172_devtype)
> > > + return true;
> > > + return false;
> > > +}
> > > +
> > > static int sc16is7xx_set_baud(struct uart_port *port, int baud)
> > > {
> > > struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
> > > - u8 lcr;
> > > + unsigned long clk = port->uartclk, div, div16;
> > > + bool has_dld = sc16is7xx_has_dld(port->dev);
> > > + u8 dld_mode = XR20M117X_DLD_16X;
> > > u8 prescaler = 0;
> > > - unsigned long clk = port->uartclk, div = clk / 16 / baud;
> > > + u8 divisor = 16;
> > > + u8 lcr;
> > > +
> > > + if (has_dld && DIV_ROUND_CLOSEST(clk, baud) < 16)
> > > + divisor = rounddown_pow_of_two(DIV_ROUND_CLOSEST(clk, baud));
> > > +
> > > + div16 = (clk * 16) / divisor / baud;
> > > + div = div16 / 16;
> > >
> > > if (div >= BIT(16)) {
> > > prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
> > > div /= 4;
> > > }
> > >
> > > + /* Count additional divisor for EXAR devices */
> > > + if (divisor == 8)
> > > + dld_mode = XR20M117X_DLD_8X;
> > > + if (divisor == 4)
> > > + dld_mode = XR20M117X_DLD_4X;
> > > + dld_mode |= FIELD_PREP(XR20M117X_DLD_DIV_MASK, div16);
> > > +
> > > /* Enable enhanced features */
> > > sc16is7xx_efr_lock(port);
> > > sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
> > > @@ -587,12 +635,14 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
> > > regcache_cache_bypass(one->regmap, true);
> > > sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
> > > sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
> > > + if (has_dld)
> > > + sc16is7xx_port_write(port, XR20M117X_DLD_REG, dld_mode);
> > > regcache_cache_bypass(one->regmap, false);
> > >
> > > /* Restore LCR and access to general register set */
> > > sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
> > >
> > > - return DIV_ROUND_CLOSEST(clk / 16, div);
> > > + return DIV_ROUND_CLOSEST(clk / divisor, div);
> > > }
> > >
> > > static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
> > > @@ -1002,6 +1052,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> > > const struct ktermios *old)
> > > {
> > > struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
> > > + bool has_dld = sc16is7xx_has_dld(port->dev);
> > > + u8 divisor = has_dld ? 4 : 16
> >
> > This still breaks compilation. I noted in V7 of the patch to fix this,
> > but obviously you didn't do it, altough you mention that you would do
> > it in your reply to me, and you also mention doing it in your cover
> > letter...
> >
> > This means you didn't test your patchset V8 before sending it. You
> > really need to properly test _before_ sending a new patchset.
> >
> >
> > Hugo.
> >
> >
> >
> >
> > > unsigned int lcr, flow = 0;
> > > int baud;
> > > unsigned long flags;
> > > @@ -1084,7 +1136,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> > > /* Get baud rate generator configuration */
> > > baud = uart_get_baud_rate(port, termios, old,
> > > port->uartclk / 16 / 4 / 0xffff,
> > > - port->uartclk / 16);
> > > + port->uartclk / divisor);
> > >
> > > /* Setup baudrate generator */
> > > baud = sc16is7xx_set_baud(port, baud);
> > > @@ -1684,6 +1736,7 @@ void sc16is7xx_remove(struct device *dev)
> > > EXPORT_SYMBOL_GPL(sc16is7xx_remove);
> > >
> > > const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
> > > + { .compatible = "exar,xr20m1172", .data = &xr20m1172_devtype, },
> > > { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, },
> > > { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, },
> > > { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, },
> > > diff --git a/drivers/tty/serial/sc16is7xx.h b/drivers/tty/serial/sc16is7xx.h
> > > index afb784eaee45..eb2e3bc86f15 100644
> > > --- a/drivers/tty/serial/sc16is7xx.h
> > > +++ b/drivers/tty/serial/sc16is7xx.h
> > > @@ -28,6 +28,7 @@ extern const struct sc16is7xx_devtype sc16is750_devtype;
> > > extern const struct sc16is7xx_devtype sc16is752_devtype;
> > > extern const struct sc16is7xx_devtype sc16is760_devtype;
> > > extern const struct sc16is7xx_devtype sc16is762_devtype;
> > > +extern const struct sc16is7xx_devtype xr20m1172_devtype;
> > >
> > > const char *sc16is7xx_regmap_name(u8 port_id);
> > >
> > > diff --git a/drivers/tty/serial/sc16is7xx_i2c.c b/drivers/tty/serial/sc16is7xx_i2c.c
> > > index 3ed47c306d85..839de902821b 100644
> > > --- a/drivers/tty/serial/sc16is7xx_i2c.c
> > > +++ b/drivers/tty/serial/sc16is7xx_i2c.c
> > > @@ -46,6 +46,7 @@ static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
> > > { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
> > > { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
> > > { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
> > > + { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
> > > { }
> > > };
> > > MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
> > > diff --git a/drivers/tty/serial/sc16is7xx_spi.c b/drivers/tty/serial/sc16is7xx_spi.c
> > > index 73df36f8a7fd..2b278282dbd0 100644
> > > --- a/drivers/tty/serial/sc16is7xx_spi.c
> > > +++ b/drivers/tty/serial/sc16is7xx_spi.c
> > > @@ -69,6 +69,7 @@ static const struct spi_device_id sc16is7xx_spi_id_table[] = {
> > > { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
> > > { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
> > > { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
> > > + { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
> > > { }
> > > };
> > > MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
> > > --
> > > 2.44.0
> > >
> > >
> > >
> >
> >
> > --
> > Hugo Villeneuve
>
> I compiled a kernel before sending on x86. Which options are you
> using? I will try to replicate it. I cannot run this kernel on actual
> hardware, because I need vendor patches - support of my board is not
> mainlined.
Hi,
please reply in line.
Also, in your configuration, did you even bother to check that the SC16
driver is selected? Looks like you did not...
And why do you say in your cover letter that you
fixed this if it is not the case?
Hugo.
next prev parent reply other threads:[~2024-04-25 15:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-24 19:18 [PATCH v8 0/3] add support for EXAR XR20M1172 UART Konstantin Pugin
2024-04-24 19:18 ` [PATCH v8 1/3] serial: sc16is7xx: announce support of SER_RS485_RTS_ON_SEND Konstantin Pugin
2024-04-24 19:18 ` [PATCH v8 2/3] dt-bindings: sc16is7xx: Add compatible line for XR20M1172 UART Konstantin Pugin
2024-04-24 19:34 ` Andy Shevchenko
2024-04-25 7:25 ` Konstantin P.
2024-04-25 9:11 ` Andy Shevchenko
2024-04-24 19:18 ` [PATCH v8 3/3] serial: sc16is7xx: add support for EXAR " Konstantin Pugin
2024-04-25 15:26 ` Hugo Villeneuve
2024-04-25 15:43 ` Konstantin P.
2024-04-25 15:48 ` Hugo Villeneuve [this message]
2024-04-25 10:01 ` [PATCH v8 0/3] " Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240425114824.2898f89cbe9a7096f6018cfb@hugovil.com \
--to=hugo@hugovil.com \
--cc=Maarten.Brock@sttls.nl \
--cc=ajones@ventanamicro.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=conor@kernel.org \
--cc=corbet@lwn.net \
--cc=gregkh@linuxfoundation.org \
--cc=herve.codina@bootlin.com \
--cc=hvilleneuve@dimonoff.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jcmvbkbc@gmail.com \
--cc=jirislaby@kernel.org \
--cc=krzk@kernel.org \
--cc=lech.perczak@camlingroup.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=lkp@intel.com \
--cc=manikanta.guntupalli@amd.com \
--cc=nicolas.ferre@microchip.com \
--cc=ria.freelander@gmail.com \
--cc=rilian.la.te@ya.ru \
--cc=robh@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vz@mleia.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).