From: Sam Protsenko <semen.protsenko@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] arm64: dts: exynos: Add SPI nodes for Exynos850
Date: Thu, 1 Feb 2024 12:30:25 -0600 [thread overview]
Message-ID: <20240201183025.14566-1-semen.protsenko@linaro.org> (raw)
Some USI blocks can be configured as SPI controllers. Add corresponding
SPI nodes to Exynos850 SoC device tree.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240125013858.3986-4-semen.protsenko@linaro.org
[krzysztof: order properties according to DTS coding style]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
- Fix dtschema warnings by specifying "spi" as a first clock
Changes in v2:
- Sorted pinctrl properties properly
arch/arm64/boot/dts/exynos/exynos850.dtsi | 54 +++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index e7e1171a3864..2ba67c3d0681 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -738,6 +738,24 @@ usi_spi_0: usi@139400c0 {
<&cmu_peri CLK_GOUT_SPI0_IPCLK>;
clock-names = "pclk", "ipclk";
status = "disabled";
+
+ spi_0: spi@13940000 {
+ compatible = "samsung,exynos850-spi";
+ reg = <0x13940000 0x30>;
+ clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+ <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+ clock-names = "spi", "spi_busclk0";
+ dmas = <&pdma0 5>, <&pdma0 4>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
usi_cmgp0: usi@11d000c0 {
@@ -779,6 +797,24 @@ serial_1: serial@11d00000 {
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
+
+ spi_1: spi@11d00000 {
+ compatible = "samsung,exynos850-spi";
+ reg = <0x11d00000 0x30>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+ clock-names = "spi", "spi_busclk0";
+ dmas = <&pdma0 12>, <&pdma0 13>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
usi_cmgp1: usi@11d200c0 {
@@ -820,6 +856,24 @@ serial_2: serial@11d20000 {
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
+
+ spi_2: spi@11d20000 {
+ compatible = "samsung,exynos850-spi";
+ reg = <0x11d20000 0x30>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+ clock-names = "spi", "spi_busclk0";
+ dmas = <&pdma0 14>, <&pdma0 15>;
+ dma-names = "tx", "rx";
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi2_pins>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
};
--
2.39.2
next reply other threads:[~2024-02-01 18:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-01 18:30 Sam Protsenko [this message]
2024-02-06 8:05 ` [PATCH v3] arm64: dts: exynos: Add SPI nodes for Exynos850 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240201183025.14566-1-semen.protsenko@linaro.org \
--to=semen.protsenko@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).