From: Nicholas Piggin <npiggin@gmail.com>
To: Thomas Huth <thuth@redhat.com>
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
"Laurent Vivier" <lvivier@redhat.com>,
"Andrew Jones" <andrew.jones@linux.dev>,
linuxppc-dev@lists.ozlabs.org, kvm@vger.kernel.org,
"Alexandru Elisei" <alexandru.elisei@arm.com>,
"Claudio Imbrenda" <imbrenda@linux.ibm.com>,
"David Hildenbrand" <david@redhat.com>,
"Eric Auger" <eric.auger@redhat.com>,
"Janosch Frank" <frankja@linux.ibm.com>,
"Nico Böhr" <nrb@linux.ibm.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
linux-s390@vger.kernel.org, kvmarm@lists.linux.dev,
kvm-riscv@lists.infradead.org
Subject: [kvm-unit-tests PATCH v9 28/31] configure: Make arch_libdir a first-class entity
Date: Sat, 4 May 2024 22:28:34 +1000 [thread overview]
Message-ID: <20240504122841.1177683-29-npiggin@gmail.com> (raw)
In-Reply-To: <20240504122841.1177683-1-npiggin@gmail.com>
arch_libdir was brought in to improve the heuristic determination of
the lib/ directory based on arch and testdir names, but it did not
entirely clean that mess up.
Remove the arch_libdir->arch->testdir heuristic and just require
everybody sets arch_libdir correctly. Fail if the lib/arch or
lib/arch/asm directories can not be found.
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Nico Böhr <nrb@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: kvmarm@lists.linux.dev
Cc: kvm-riscv@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
Makefile | 2 +-
configure | 18 +++++++++++++-----
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/Makefile b/Makefile
index 5b7998b79..7fe93dfd8 100644
--- a/Makefile
+++ b/Makefile
@@ -10,7 +10,7 @@ include config.mak
VPATH = $(SRCDIR)
libdirs-get = $(shell [ -d "lib/$(1)" ] && echo "lib/$(1) lib/$(1)/asm")
-ARCH_LIBDIRS := $(call libdirs-get,$(ARCH_LIBDIR)) $(call libdirs-get,$(TEST_DIR))
+ARCH_LIBDIRS := $(call libdirs-get,$(ARCH_LIBDIR))
OBJDIRS := $(ARCH_LIBDIRS)
DESTDIR := $(PREFIX)/share/kvm-unit-tests/
diff --git a/configure b/configure
index d744ec4dc..2b788d0c8 100755
--- a/configure
+++ b/configure
@@ -216,7 +216,6 @@ fi
arch_name=$arch
[ "$arch" = "aarch64" ] && arch="arm64"
[ "$arch_name" = "arm64" ] && arch_name="aarch64"
-arch_libdir=$arch
if [ "$arch" = "riscv" ]; then
echo "riscv32 or riscv64 must be specified"
@@ -284,8 +283,10 @@ fi
if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
testdir=x86
+ arch_libdir=x86
elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
testdir=arm
+ arch_libdir=$arch
if [ "$target" = "qemu" ]; then
arm_uart_early_addr=0x09000000
elif [ "$target" = "kvmtool" ]; then
@@ -334,6 +335,7 @@ elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
fi
elif [ "$arch" = "ppc64" ]; then
testdir=powerpc
+ arch_libdir=ppc64
firmware="$testdir/boot_rom.bin"
if [ "$endian" != "little" ] && [ "$endian" != "big" ]; then
echo "You must provide endianness (big or little)!"
@@ -344,6 +346,7 @@ elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then
arch_libdir=riscv
elif [ "$arch" = "s390x" ]; then
testdir=s390x
+ arch_libdir=s390x
else
echo "arch $arch is not supported!"
arch=
@@ -353,6 +356,10 @@ if [ ! -d "$srcdir/$testdir" ]; then
echo "$srcdir/$testdir does not exist!"
exit 1
fi
+if [ ! -d "$srcdir/lib/$arch_libdir" ]; then
+ echo "$srcdir/lib/$arch_libdir does not exist!"
+ exit 1
+fi
if [ "$efi" = "y" ] && [ -f "$srcdir/$testdir/efi/run" ]; then
ln -fs "$srcdir/$testdir/efi/run" $testdir-run
@@ -415,10 +422,11 @@ fi
# link lib/asm for the architecture
rm -f lib/asm
asm="asm-generic"
-if [ -d "$srcdir/lib/$arch/asm" ]; then
- asm="$srcdir/lib/$arch/asm"
-elif [ -d "$srcdir/lib/$testdir/asm" ]; then
- asm="$srcdir/lib/$testdir/asm"
+if [ -d "$srcdir/lib/$arch_libdir/asm" ]; then
+ asm="$srcdir/lib/$arch_libdir/asm"
+else
+ echo "$srcdir/lib/$arch_libdir/asm does not exist"
+ exit 1
fi
mkdir -p lib
ln -sf "$asm" lib/asm
--
2.43.0
prev parent reply other threads:[~2024-05-04 12:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240504122841.1177683-1-npiggin@gmail.com>
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 23/31] common/sieve: Use vmalloc.h for setup_mmu definition Nicholas Piggin
2024-06-04 7:53 ` Thomas Huth
2024-05-04 12:28 ` Nicholas Piggin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240504122841.1177683-29-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=alexandru.elisei@arm.com \
--cc=andrew.jones@linux.dev \
--cc=david@redhat.com \
--cc=eric.auger@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm-riscv@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-s390@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lvivier@redhat.com \
--cc=nrb@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).