From: Josua Mayer <josua@solid-run.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Eugene Zaikonnikov <ez@norophonic.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <mwalle@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>
Cc: Yazan Shhady <yazan.shhady@solid-run.com>,
linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-iio@vger.kernel.org,
Rob Herring <robh@kernel.org>,
linux-mtd@lists.infradead.org, Josua Mayer <josua@solid-run.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Suman Anna <s-anna@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>,
MD Danish Anwar <danishanwar@ti.com>
Subject: [PATCH v6 0/7] arm64: dts: add description for solidrun am642 som and hummingboard evb
Date: Mon, 12 Feb 2024 18:38:07 +0100 [thread overview]
Message-ID: <20240212-add-am64-som-v6-0-b59edb2bc8c3@solid-run.com> (raw)
This series adds DT bindings and dts descriptions for SolidRun AM642
based SoM and Hummingboard EVB.
Additionally a commit from downstream vendor kernel are included,
enhancing support for pru based ethernet.
I wasn't sure how to properly annotate it in commit description /
signed-off area ...:
1. add description for "Industrial Ethernet Peripherals" (IEP) to am64
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6
IEP is already supported in-tree by a driver, and used in
k3-am65-main.dtsi.
Unfortunately dtbs_check still reports one problem:
- 'mux-controller' does not match any of the regexes
The expectation seems to be that a mux-controller at minimum has an
address, something to put behind an @, e.g. "mux-controller@7".
However this mux is not on a bus, it is just a gpio-mux,
not sure how to name it better.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v6:
- renamed pinctrl nodes to *-default-pins
(reported by Vignesh Raghavendra <vigneshr@ti.com>)
(dropped Reviewed-by: Andrew Davis <afd@ti.com>)
- removed tabs from pinctrl comments to shorten lines
- updated humidity sensor yaml with interrupts property
- updated spi-nor flash yaml with interrupts property
- Link to v5: https://lore.kernel.org/r/20240211-add-am64-som-v5-0-790ed7121249@solid-run.com
Changes in v5:
- abracon,abx80x.yaml:
- reworded 'compatible' description
- removed $ref to interrupts.yaml
- nested example in fake i2c
- changed maintainer to rtc list
(reported by Conor Dooley <conor@kernel.org>)
- patch 4/5 dts:
- re-added status properties for sdhci nodes
k3-am64-main.dtsi has been changed in-tree since v1
such that sdhci nodes are explicitly status disabled now.
- picked up reviewed-by
(reported by Andrew Davis <afd@ti.com>)
- Link to v4: https://lore.kernel.org/r/20240202-add-am64-som-v4-0-5f8b12af5e71@solid-run.com
Changes in v4:
- abracon,abx80x.yaml: fixed dtc error in example irq reference
- Link to v3: https://lore.kernel.org/r/20240202-add-am64-som-v3-0-2f44023d50e9@solid-run.com
Changes in v3:
- removed lots more status properties, double-checked against soc dtsi
(reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
(reported by Andrew Davis <afd@ti.com>)
- removed intentionally-disabled pcie node from dts
- rewrote yaml bindings to use enum instead of anyof+const+description
(reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
- abracon yaml
- added missing maintainer
- added diode type property type
- added example
(reported by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
- added reference to /schemas/interrupts.yaml#
- use generic name for pru ethernet controller node
(reported by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
- removed unnamed dmas from pru ethernet controller node
- moved pcie/usb3 features to dtb overlays
- Link to v2: https://lore.kernel.org/r/20240112-add-am64-som-v2-0-1385246c428c@solid-run.com
Changes in v2:
- reordered patchset to drop separate patch adding iep handle to som
- moved dtbs_check warnings to cover letter
- converted abracon abx80x rtc bindings to yaml
- updated dts:
- remove unnecessary status properties
- changed non-generic node names
- use color property for led descriptions,
they have no default function on evaluation board
- drop earlycon bootargs from chosen node
(reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
- converted charger node to comment, part not assembled, has no bindings
- picked up acked-by on board bindings patch
- Link to v1: https://lore.kernel.org/r/20240103-add-am64-som-v1-0-dda1f9227aef@solid-run.com
---
Josua Mayer (6):
dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
dt-bindings: rtc: abx80x: convert to yaml
dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
dt-bindings: mtd: spi-nor: add optional interrupts property
arm64: dts: add description for solidrun am642 som and evaluation board
arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
Suman Anna (1):
arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +
.../bindings/iio/humidity/ti,hdc2010.yaml | 3 +
.../devicetree/bindings/mtd/jedec,spi-nor.yaml | 3 +
.../devicetree/bindings/rtc/abracon,abx80x.txt | 31 --
.../devicetree/bindings/rtc/abracon,abx80x.yaml | 79 +++
arch/arm64/boot/dts/ti/Makefile | 7 +
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 24 +
.../boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso | 45 ++
.../boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso | 44 ++
arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts | 292 ++++++++++
arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 594 +++++++++++++++++++++
11 files changed, 1098 insertions(+), 31 deletions(-)
---
base-commit: 83d0ff463b50d2395e05339a34e35d14ba82043f
change-id: 20240101-add-am64-som-51a1ca47edf3
Sincerely,
--
Josua Mayer <josua@solid-run.com>
next reply other threads:[~2024-02-12 17:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-12 17:38 Josua Mayer [this message]
2024-02-12 17:38 ` [PATCH v6 1/7] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T Josua Mayer
2024-02-12 17:38 ` [PATCH v6 2/7] dt-bindings: rtc: abx80x: convert to yaml Josua Mayer
2024-02-12 20:06 ` Alexandre Belloni
2024-02-15 14:04 ` Josua Mayer
2024-02-12 17:38 ` [PATCH v6 3/7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property Josua Mayer
2024-02-15 14:32 ` Rob Herring
2024-02-12 17:38 ` [PATCH v6 4/7] dt-bindings: mtd: spi-nor: " Josua Mayer
2024-02-15 14:32 ` Rob Herring
2024-02-12 17:38 ` [PATCH v6 5/7] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes Josua Mayer
2024-02-12 17:38 ` [PATCH v6 6/7] arm64: dts: add description for solidrun am642 som and evaluation board Josua Mayer
2024-02-12 17:38 ` [PATCH v6 7/7] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240212-add-am64-som-v6-0-b59edb2bc8c3@solid-run.com \
--to=josua@solid-run.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=danishanwar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=ez@norophonic.com \
--cc=grygorii.strashko@ti.com \
--cc=jic23@kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=nm@ti.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=s-anna@ti.com \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).